Compaq Presario CQ5300UK Graphics Upgrade

Similar Questions

• the Compaq Presario CQ3074L graphics card upgrade

  Hello

  I was planning on upgrading my graphics card is ATI Radeon HD 4350 for purposes of games.

  the problem is that I don't know what superior graphics card should I buy that will be compatible with the motherboard, processor and memory Compaq Presario CQ3074L screening.

  I was hoping that if anyone could advice me chart compatible cards.

  Thank you.

  \(^.^)/

  You can go for a VGA card exceeding not power consumption 75 w which is the limitation of PCIe slot. I also recommend the upgrade of power. If the VGA up to 75w (like nVidia GF530 or 540) I would like to go at least 300W PSU and more than 400W or more would be appropriate. Maps on 75W have connector 6 extra pins to provide a separate power to the VGA card.

• Compaq Presario C700: Compaq Presario C700 maximum upgrades. CPU/SODIMM

  Hello

  Please answer suite

  1. how to get the maximum for components upgrades

  CPU / SODIMM given the configuration of the model Compaq Presario C797EE mentioned at the end.

  2. Why is there BIOS ver F.35 for Presario C700 when later offered is the worm F.34 bios on HP web. What is the difference. Where can I find both to be uploaded with the release notes. New BIOS on model C797EE allows processors support Intel Core 2 Duo X 9000 and PC6400 SODIMM for 8 GB?

  3. There is evidence of success update here. Only difference is its Compaq Presario C797EE but C771US not and was able to upgrade CPU Core 2 Duo T9300. Is it possible to upgrade series C700 (C797EE) to Intel C2d Extreme X 9000 processor. If this is not the case, what is the max for the chip set used in C797EE.

  4 NT are different for Intel T9300 and others by 35W 44W or any other factor, will they perform the upgrade, if yes then please provide last possible list compatible CPU my current chip-set

  Comparative analysis of the applications here are showing different results. Please see Sandra chipset readings compare to the results of CPU - Z.

  I will be grateful

  Thank you.

  Current configuration of the system:

  identified by different applications

  CPU - Z:

  Chipset: Mobile Intel (r) 965 Express Chipset Family

  CPU: Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz

  Socket P (478)

  Memory: DDR2

  Format of SO-DIMM

  Size 2048 MB

  Bandwidth Max PC2-5300 (333 MHz)

  DMI BIOS

  vendor Hewlett-Packard

  Hello, just let everyone know that my upgrade worked.

  -Processor

  Updated for intel T9300 as reference. probably could support the x 9000, but it was much more expensive is not a value

  -Memory:

  I was skeptical with past more than 4 GB, however, currently functioning 6 GB (2 X 4). foung are not accidents of errors due to modules. Works perfectly.

  . After these updates, I installed small SSD, which added to the startup that gave more boost to the system.

  . Replaced the DVD with Caddy drive through visruth, installed with 1 TB

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dimension-of-DVD-CD-used-in-Compaq-Presario-C700/m-p/4926179

  . Replaced with 12 cells battery

  Conclusion:

  This unit of 8 years demonstrated startup, transformation and loading speeds that could be compared to couple of old machines, 6 GB working memory space that can accommodate witout heavy programs using the file (actually disabled) Exchange and on the storage of Tera bytes to store every necessary thing making the year becomes mordern General phone use. Only thing that is not dealing with it is the graphics card. Besides that all is well, infact it runs more more fees than before.

  Thanks for your advice

• Compaq Presario SR5518F graphics card drivers

  I'll be upgrading the graphics card on my Compaq Presario SR5518F (already made sure the card I got was compatiable).

  Before I come and do something for the card, I have to ask you a few questions.

  1.) should I uninstall the graphics card drivers

  2.) should I uninstall the card in general

  (3.) when I get the graphics card installed, is it safe to install the drivers in safe mode or normal mode?

  Thanks for the help!

  Hello:

  Yes, before you install the new video card, you should go to Device Manager, click to expand the display of the maps, right-click in the graphics section and select uninstall.

  Depending on the operating system that you are running, if there is a driver uninstall box to check, check this box.

  Instead of restarting the PC, simply close it down, unplug it, install your new video card and you should be all set, and as Eric posted, you install the new drivers in Windows 'normal' mode

  If you lose your integrated audio system (you can according to the model) If your new video card has an HDMI output port, you will need to go into BIOS, find the onboard audio setting.

  It will be either automatic or off value.

  Change the setting to "Enabled". Save the setting it by hitting the F10 key and again when you go out.

  After reboot and return to windows, you should have the on-board audio back.

• The Rams - EE of Compaq Presario CQ60-116 upgrade

  Hello

  This is my first post so I think I erased my point of view, which may not be 100% good.

  In any case, short story...

  I have a Compaq Presario CQ60 - 116 EA
  http://support.HP.com/us-en/document/c00820047
  
  and I would like to upgrade of his memory, I know that it can take up to 4 GB, but I'm not sure of the maximum speed of memory the motherboard can take and use fully without being too high speed. (for example, I won't buy a 1333 MHz Rams beacause I know that it is more than enough and that it is a waste of money)
  
  I am confused between buying a 667 MHz or a 800 MHz. So, could someone give me a hand here please
  
  Thanks in advance...

