Compaq Presario CQ5110F: Compaq Presario CQ5110F support upgrade

Similar Questions

• Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

  Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

  I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

  I also tried to use the Sony system recovery CD, but it does not work.

  Help!

  Hi IAMSOBZ,

  As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

  Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

  a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

   

  Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

  c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

  d. read the Microsoft software license agreement and press F8.

  e. Setup will scan for previous Windows installations

  f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

  g. complete the installation

  You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• Could not open install Assistant.  I get this error message: cannot install the application due to a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not

  How do I download a trial of 12 items, Adobe?

  I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the author of the application.

  Hi alposer,

  Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.

  Kind regards

  Rave

• Compaq Presario C700: Compaq Presario C700 maximum upgrades. CPU/SODIMM

  Hello

  Please answer suite

  1. how to get the maximum for components upgrades

  CPU / SODIMM given the configuration of the model Compaq Presario C797EE mentioned at the end.

  2. Why is there BIOS ver F.35 for Presario C700 when later offered is the worm F.34 bios on HP web. What is the difference. Where can I find both to be uploaded with the release notes. New BIOS on model C797EE allows processors support Intel Core 2 Duo X 9000 and PC6400 SODIMM for 8 GB?

  3. There is evidence of success update here. Only difference is its Compaq Presario C797EE but C771US not and was able to upgrade CPU Core 2 Duo T9300. Is it possible to upgrade series C700 (C797EE) to Intel C2d Extreme X 9000 processor. If this is not the case, what is the max for the chip set used in C797EE.

  4 NT are different for Intel T9300 and others by 35W 44W or any other factor, will they perform the upgrade, if yes then please provide last possible list compatible CPU my current chip-set

  Comparative analysis of the applications here are showing different results. Please see Sandra chipset readings compare to the results of CPU - Z.

  I will be grateful

  Thank you.

  Current configuration of the system:

  identified by different applications

  CPU - Z:

  Chipset: Mobile Intel (r) 965 Express Chipset Family

  CPU: Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz

  Socket P (478)

  Memory: DDR2

  Format of SO-DIMM

  Size 2048 MB

  Bandwidth Max PC2-5300 (333 MHz)

  DMI BIOS

  vendor Hewlett-Packard

  Hello, just let everyone know that my upgrade worked.

  -Processor

  Updated for intel T9300 as reference. probably could support the x 9000, but it was much more expensive is not a value

  -Memory:

  I was skeptical with past more than 4 GB, however, currently functioning 6 GB (2 X 4). foung are not accidents of errors due to modules. Works perfectly.

  . After these updates, I installed small SSD, which added to the startup that gave more boost to the system.

  . Replaced the DVD with Caddy drive through visruth, installed with 1 TB

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dimension-of-DVD-CD-used-in-Compaq-Presario-C700/m-p/4926179

  . Replaced with 12 cells battery

  Conclusion:

  This unit of 8 years demonstrated startup, transformation and loading speeds that could be compared to couple of old machines, 6 GB working memory space that can accommodate witout heavy programs using the file (actually disabled) Exchange and on the storage of Tera bytes to store every necessary thing making the year becomes mordern General phone use. Only thing that is not dealing with it is the graphics card. Besides that all is well, infact it runs more more fees than before.

  Thanks for your advice

• The Rams - EE of Compaq Presario CQ60-116 upgrade

  Hello

  This is my first post so I think I erased my point of view, which may not be 100% good.

  In any case, short story...

  I have a Compaq Presario CQ60 - 116 EA
  http://support.HP.com/us-en/document/c00820047
  
  and I would like to upgrade of his memory, I know that it can take up to 4 GB, but I'm not sure of the maximum speed of memory the motherboard can take and use fully without being too high speed. (for example, I won't buy a 1333 MHz Rams beacause I know that it is more than enough and that it is a waste of money)
  
  I am confused between buying a 667 MHz or a 800 MHz. So, could someone give me a hand here please
  
  Thanks in advance...

  Hello:

  You want to buy 2 x 2 GB of PC2-6400 memory for the processor T5800 in your notebook.

  Memory running at 800 MHz

  http://Ark.Intel.com/products/35581/Intel-Core2-Duo-processor-T5800-2m-cache-2_00-GHz-800-MHz-FSB?q=T5800

• Presario sg-3320il: upgrade of RAM Compaq presario sg-3320IL

  Hello

  My office - compaq presario sg3320il originally supplied with 1 GB ddr2 RAM (2 x 512 MB sticks). I bought a 2 GB Transcend DDR2 800 Mhz RAM stick (model number: JM800QLU - 2G). It worked perfectly when I removed the old sticks pre-installed and added this new RAM stick only (IE, with a total of 2 GB of memory). I bought another stick of 2 GB of RAM - same brand, same frequency, same model number too and now when that is added with the older 2 GB of RAM, it does not work properly. Some weird appears on the start screen for half the time and sometimes when I restart the system, he gets up to system boot and then hangs or restarts.

  The two 2 GB RAM when used only work perfectly. Product specifications are here as well as the news of upgrade memory - http://support.hp.com/us-en/product/Compaq-Presario-SG3320IL-Desktop-PC/3697170/model/3707607/docume...

  Help, please

  Hello again @kau_shik_51094,

  In the case of 2 RAM sticks not even work together, I suspect that the slot on your motherboard is damaged.

  Really, there may be another explanation that your computer works with both sticks independently of each other, but not together and since they are the exact same it leaves only the motherboard as the problem.

  I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

• Compaq presario CQ42: Compaq presario CQ42 HDD Upgrade

  Hello!

  A good and nice day to all!

  I just want to know if it is possible to upgrade my computer laptop (HP Compaq Presario CQ42) drive HARD internal 320 GB (current) upwards up to 1 TB of HARD drive?

  Share:

  My HARD drive right now is having a problem. I have it parted to partition 2 and it worked for me for a couple of years now. But lately this week, I removed the HDD to be used with an external box to copy some files from my desktop and installed as soon as it is. Unfortunately, when I try to start my laptop, it starts only until windows 8 Logo appears then flashing the screen off a second and turns to a black screen (similar to the background at boot)...

  When I put my camera and connect with my desktop, C drive is not recognized more... He sometimes say that I format the drive and there is sometimes no drive at all. While my D drive and his reserved system are present and accessible...

  I tried to recover the drive using HDD regenerator, but he says that the disc is fine.

  I also tried TestDisk but still no good result...

  With what I shared, may be you have some idea of what happened so I would like to know about it...

  My real question is how much HARD disk capacity can be improved? I intend to install a 1 TB if posible...

  Best regards and thanks a lot for any response...

  #IloveHP

  Not a good idea to remove a hard drive from a work computer and then attach it to another computer. Permissions can get screwed to the top of this way. If you want to transfer files off the drive just do it on a computer network. But to really tell if the hard drive is to have software or hardware issues you just need to launch the diagnostic hard drive in the BIOS of the laptop. And your question on the 1 TB drive is easy: no problem. You can install a 9.5 mm thickness 2.5 inch wide SATA 1 TB hard drive. They are actually 1.5 TB abd even now, drives of 2 TB and those would be too much work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ57-104TU: upgrade Ram, memory (Ram Hynix PC3L-12800)

  Hello world

  I have a Compaq Presario CQ57-104TU. I recently decided to upgrade the ram (currently 1 x 2 GB Elpida PC3 - 10600 1333 Mhz). I bought 2 x 4 Gb Hynix HMT451S6AFR8A, PC3L-12800. Unfortunitely when I install the new Ram (Hynix)

  the computer does not start. Is there something I can do or the Ram is not compatible?

  Any help would be appreciated,

  André

  Here is the Service Manual:

  Manual

  See p.2. Specified memory is DDR3-1333 1.5 volt and you try to install low-voltage DDR3-1600. In addition, memory that you are trying to install is high density, because it has 4 blocks on each side, where I am betting that original memory was of low density (8 blocks). Long story short, it is not compatible. It do you no good to install DDR3-1600 by the way. Best of cases, it will anyway be downclock speed 1333.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ61-416SA: upgrade the Compaq CQ61 wireless card

  I have a Compaq Presario CQ61-416SA, running 64-bit Windows 7 application. The current wireless card only works on the 2.4 Ghz band and I want to upgrade to a dual band to get the best speed etc. to 5 GHz. I have an Intel Centrino N6230 of replacement card, but the phone will not accept anything other than the default map. At the start, it stops with an error message saying that it will not continue unless the "unauthorized device" is deleted. If I re - install the original wireless card, it starts and works very well, but this is not the point, I would like to update.

  I guess that the default is to lock the part of the BIOS of the laptop to prevent alteration unauthorized with laptop computers under warranty, but mine is well outside the guarantee.

  I know that the card works because I installed it in my laptop previous and I have been in electronics for 30 years and spent about 5 years of this repair of computers laptops, desktops, servers, etc so I'm sure that I am able to connect a card and the driver installation!

  There does anyone know a way around the block? I won't to be able to upgrade the laptop without it.

  Anyone?

  Do not completely blame HP, but it was little 1984 involving your federal Government. HP and Lenovo read a few Federal Communications Comm regs on the recording of radio portable wireless (including the computer wifi cards) to require that alternative cards are blocked. Other laptop makers has not agreed and now the 'white list' is history, but there is no effort to go back and make new BIOS for older models.

