Compaq cq58: I log out of my system, the code is 74156900

Similar Questions

• Unable to log out of account since the last update

  I can't log out account since recent iTunes update.

  What happens when you try to disconnect? Do you get any error messages?

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• Basket empty automatically whenever I log out. How can I stop this so that I can empty it when I want to?

  When I delete the files they go in the trash and will stay there until I log out and switch on the computer.
  When I turn it back on and open a session in the basket is still empty.
  I can't find any settings to change that.
  Can someone advise?

  Hi Jack,

  Windows Vista does not clear the trash automatically on closing of session/reboots. This must be due to a third-party program (CCleaner / Zone Alarm clear function Cache) you have installed. You may need to consider starting applications and find which of them is the compensation the basket every time.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Mac book pro logging out despite the system preferences settings

  If my computer is turned on for more than 20 minutes without me touching the mouse/keyboard, I am prompted with a request to save my work before disconnection.  If I get bored of the command prompt, I get disconnected.  All of this is that despite what is defined in the system preferences.

  In the menu bar, you select

   ▹ System Preferences... ▹ Security & Privacy

  If there is a padlock icon in the lower left corner of the preferences window, click on it and enter your login password when you are prompted.

  Click on the Advanced button and in the leaf that opens, uncheck the box marked

  Log out after... minutes of inactivity

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• Cq58 Compaq: compaq cq58 system off code 97190297

  This is the code that my Compaq cq58 give me.

  97190297

  Please help me.

  @siltricos

  Enter 28898819

  Kind regards

  DP - K

• I forgot the password admin or bios for compaq CQ58

  My model is Compaq cq58 laptop need bios password or admin am locked out of my own laptop don't remember password.

  Try Brian.

  78763289

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Realtek ethernet error code driver 35, Compaq CQ58, Windows 8.1

  Hello.

  I have a new laptop Compaq CQ58-353EM. It came with preinstalled system (Windows 8). Subsequently, I installed Windows and HP updates.

  The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In Device Manager, it is represented by a yellow triangle with an exclamation point. In the State of the device, it is stated: your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35).

  Laptop has everything system and hp updates installed.

  I have tried the following to resolve the problem:

  -2 versions of various bios (F.26 and F.25).

  -several add/remove/reinstall the Realtek drivers

  -2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (extract from the Realtek site).

  Ethernet works OK on Ubuntu.

  Any suggestions or solutions to this problem?

  New test BIOS

  CQ58 Notebook PC and HP 655

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Compaq CQ58: I forgot the password to power Compaq CQ58

  I just bought a Compaq CQ58 of a pawn shop. When I turn on it requires an administrator password or power on password. It did not come with this information, so I Googled it and saw a few different multi number password that has been proposed to type. None of these work. When I try three times it comes up with "System disabled" and gives the numeric code 96623987. How can I bypass this password?

  Hello:

  Enter the unlock code...

  29781309

• laptop Compaq CQ58: id of failure to the dst short hard drive RGF0R0

  my notebook Compaq CQ58 3 year, husbands, froze and wouldn't respond, after a few hours I force it down by pressing the power button, when I tried to start it up again once he went int automaticic repair, it took more than 24 hours.

  but the computer continues to freeze and go into the auto repair each time and was unusable.

  I don't have a recovery disk, none came with the computer and stupidley has not created a when the computer was new. being the only other computer that I have a windows vista I could not create one on this machine.

  As their was anything important stored on the computer I decided to reset the computer hoping that would solve the problem.

  I followed the instructions and the computer seems to be going through the motions to reinstall when he got stuck in a loop of

  the HP points logo swirling

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  back to points logo and swirling HP

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  After 48 hours I force crashed computer

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Fiona-s wrote:
  
  

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Hello Fiona-s,

  Thanks for posting in the Forum of Support HP!

  I'm afraid that the HARD drive has failed - the question is material one and all simply restore/reinstall will not solve it. Yes, you need to replace the HARD disk new or better with the SSD. SSDS are up to 10 times faster than hard drives:

  > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

  > https://en.wikipedia.org/wiki/Solid-state_drive

  There are more than 100 manufacturers and sellers SSD, but personally, I would choose Samsung, Intel, Toshiba, or OCZ ones.

  Microsoft Windows 7, 8.1, and 10 have supported for SSDS. Vista and XP - no

  You will need a recovery media to restore the windows once you have installed the new SSD or HARD disk.

  You can get possible by contacting HP Support. Here's how:

  > http://support.hp.com/us-en/document/bph07143

  > http://www8.hp.com/us/en/contact-hp/contact.html

  > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  Feel free to post if you have any other questions.

• Compaq cq58-301ew - drivers for windows 7 - where are they?

  Hello
  I bought a laptop compaq cq58-301ew pre-installed with Windows 8, I have no intention to use this system without hope and installed windows 7, but nowhere has the drivers for this system!

  Where can I download the drivers for the bluetooth device? I've tried probably 50 different drivers and none of them work... Maybe someone had a similar problem and indicate what job pilot? Please help because this trash Windows 8 will not work normally...

  Hello:

  Try this bluetooth driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127978_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You should be able to use the rest of the W7 x 64 drivers and software for this model on the link below.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275370

• Compaq CQ58: Nothing works

  Hi guys

  I have a laptop Compaq CQ58 and I tried all the links but nothing works. …
  no Ethernet controller
  No network controller
  No pci devices
  no controller communication simple pci
  No sm bus controller

  Please help its urgent

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C & REV_04
  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C & REV_04
  PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C & REV_01
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1854103C & REV_05
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  Hello:

  Use the W7 32-bit drivers for the HP 2000 t - 2A 00... except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-2000-2a00-notebook-PC-series/5259212/model/5275371

  First install the smbus controller driver and restart.  This, to the Driver and Intel Chipset Installation Utility.

  Ethernet controller: install the Driver Realtek Local Area Network (LAN)

  network controller: install this driver:

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp63802.exe

  PCI device: install the Realtek card reader driver

  PCI simple communication controller: install the Driver Intel Management Engine Interface (MEI)

• Compaq cq58: bios password locked

  I'm locked out compaq CQ58

  Laptop looking for a bios password and give this code: 65487331

  Hello

  Enter: 70585917

  Kind regards

  DP - K

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation