Compaq cq62-423nr: new hard drive will not record cq62 notebook recover

Similar Questions

• R51 new HARD drive will not restore factory correctly state with discs

  I caught a HDD of 80 GB on old computer my gf, and I thought I would use it to replace the 40 GB hard drive in my ThinkPad R51.  There is not really important info on my old hdd, so I just created a factory recovery disks, put on the new hard drive (both are PATA) and ran from Rescue and Recovery.  After completing restore to factory state all the new hard drive will do is Rescue and new Recovery charge.  It does not load Windows.  Is there anything else I need to do?

  Shot in the hip here, but ISTR that some versions of R & R restore the image of 'restoration' in HD, then you restart to R & R and run a restore it to complete the restore of the rest of the car.

  As I said, just something I've seen elsewhere.  Worth, perhaps,

  Z.

• Can't reinstall XP service pack 3 on the new hard drive, will not cross of EULA

  Computer VOstro 220 (Dell) under the age of 18 months. Internal HD died and was replaced two weeks ago with a HD internal 320, the speed of 7200 Western Digital. (Micro Center, a computer store large installed the HD that I bought at the store)

  I used the OEM "reinstall Windows XP service Pack 3" DVD.  With F12 I put the computer to boot from the DVD.

  DVD boots, I chose the option to install the OS

  Fisrt I see the message that the program checks the material. No error message

  Then I see the screen with the words "Windows Setup". Five minutes later, Microsoft EULA (end-user contract) is displayed.  IT does not scroll, I used the arrow keys on the keyboard to get at the end of the EULA was waiting for some kind of "type option"I agree". But there is nothing.

  Nothing more happens. No additional configuration.

  What is the problem? What should I do to get the Windows XP installation to continue?

  Why not install the operating system?

  Anywhere between 5 and 20% (depending on the production) new hard disks are defective. Test your drive with the factory utility.

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• Satellite Pro 2100 - new HARD drive is not booting

  Hello
  I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).

  Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
  Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?

  Any tips?

  Hi Kannengiesser,

  Which is really strange that you can t start up disk even it s recognized in BIOS correctly...

  You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.

  But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.

• Hard drive will not accept any CD or DVD

  I have a MacBook Pro, OS 10.6.8 version.  The hard drive will not accept a CD or a DVD.  Thinking maybe I left a floppy disk in the drive, I tried to eject, but the eject button does not eject anything.  I have not tried to insert a disk for a long time, so do not know how long it could have been a problem without me realizing it. I tried to shut down the computer and restart, but this does not solve the problem.  I did some research using the Apple Hardware Test, but the instructions say insert the Applications install disc 2.  Unfortunately, as I can't insert a disc, I can't deal with the problem in this way?  Any suggestions?

  Have you tried:

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  What happens when you try to insert a disk? The player makes a noise?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• A single hard drive will not be shared on network. All other players share very well.

  A single hard drive will not be shared on network.  All other players share very well.  Don't have a homegroup installation because I also have XP machines.  The drive is on a windows machine 7.   I checked all the settings.  Of course, all the machines are on the same workgroup.  It's just 1 road.  The other 5 on this computer share very well.

  Hey Timmy,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, player does not network share.

  The problem may occur due to some network settings.

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps.

  Answer to us if you are experiencing problems with the sharing network or any Windows problem, and we would be happy to help you.

  Good day!

• A1103 new Ram and HARD drive will not start

  Hello.

  I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.

  When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.

  When I enter the Boot Manager I can see the following screen

  

  a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.

  Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.

  A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.

  In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.

  You cannot use a grey disc unless it was delivered with your specific Mac.  Native gray disc with Macs and can not e used on the other model of disc.

  You can probably call Apple and order a copy of the original disks

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• New HARD drive is not recognized on Tecra M1

  Hello

  I am new to this forum, so apologies if this is an old question.

  My Tecra M1 gave a quality service for the past 6 years, but recently, the Toshiba management console has put a message saying that the HARD drive will fail quickly.

  I loaded immediately turned off my main files before you remove the HARD drive. It is a Toshiba MK6022gax 60 gig IDE hard drive. I bought a new disc of gigabytes of 60 MK6022gax, but when I mounted this same I got the error message "error ide #0". Installation XP or the BIOS can see this new record.

  I then reassembled the old HARD drive, which started OK. I then mounted the new disk in a USB enclosure, initialized, partitioned and quick formatted using the XP disk management. He picked up OK. Then I copied some files to it and read them back with no problems, then the drive itself works very well. But when I plug as the main 'C' drive, I get the error message again and is not recognized by the bios or XP put in place.

