Compaq dx2250 recovery XP Pro SP2 cannot be updated to SP3 with IE6

Similar Questions

• Windows XP crashed so I rebooted emergency recovery disk and now cannot perform updates.

  Original title: Windows XP Media Edition crashed, I rebooted emergency recovery disk I need to download the updates how?

  How to load XP updates after the failure of the system?

  Hi MrDavidSosa,

  1 manages the Windows XP installation?

  2. are you facing problems with Windows Update?

  3. you receive an error message or error code?

  You can read the following article and check.

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Let us know if this information useful.

• Since Firefox v10. Layout, print preview and print do not seem to work with XP PRO SP2 x 64, but normally work with Win7 x 64.

  Layout, simply change line title to the foreground and freezes the screen except for the ability to close the page and return to the page where Page Setup was invoked. This print preview a gray monochrome page with the normal menu features that normally respond except the function of setting of the Page. Print prints a blank page still. Noticed problems with Firefox beta versions 10 and 11 and 12, with XP Pro SP2 x 64. Firefox version 11 has no such problems with Windows 7 ult x 64.

  Hello

  Please see this.

  Printing problems

• Error SP3 cannot be updated to SP3. The c:\windows\system32\comctl.dll file is open or in use by another application

  I am running windows xp sp2, and my system no longer recognizes my cd/dvd ROM. I tried using microsoft 'Fix It', but it says I need to run service pack 3. During the download of update I get error SP3, the file c:\windows\system32\comctl.dll is open or in use by another application. All the closed only apps.are execution update for sp3.   The cd/dvd ROM error says file in the registry is missing or corrupted. I'm stuck. Anyone know what I can do?
  Thanks, Rokcney

  Hi Rokcney,
   
  Follow the steps listed in the section "Let me fix it myself" in the following article to resolve the problem:
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Satellite A210-1BX: XP Pro SP2 cannot change the brightness of the display

  Hello

  I have a 1BX A210 and I installed XP Pro with Service Pack 2.
  I have almost all the drivers one moment I can't use the FN keys so I can't change my screen brightness and the battery life is less than 90 minutes.

  With Vista, the duration of battery life was less than 100 min.

  Is there another driver, I need?

  > I have almost all the drivers one moment I can t use the FN keys so
  I wonder where you found compatible and support the XP drivers for this laptop?

  I asked it because I ve a laptop computer A210 too which belongs to the series PSAELE like yours.

  I have collected unique different A210/A200 series XP drivers and especially all unknown devices disappeared from the Device Manager.
  But unfortunately I didn't find any compatible tool/utilities for this series :(

  But the fact is that Toshiba driver page does not have all the drivers XP and Toshiba Satellite A210 PSAELE tools.
  This is why you will not be able to control and use the keys FN under XP OS

  Sorry, but in my opinion there is not a lot to do

• (Surface Pro 2) Cannot perform updates

  I recently started my Surface Pro 2 for the first time in a while, and he started to be updated on what I guess was Windows 8.1. However, towards the end, updates failed and I have now the following message appears:

  We couldn't finish the updates

  To undo changes

  Do not turn off your computer

  There is no error code, and I guess I fell on the same question that most of the others seem to have had before. I can't do a boot image, my laptop runs windows 7, making it impossible for me to boot into recovery mode. And because I can't get to the desktop, I can't restart and refresh.

  I'd appreciate any help, I like the product and want to continue using it.

  Jordan

  Hi Jordan,.

  I understand how frustrating it can be when things do not work as expected.

  You can consult the following Microsoft article if you can't turn on the Surface Pro 2.

  Surface Surface Pro 2 and Pro: Windows does not start or stops responding

  http://www.Microsoft.com/surface/en-us/support/warranty-service-and-recovery/Windows-stops-responding-surface-Pro#Cantturn

  (Note: don't try the option refresh or Reset).

  Let us know the result. If the problem persists, we will be happy to help you.

• WGA fails installation WinXP Pro SP2 will not update additional

  Windows SP2 will not install updates and insists it takes to install WGA (although the WGA tool showed of Windows IS authentic).  I tried the FixIt tool, I tried to disable the anti-virus protection and it WGA is still not established.  No other updates will be installed because of this.

  Hello

  Try the standalone SP3 Installer. Download here...

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Tricky

• Cannot perform updates of Windows with 641 and 80070641 error codes

  Original title: update problems

  Get 641 and 80070641 errors every time I try to download updates.  How to solve this problem?

  Hi Bob,

  Please follow the links:

  Method 1:

  I suggest to ignore the title and follow the steps as indicated in the article.

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now, because this might have caused by viruses:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Re: Satellite Pro A120: cannot select an option on the recovery disk

  Hello

  I have a Toshiba Satellite Pro A120, which has recently been faced with the "alert: System protection failure! "password:" problem that it turned up on some BIOS password unknown on its own in the middle of normal operation.

  I got that fixed local Toshiba ASP.
  But now, when I was about to reinstall the Windows cos she had slow, the possibility that the recovery media normally give to just format the first partition become invalid.

  In the settings dialog box, the option is always there but it cannot be selected by clicking on it (from the color of the background showing this option not valid currently)... which means that the only selection (selected by default) is format all of the 38 GB... I don't want to do.

  Someone knows what is wrong and how can I solve this problem.

  I assume that you are using Windows XP and the restore CD also contains the XP operating system.
  It s also interesting if this option has worked in the past?  :|

  However, it s really mysterious that the solution cannot be executed and unfortunately I do not know why it happened

  In the worst case, you'll have to back up data from the HARD drive and format the whole HARD drive :(

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• Cannot install VC on Windows XP pro SP2 VM Chinese

  Hello

  The Chinese error message is "the type of processor cannot support this software.

  The host server installed on Dell R710 / Intel Xeon E5507

  Windows XP pro SP2 VM indicated 3 GB of ram and 2vcpu

  Thank you!

  leiw324, you see this after a windows update? I saw that right after an update of Internet explore, it is corrupt. If this is the case just remove and reinstall IE, go to start > run and enter this %windir%\ie7\spuninst\spuninst.exe

  Kind regards.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• My compaq presario has crashed and I lost everything, don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  Hello

  Thanks for posting the question in the Microsoft Community!

  You can't use the computer and reinstall the operating system.

  To help you better, we need more information.

  1. What do you mean by computer crashed? Do you get any error messages?

  2. is the computer, a laptop or desktop?

  If you use a laptop, you can contact the computer manufacturer to get an installation disc.

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Load the new XP Pro SP2 OS on Portege R200

  I have a R200, bought in Russia (where I work). I want to install an English version of XP Pro SP2.

  I intend to reformat and install from scratch. Then load all the utilities of Tosh from a CD, I created.

  Loading the XP CD and restart then the installation of Win XP Pro does not recognize Toshiba PCMCIA DVD Rom CD - RW I plugged.

  So I created the 6 boot disks for SP2 on the site of Ms.

  I start from the startup disk, all goes well but until I get to disk 6. Next, I get the windows error blue screen exception etc.

  Beyond that, I can't get to format the drive for a new installation.

  When start I have now the option for the Win XP Pro and WIn XP Russian, although the latter is going into the installation routine that cannot see a CD drive Yes F3 and restart.

  Any ideas?

  As far as I know that you need a support disk Toshiba (PCMCIA card 16-bit cardbus)
  I found an info that the readers should work:
  PA3402E-1DV2
  -PA3352E - 1 CD 2

  To my knowledge, you must press button P and it should be possible to start PCMCIA player. To boot from the disk, you must use the C key.

  Please check these messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6749&MessageID=23319

  In this announcement, you will find the compatible players to begin the process:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9291&MessageID=32612

  Please use the wonderful advanced search of this forum.
  Here you can search for similar comments that should help you.

• Reinstall windows xo pro sp2/sp3?

  Have a laptop with Windows XP Pro SP2 and it is 32-bit. I want to reinstall the OS, but I do not have the CD. How to do this? Where can I get the operating system? Can I download it from any source? Any link?

  Now the latest service pack for XP's SP3. So I can download SP3 from the windows website and install it in my pc. Is it free? At the bottom of my pc

  There is a sticker that shows the product key. But I think it's the product key of Windows XP SP2. I want to know that can I download XP SP3 and use this product key to reinstall the OS? Am I wrong?

  Please explain in detail what to do after I downloaded the OS? I want to download on another computer. How to make a CD so that I can install windows via a CD?

  Probably, your laptop has a depression recovery accessible by the F key or modified mechanism F (for example Ctrl) key at boot time. To learn more about this we need the details of your laptop (brand and model). You can find this documented somewhere in the start menu or in a booklet that came with the laptop.

  In addition, there are probably a facility to create your own recovery CD/DVDs. Again, look in the start menu and in any document paper. If this facility exists, you should do so as soon as possible because it's your only method of recovery in case of hard drive failure.

  Otherwise recovery integrated and/or the creation of recovery media, you will need to contact the manufacturer for recovery media.

  You can download a standalone SP3 Installer of...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  .. .This is only a service pack installation, not a full installer of XP operating system. You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC. You will not request a product key.

  Indeed you will need this installer of SP3 update of the OS until Windows Update will be operational. Install it before even to try Windows Update.

  Recovery of the manufacturer would not normally require the entry of the product key of your sticker. But if this is the case, the key on the sticker is good for recovery and updates including SP3.

  After recovery, you must uninstall any AV solution came pre-installed, do the SP3 upgrade without being connected to the internet and then install Microsoft Security Essentials for which a standalone installer can be downloaded here, for example...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  .. .or here...

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  Then you can connect to the internet and download MSE (or alternative AV) updates and Windows updates.

  A standalone IE8 installation program can be downloaded here...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43

  Tricky

• Product key not recognized during a repair of xp pro sp2 on a genuine xp pro sp2 disk. stuck on the main screen of the product.

  After starting problems on my Toshiba satellite with xp pro sp2, I booted my xp pro sp2 disk and did a repair instead of a reinstall software.  He went through the motions, removed the sys files, copied them back and so on.  Then he asked my product key and I typed in it and it does not recognize.  It's a real bought copy of xp pro sp2.  Now, I'm stuck on the main screen of the product.  When I start the laptop on the xp disk it blue screens, the only option I have is to enter a product key in the configuration...  I have my receipt for my xp pro disk and product key for certification sticker.  Help, please!

  "XP MCE Pro? That is not normal! It would be one or the other (AFAIK). Here is an example:

  http://cdn2.ioffer.com/IMG/item/811/353/46/o_XyuQav94U1MQ0Ci.jpg

  If the hybrid you mention is the real thing, it's new to me! I know that some have described as a superset of Pro MCE, but I never used this version, so I can't tell you definitively that a COA sticker wouldn't this combo of terms...

  In addition, the term 'Enterprise Edition' implies something not legitimate. I do not think that Microsoft has never used the term marketing for Windows.

  If you had a legitimate retail version of Windows XP (any version) that is not used on another PC, you can perform a Clean Install (not a repair installation), using this key (not the key COST laptop). The only way you can use the key from your laptop COST would be if you used the correct installation CD - a generic OEM version of the corresponding XP (MCE?) version. In this way, you can perform a clean installation or a repair installation.

  Have you looked at the links I posted? What do you mean by "boot option? The instructions were to press the zero key while turning on the laptop. You are not supposed to enter the OS! The recovery partition is quite distinct.

  If your laptop does not a recovery partition, you should be able to get the correct recovery CD for this Toshiba - by Toshiba or you might need to find a reputable eBay merchant, etc.. Restoredisks.com, who has a good rating from Better Business Bureau, they probably sold too.