  Hello:

  You want to buy 2 x 2 GB of PC2-6400 memory for the processor T5800 in your notebook.

  Memory running at 800 MHz

  http://Ark.Intel.com/products/35581/Intel-Core2-Duo-processor-T5800-2m-cache-2_00-GHz-800-MHz-FSB?q=T5800

• Compaq Presario SR5414UK Graphics Card + PSU

  Hello

  I have a Compaq Presario SR5414UK now and you want to add a nVidia Geforce 8800GTS which me curreently running on the integrated graphics card. To do this, I apparently up to my diet because I have 300 watts and need from 400 to run this card. The 500W model it would be sufficient to run the card and in addition to my PC?

  http://www.Maplin.co.UK/module.aspx?moduleno=221195

  If this is not the case, I need to run this card that would fit in my current PC.

  Thanks in advance.

  P.s. Please note I live in England and therefore need a place that is delivered to, preferably with the lowest possible cost if shipping overseas is inevitable.

  Message edited by Wolvorn on 01/31/2009 07:17
  Message edited by Wolvorn on 01/31/2009 07:20

  Yes, 500 watts would do very well.

  Sean

  HP employee

• Compaq presario CQ42: Compaq presario CQ42 HDD Upgrade

  Hello!

  A good and nice day to all!

  I just want to know if it is possible to upgrade my computer laptop (HP Compaq Presario CQ42) drive HARD internal 320 GB (current) upwards up to 1 TB of HARD drive?

  Share:

  My HARD drive right now is having a problem. I have it parted to partition 2 and it worked for me for a couple of years now. But lately this week, I removed the HDD to be used with an external box to copy some files from my desktop and installed as soon as it is. Unfortunately, when I try to start my laptop, it starts only until windows 8 Logo appears then flashing the screen off a second and turns to a black screen (similar to the background at boot)...

  When I put my camera and connect with my desktop, C drive is not recognized more... He sometimes say that I format the drive and there is sometimes no drive at all. While my D drive and his reserved system are present and accessible...

  I tried to recover the drive using HDD regenerator, but he says that the disc is fine.

  I also tried TestDisk but still no good result...

  With what I shared, may be you have some idea of what happened so I would like to know about it...

  My real question is how much HARD disk capacity can be improved? I intend to install a 1 TB if posible...

  Best regards and thanks a lot for any response...

  #IloveHP

  Not a good idea to remove a hard drive from a work computer and then attach it to another computer. Permissions can get screwed to the top of this way. If you want to transfer files off the drive just do it on a computer network. But to really tell if the hard drive is to have software or hardware issues you just need to launch the diagnostic hard drive in the BIOS of the laptop. And your question on the 1 TB drive is easy: no problem. You can install a 9.5 mm thickness 2.5 inch wide SATA 1 TB hard drive. They are actually 1.5 TB abd even now, drives of 2 TB and those would be too much work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ57-104TU: upgrade Ram, memory (Ram Hynix PC3L-12800)

  Hello world

  I have a Compaq Presario CQ57-104TU. I recently decided to upgrade the ram (currently 1 x 2 GB Elpida PC3 - 10600 1333 Mhz). I bought 2 x 4 Gb Hynix HMT451S6AFR8A, PC3L-12800. Unfortunitely when I install the new Ram (Hynix)

  the computer does not start. Is there something I can do or the Ram is not compatible?

  Any help would be appreciated,

  André

  Here is the Service Manual:

  Manual

  See p.2. Specified memory is DDR3-1333 1.5 volt and you try to install low-voltage DDR3-1600. In addition, memory that you are trying to install is high density, because it has 4 blocks on each side, where I am betting that original memory was of low density (8 blocks). Long story short, it is not compatible. It do you no good to install DDR3-1600 by the way. Best of cases, it will anyway be downclock speed 1333.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ61-416SA: upgrade the Compaq CQ61 wireless card

  I have a Compaq Presario CQ61-416SA, running 64-bit Windows 7 application. The current wireless card only works on the 2.4 Ghz band and I want to upgrade to a dual band to get the best speed etc. to 5 GHz. I have an Intel Centrino N6230 of replacement card, but the phone will not accept anything other than the default map. At the start, it stops with an error message saying that it will not continue unless the "unauthorized device" is deleted. If I re - install the original wireless card, it starts and works very well, but this is not the point, I would like to update.

  I guess that the default is to lock the part of the BIOS of the laptop to prevent alteration unauthorized with laptop computers under warranty, but mine is well outside the guarantee.

  I know that the card works because I installed it in my laptop previous and I have been in electronics for 30 years and spent about 5 years of this repair of computers laptops, desktops, servers, etc so I'm sure that I am able to connect a card and the driver installation!

  There does anyone know a way around the block? I won't to be able to upgrade the laptop without it.