  HP wireless card versions have specific identification in the firmware looking for the HP whitelist before clearing the map to use if you use the version of HP. I looked pretty hard for a version of HP of the card and the one I linked is everything I could find. Google around and you can do better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ5300UK Graphics Upgrade

  Hello, I have a Compaq Presario CQ5300UK and I plan on upgrading to a 1 GB graphics card. This card would fit into my PC?

  www.PCWorld.co.uk/gbuk/PNY-NVIDIA-GeForce-gt-430-PCI-e-Graphics-Card-1gb-08623397-PDT.html?intcmpid=...

  Thank you

  Hello:

  You should be fine with this card as it meets the specifications of your P/S and has the x 16 PCIe form factor.

  I also like that it is a nVidia card, which should play nicely with your card chipset mother nVidia.

  Because it has a HDMI port, it can disable your integrated sound card when you install it.

  Be not dismayed.

  Simply go into your BIOS, search for the audio setting on board. Change auto to "Enabled". Save the setting here and when you exit the BIOS.

  Then you'll once again on board sound and audio HDMI when you connect a TV to your PC with a HDMI cable.

  Paul

• laptop Compaq presario V4118AP - support of DDR2 RAM

  Hello

  According to manual delivered Hardware and Software Guide Compaq Notebook Series Document part number: 375422-001,

  "Each memory module housing notebook supports a 256 MB, 512 MB, 1024 MB or 2048 MB DDR2 SODIMM memory module".

  According to software Lavalys EVEREST, supported types of memory: DDR-333 SDRAM, DDR2-400 SDRAM, DDR2-533 SDRAM.

  Just want to check if it supports DDR2 RAM? If so do I use 800 MHz modules?

  Currently I have 512 x 512 166 MHz DDR SDRAM occupying two slots; Please advise on this upgrade.

  Also, this upgrade 800 MHz DDR2 have a performance improvement?

  Thank you

  Cedric

  Hello

  nirav401 wrote:

  Now I'm confused!

  Just contacted HP email support form, got response (identification of the accident =9751849) as my computer laptop supports DDR2 RAM with max 4 GB (2 GB / slot)

  Any comment?

  Thank you

  Cedric

  Sure! The support agent has confirmed what I had read.

  If your laptop has the installed memory modules. DDR2 more images of modules soDimm DDR2

  

  and you try to put these. DDR3 soDIMM slots in more images of the soDimm DDR3 modules

  

  I believe that a picture is worth a thousand words in this case.

  Best regards
  ERICO
  

• Compaq Presario CQ57-339WM upgrade CPU for Intel Core i3 2310 M?

  Can I upgrade the processor? : http://ark.intel.com/products/52220/Intel-Core-i3-2310M-Processor-3M-Cache-2_10-GHz

  He was given to me by the guardian after that I asked them if they had an available 988 PGA processors

  Hello:

  Here is the link to the service manual for your laptop. Chapter 1 lists the supported processors.

  http://h10032.www1.HP.com/CTG/manual/c02948186.PDF

  Processor Intel Core i3 2310M is not supported, but the 2330 m.

  The Celeron processor you have runs on the chipset Mobile Intel 6 series as either i3.

  http://Ark.Intel.com/products/59570/Intel-Celeron-processor-B800-2m-cache-1_50-GHz

  By the book, I must tell you that it won't work.

  So, you can try to install at your own risk. It may work correctly, or it may not work at all.

  It all depends on if the BIOS has the microcode for the i3-2310 and other firmware supported processor.

• Compaq Presario CQ61-105ED: upgrading my processor CQ61-105ED

  Can I put my CQ61-105ED processor Intel® Celeron® Processor 900
  (2.20 GHz, 800 MHz FSB, 1 MB Cache) T2390 processor Intel® Pentium®
  (1.86 GHz, 533 MHz FSB, 1 MB Cache) wondering if compatimble for my card mother HP model 3069 and my bios version is HP F.23

  Here is the Service Manual:

  Manual link

  The T2390 isn't on the list of the processors. See Page 1-1. Also, I don't understand the purpose. Performance of two processors is almost identical:

  http://cpuboss.com/CPUs/Intel-Pentium-T2390-vs-Intel-Celeron-900

  The only thing I could see is that you want two hearts. The T3400 is supported and would be a much more sensitive level.

  http://www.CPU-world.com/compare/451/Intel_Mobile_Celeron_900_vs_Intel_Pentium_Dual-Core_Mobile_T3400.html

  T3400 $3 on eBay

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ61: After upgrade to Windows 10, HDMI does not WMV (.wmv) files more.

  Hello

  When I connect my PC to my TV, movies created with Movie Maker cannot take more since I've upgraded to Windows 10.  My system is completely up to date.  Without HDMI, there is no problem.

  What can I please?

  Thanks in advance.

  Hello @PaulTLX,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the HDMI issue and wanted to help you!

  The problem may be the driver.  For your product, all Windows 10 drivers are pushed through Windows Update.  You can try to check for drivers that will work with Windows 10.  You can see this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!