Compaq Presario SR5518F graphics card drivers

Similar Questions

• Compaq Presario SR5414UK Graphics Card + PSU

  Hello

  I have a Compaq Presario SR5414UK now and you want to add a nVidia Geforce 8800GTS which me curreently running on the integrated graphics card. To do this, I apparently up to my diet because I have 300 watts and need from 400 to run this card. The 500W model it would be sufficient to run the card and in addition to my PC?

  http://www.Maplin.co.UK/module.aspx?moduleno=221195

  If this is not the case, I need to run this card that would fit in my current PC.

  Thanks in advance.

  P.s. Please note I live in England and therefore need a place that is delivered to, preferably with the lowest possible cost if shipping overseas is inevitable.

  Message edited by Wolvorn on 01/31/2009 07:17
  Message edited by Wolvorn on 01/31/2009 07:20

  Yes, 500 watts would do very well.

  Sean

  HP employee

• the Compaq Presario CQ3074L graphics card upgrade

  Hello

  I was planning on upgrading my graphics card is ATI Radeon HD 4350 for purposes of games.

  the problem is that I don't know what superior graphics card should I buy that will be compatible with the motherboard, processor and memory Compaq Presario CQ3074L screening.

  I was hoping that if anyone could advice me chart compatible cards.

  Thank you.

  \(^.^)/

  You can go for a VGA card exceeding not power consumption 75 w which is the limitation of PCIe slot. I also recommend the upgrade of power. If the VGA up to 75w (like nVidia GF530 or 540) I would like to go at least 300W PSU and more than 400W or more would be appropriate. Maps on 75W have connector 6 extra pins to provide a separate power to the VGA card.

• Presario CQ61 320EX: HP Compaq Presario CQ61 graphic card upgrade

  Hello

  I was wondering anyone can help me with this problem.

  I want to upgrade graphics on my laptop, and I don't know is this possible, and that the graphics card is copmpatible with this model.

  Current map is the graphics card ATI Mobility Radeon HD 4330, and I would like to install max taken in charge by the motherboard.

  Also, the CPU is 2.2 GHz AMD Turion II Dual - Core Mobile Processor M500, is possible to install

  M600, processor 2. 4 GHz, 2 MB L2 cache, 3.6 GT/s HyperTransport speed or some even faster.

  Thank you very much for your help!

  Good news/bad news. No upgrade to the video is possible but the M600 CPU will work.

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq presario sr5518f sound card

  Anyone know if this machine may have an installed all external sound card? I know that the stock is not integrated, but a friend of mine has one and its sound went kaput, no sound at all card detection.

  Hello

  The following lisk shows the specifications of the machine of your friend:

  http://support.HP.com/us-en/document/c01475192

  It has:

  • Expansion slots:

• Compaq presario sr5518f upgrade processors

  First of all, I apologize if I do not write in the correct section.  A little new here.

  in any case, I'm going to completely overhaul my Compaq Presario SR5518F.  I'll get a new graphic/video card, power supply, and processor.

  Speaking of the processor, I have a question for someone who would know the upgrade of processors.

  The specs of my PC (which can be accessed HERE) said I can move to an Intel Core 2 Duo E7xxx.  I'm looking at upgrading to an Intel Core 2 Duo E7400 processor which has close to 3.0 Ghz (2.8 to be precise) of the operating speed.

  The question I have, is the Intel Core 2 Duo processor E7400 compatiable for my Compaq Presario computer motherboard?  I have never replaced or upgraded forever, and so I want to make sure I'm making the right decisions when buying upgrades.
  
  I would appreciate your help or you guys could give me advice.   Thank you and have a nice!

  Hello

  As you can see from the following link:

  http://support.HP.com/us-en/document/c01386897

  It supports Core 2 Duo E7xxx (Wolfdale-M) CPU means that it will support CPU E7400 but you must update the BIOS to make sure.

  Kind regards.

• Compaq Presario SR5518F last updated BIOS

  I have a Compaq Presario SR5518F PC desktop computer.  I plan on upgrading the processor Intel Pentium E up to an Intel Core 2 Duo processor.  I was told before in another thread on the compatibility of processor I need to download the latest update of the BIOS.  I downloaded the update to the BIOS shown on computer SR5518F driver downloads page, but what I want to know is, are there additional updates in addition to that found in the page/downloads of drivers for my S55518F computer?
  