  Anyone?

  Do not completely blame HP, but it was little 1984 involving your federal Government. HP and Lenovo read a few Federal Communications Comm regs on the recording of radio portable wireless (including the computer wifi cards) to require that alternative cards are blocked. Other laptop makers has not agreed and now the 'white list' is history, but there is no effort to go back and make new BIOS for older models.

  HP wireless card versions have specific identification in the firmware looking for the HP whitelist before clearing the map to use if you use the version of HP. I looked pretty hard for a version of HP of the card and the one I linked is everything I could find. Google around and you can do better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Presario CQ61 320EX: HP Compaq Presario CQ61 graphic card upgrade

  Hello

  I was wondering anyone can help me with this problem.

  I want to upgrade graphics on my laptop, and I don't know is this possible, and that the graphics card is copmpatible with this model.

  Current map is the graphics card ATI Mobility Radeon HD 4330, and I would like to install max taken in charge by the motherboard.

  Also, the CPU is 2.2 GHz AMD Turion II Dual - Core Mobile Processor M500, is possible to install

  M600, processor 2. 4 GHz, 2 MB L2 cache, 3.6 GT/s HyperTransport speed or some even faster.

  Thank you very much for your help!

  Good news/bad news. No upgrade to the video is possible but the M600 CPU will work.

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP compaq presario cq5300uk: update of hp compaq presario cq53

  Hello

  I'm looking to upgrade my desktop pc.

  What I expect:

  -Amd phenom iix4 965 black edition

  R7 - Msi I thnik he need to 500watts

  Maby - a new PSU, my only account 230watts

  Please can you tell me if I can adapt these elements as well as any recommendation if not.

  Thank you

  Note: Im paartly new to building computers had the experience to change the ram, gpu and hard drvies.

  Thank you!

  Black editions are generally not compatible HP.  The last series of compatible graphics cards was the GTX 660-670.  Your system is unable to use most up-to-date maps of UEFI, as the R7.  Discoverhybrid cardsby MSI.  (without guarantee)

• Compaq presario v5000 V5308CA: compaq presario v5000 graphics driver

  I'm looking for a video driver for w7 or later

  Thank you

  Hello:

  You can manually install the graphics driver Vista support page for your laptop as follows...

  Download and run the driver below.  You will probably get an error not supported operating system.  Conclusion of any windows error.

  This package contains the driver for the ATI Mobility Radeon Xpress 200 Series video in laptops models and operating systems.
  
  This driver allows the ATI Mobility Radeon Xpress 200 series video display function and provides an interface for adjusting the resolution and display various properties.

  File name: sp35203.exe

  Go to Device Manager and click to expand the category of cards display device and click on the VGA Standard map (or there may be a separate device listed as a video controller in the category other devices).

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp35203.

  Make sure that the include subfolders is selected, and the driver should install.

  Then restart the PC and graphics need to be working very well.

• Compaq Presario CQ61: After upgrade to Windows 10, HDMI does not WMV (.wmv) files more.

  Hello

  When I connect my PC to my TV, movies created with Movie Maker cannot take more since I've upgraded to Windows 10.  My system is completely up to date.  Without HDMI, there is no problem.

  What can I please?

  Thanks in advance.

  Hello @PaulTLX,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the HDMI issue and wanted to help you!

  The problem may be the driver.  For your product, all Windows 10 drivers are pushed through Windows Update.  You can try to check for drivers that will work with Windows 10.  You can see this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Compaq Presario CQ57-339WM upgrade CPU for Intel Core i3 2310 M?

  Can I upgrade the processor? : http://ark.intel.com/products/52220/Intel-Core-i3-2310M-Processor-3M-Cache-2_10-GHz

  He was given to me by the guardian after that I asked them if they had an available 988 PGA processors

  Hello:

  Here is the link to the service manual for your laptop. Chapter 1 lists the supported processors.

  http://h10032.www1.HP.com/CTG/manual/c02948186.PDF

  Processor Intel Core i3 2310M is not supported, but the 2330 m.

  The Celeron processor you have runs on the chipset Mobile Intel 6 series as either i3.

  http://Ark.Intel.com/products/59570/Intel-Celeron-processor-B800-2m-cache-1_50-GHz

  By the book, I must tell you that it won't work.

  So, you can try to install at your own risk. It may work correctly, or it may not work at all.

  It all depends on if the BIOS has the microcode for the i3-2310 and other firmware supported processor.

• Compaq Presario CQ5110F: Compaq Presario CQ5110F support upgrade

  Hello, this is my first rack and a little blend

  Here, the factory plug of the pc:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en...

  Can someone give a good configuration.
  Am looking for graphics card that is equal to or less than lil: GeForce GTS 450
  and a cpu is AMD Phenom II Quad-Core but less than $100 if possible or it may be slightly lower or equal: Athlon II X 3 425 
  I know that ill probably have to change the power supply factory so can you provide me with one.
  If I missed something please let me know

  Really appreciate it!

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a class business PC.