  Clearly, there is some BIOS (?) or startup procedure I have to do to get this recognized record. Help!

  I have Tecra M1 long with 60 GB HARD drive. Right now, I've updated compatible HDD TOSHIBA HDD 2184 B.
  I can confirm that the HARD drive is recognized correctly and I actually have the new install of WXP Pro.

  In any case, have you tried to upgrade the BIOS to the default settings?
  As far as I know that nothing should be set before you put the new HARD drive and it must be recognized correctly.

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Pavilion p6610f Desktop Hard Drive will not be reset to zero when you restart

  HP Pavilion p6610f than Desktop PC Windows 7 Home Premium 64 bit HDD (I think) could not restart. There was no indication of a problem before me by clicking on the button restart. I have this sometimes just to clarify things, looks like things work better. When it restarted, it went to a screen with 2 choices 'launch start repair or load normally. I chose startup repair. He loaded some files & drivers but finally comes to the screen 'blue '. I tried to start the computer with all the 'F' keys, none worked, always came back to the blue screen. Tried to start the recovery discs I did, same thing. I started with the ERD that I did it. Same thing. Would not not even go to Safe Mode. Nothing. But, there is no prior problems. Nothing made me think that I should do something to deal with a disaster. Then a "friend of a friend" came and replaced the hard 'for free' drive and installed windows 8 (which I hate) and now the computer makes a ticking noise and a sound plaintive, as when there is a bad DVD in the drive, it work so now slow, freezes, takes internet forever and made so much noise I think it's going to explode. I think I should replace the hard drive with the "right" and then use my recovery disks. He said that windows 8 was just too big of an OS for the hard drive, it took, that is why it is slow. But couldn't I erase or reformat the hard disk, and then use my recovery disks. As it is, I have no HP software on the computer more.  Is there a way to get the data from my old hard drive? I'm willing to take the time to learn how to do all this by myself if I knew that this is possible and if it is useful? [edited font color and characters]

  Hello Ty965,

  I understand that you fell on some hard drive problems and a friend of a friend installed a former player for you and since he turned slowly and noisily. Personally, I recommend that you buy a new hard drive and then review and follow the instructions on the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through the recovery process and get your computer back operational.

  If you don't have the recovery discs for your computer you can buy them for a cheap price of HP Media software and the drivercommand.

  I hope that I have addressed the issue to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• The new hard drive will interfere with user passwords?

  I replaced my hard drive on my Dell Inspiron (Windows Vista Home Basics).  The new drive will interfere with my user passwords?

  Mona

  Hello

  You do not say what user passwords you talk, after replacing the hard drive which will be then require you to reinstall the operating system

  If you refer to the online user passwords (Facebook, Twitter, etc.), they will remain the same.

  If you are referring to your Vista account permissions to access, with a new hard drive and you reinstall the operating system, you will need to put in place all the user accounts and passwords user again for them.

  See you soon.

• (brand new) hard drive 0 not found (Latitude D600)

  ======================================================

  I know this has been discussed a lot, but I have not found a solution.

  My laptop is a Dell Latitude D600, BIOS Version: A16

  My HARD drive died last week, he was making noises that I made backups.

  Of course, one morning I turned it on and it says '... ". hard drive 0 not found... »

  So I thought right we'll buy a new one, no big deal. In this case.

  But to my horror, the brand-spanking-new HARD drive made me exactly the same thing!

  Costs of the antistatic packaging, directly in the cradle, with tenderness.

  "First hard drive 0 not found '.

  No bootable devices - strike F1 to retry boot, F2 for Setup utility.

  Also, the BIOS reads my "main hard drive: ' as 'None '.

  I tried: -.

  -Replace (re-attachment for cradle clamp, tighten, etc..)

  -reset of the BIOS (pressing ALT - F)

  -internal 'HDD' isolation in the "boot order" (BIOS)

  -startup WinXP CD to format (says also that it cannot detect a HARD drive)

  -stroked and tweaked every possible BIOS setting

  -a ran the diagnostics (well Yes, tells me that it cannot find a HARD disk)

  -check the temperature (not a problem at all)

  I bought my D600 to opportunity without boot floppies or manuals, and private security has passed.

  I'll try to take out the battery for a day to see if that will be "flash BIOS" but I can't help you as (to my knowledge) the motherboard settings remain stored with the help of a small battery attached to the actual motherboard that would be inside the envelope, so I think it's a misunderstanding in another post on the forum , but I'll try it in desperation anyway. Next step would be to open the envelope and checking the IDE and remove the battery from the motherboard for 5-10 minutes.

  After that, my only option is to send to some local business PC repair. Ick.

  Any help will be VERY appreciated! Thank you.