  Any help would be appreciated.  Thank you!

  Yes, that's correct.

• Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?

  Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers?

  Concerning the best and warm
  Adrian Wainer

  Hello

  All Toshiba drivers for European notebook series can be found on the European driver Toshiba page:

  You can find it here:
  http://EU.computers.Toshiba-Europe.com-> support Download Center &-> Download drivers

  You will find all the latest drivers published by Toshiba

• Updated by Satellite L500D - 16L graphic card drivers

  I'm playing Harry Potter 1-4 on my laptop, but it has not installed properly and bugs in scene 1. I contacted manufacturers of games on this subject and they told me to update my graphics card drivers but I can't find where they are on this site. Does anyone know how and where I can update the drivers?

  Hi mate

  All Toshiba drivers can be found on the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com
  Satellite L500D - 16L belongs to the series of PSLT9E.
  You can choose this in order to get all the drivers for the laptop.

  But in many cases the driver versions are not similar to the latest versions available on the pages of graphics card manufacturer.
  To the point that the Toshiba drivers are modified and released the mobile use FRO drivers ATI/NVidia don't support overheating protection that helps to control the temperature of the GPU.

  The use of these drivers is therefore always at you own risk

• Satellite M70-147: graphics card drivers required

  Anyone have any idea when they will release the new drivers because I already have problems with some games because I have old drivers and even Ati mobility drivers does not work because I sort out equipment protection system on my laptop.

  And Yes, I already posted another topic like this, but I can not connect nomore on my old account so I had to create a new.

  Thank you

  Hello

  The fact is that Toshiba to recommend to use the Toshiba graphics card drivers because this driver has an overheating protection. These drivers one specially designed for the use of the laptop and it s not recommended to use any other rivers that are designed for desktop use.

  If you use other drivers, you can do so at you own risk!

• How to upgrade the graphics card drivers sony vaio laptop computer vpceb45fg Windows 7 home premium 64-bit?

  How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?

  Hi simran1976,

  Use the link below to download and install the video drivers:

  http://www.Sony.co.in/support/product/VPCEB45FG#

  http://www.Sony.co.in/support/product/VPCEB45FG#

  If my post answered your question, please mark it as an "accepted Solution".

• nVIDIA GeForce Fx 5500 256 MB AGP Graphics Card Drivers for Windows 8 Pro 32-Bit

  Hi!, I have motherboard ECS P4M800Pro M2 Ver2.0, 2.2 GHz E4500 processor Intel Core2DUO, DDR2 533 MHz 2 GB RAM hardware with WINDOWS 8 32 Bit operating system. The motherboard has 64 MB S3 UniChrome Pro IGP.

  Further to have better graphics during the game, I bought recently NVIDIA GeForce FX 5500 256 MB AGP 8 x video card. Since I installed this card, windows has installed its driver game by default "Microsoft generic display drivers" and the quality of the graphics is off nominal. Also the 1366 x 768 resolution widescreen is currently not available. The best resolution I have now is 1024 x 768. In this resolution, the graphics of Windows seems very strange on my LG 19 "widescreen monitor.

  I tried to install the graphics card drivers on the NVidia site for the old version of Windows, but the drivers are installed with an error message "Pilot" not Compatible with this Version of Windows.

  By default windows drivers has release date older than the drivers supplied on OEM for Windows XP.

  Please help me to get the drivers for the AGP card compatible with my Windows 8 Pro.

  Or how can I force install the older drivers in Windows 8.

  Hi Amit,

  Windows 8 compatibility reports that NVIDIA GeForce FX 5500 graphic card is compatible with Windows 8. Check out the link

  You can check if you have downloaded the 64 bit version of the graphics driver rather than 32-bit.  It could be the possibility for this error message.

  Or select the option on the Nvidia site to scan your system to find the correct driver?

  http://www.nvidia.com/download/index.aspx?lang=en-us

  If you still receive an error message that the driver is not compatible, then you try to install the driver in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows/Program-Compatibility-Assistant-FAQ#1TC=Windows-8

  If this does not help, I suggest you check with the NVIDIA support.

  http://www.nvidia.com/page/support.html

  Let us know if it helps.

• for Compaq v6000 laptop video card drivers

  I bought a laptop Compaq Presario V6310US used, with Vista installed.

  I installed Windows 7 Home Premium. All the drivers have been installed with the exception of the video card. The drivers are supposed to be 100 NF - Spp nForce 430 go. I tried to install the drivers on the Nvidia driver page, but they would not install. Anyone know where I could find the right drivers for the video DART? If not, is it possible to upgrade the video card? I would like to be able to do graphic editing, but right now I can't yet run the bubble screen saver.

  Thanks for any help!

  Have you tried your graphics driver for Vista?

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3370426&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  You mention the recommended driver by train to Nvidia.Did, you use the Autodiscovery feature?

  http://www.GeForce.com/drivers

• Compaq Presario 5400US - need network drivers for XP Home Edition. Wired connection.

  It woun't connect to internet using a good modem and cable (other PC connect successfully using this same equipment). When I type IPCONFIG, I get 2 results, one for Local Area Connection2 for LAC3. Two of them have 169.254.xxx.xxx IP addresses. Both Suffixes DNS blank and empty default gateways.

  When I go into network connections, the LAC2 says "Limited or no connectivity", but it lists a Linksys LNE 100TX Fast Ethernet Adapter. Linksys? I don't have any Linksys product. LAC3 says 'Connected' with the help of a WAN network driver. However, in the Notification area network connections has the same yellow triangle as LAC2. When I right click the icon in the Notification area and select "Repair" I always get the following ".." following action cannot be completed: renewing your IP address.

  If I right click LAC3 (the one that says 'Connected'), click Properties, click TCP. IP and select Properties, it is set to get an IP address and an address of DNS server automatically. It is also the same for LAC2.

  Client DHCP, DNS Client and call the CPP are started.

  I tried ipconfig/release, ipconfig/registerdns, ipconfig/flushdns, netsh winsock reset. When I run it ipconfig / renew I get messages (after he is sitting there for 2 minutes)
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...

  A run chkdsk /r have run the command netsh int ip reset reset.log.

  So, I went 2 network cards, restarted in the device and removed Manager and let Windows reinstall. Windows creates a new connection to the Local network (LAC4, 2 and 3 are gone). It only reads limited connectivity or none and is using Linksys LNE 100TX Fast Ethernet Adapter, like the previous LAC2. The previous LAC3, who uses the network never got WAN driver reinstalled. I don't understand.

  Since an adapter Linksys on a wired connection seemed odd I have tried to find what should be the correct network driver.

  I google "Compaq Presario 5400US" "driver ethernet" OR "network driver" and was taken to a page of drivers HP, which I think makes sense since HP now owns Compaq
  http://h10025.www1.HP.com/ewfrf/wc/s...UCT=93284#n430
  This page has nothing listed for network or chipset cards.  This, of course, has no meaning for me.

  Can anyone help?

  Select this version from the drop-down list on the link that I posted above.

  Depending on the size of file, it does not resemble an auto install file. Accept the agreement and unzip the file into a folder.

  So, download it to a folder and go to Device Manager.

  Click the network card in need of drivers, and then select manual search for drivers. Navigate to the folder where you extracted the drivers and the driver should install.

• Compaq Presario CQ5300UK Graphics Upgrade

  Hello, I have a Compaq Presario CQ5300UK and I plan on upgrading to a 1 GB graphics card. This card would fit into my PC?

  www.PCWorld.co.uk/gbuk/PNY-NVIDIA-GeForce-gt-430-PCI-e-Graphics-Card-1gb-08623397-PDT.html?intcmpid=...

  Thank you

  Hello:

  You should be fine with this card as it meets the specifications of your P/S and has the x 16 PCIe form factor.

  I also like that it is a nVidia card, which should play nicely with your card chipset mother nVidia.

  Because it has a HDMI port, it can disable your integrated sound card when you install it.

  Be not dismayed.

  Simply go into your BIOS, search for the audio setting on board. Change auto to "Enabled". Save the setting here and when you exit the BIOS.

  Then you'll once again on board sound and audio HDMI when you connect a TV to your PC with a HDMI cable.

  Paul