Compaq Presario CQ57-445EQ: recovery of the BIOS Compaq Presario CQ57 445EQ

Similar Questions

• 15 laptop: power on recovery after the bios update

  Product name: laptop 15
  Operating system: Microsoft Windows 8.1 (64-bit)
  Product name: laptop 15
  Operating system: Microsoft Windows 8. 1
  Help, please! My non disabled. East 69730304

  @Jacks95

  Enter 76698920

  Kind regards

  DP - K

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

• Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

  Hi people,

  The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

  The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

  I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

  Any ideas? Flash player won't work if BIOS recovery is not pulled up?

  All ideas are welcome.

  See you soon

  Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

  1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

  2 - Insert the memory stick with the bios in the dead computer.

  3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

  4 - wait for the update at the end.

  My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

• ENVY 700-430qe: ENVY700 - 430qe.doesnt start.cant go into the BIOS. HOW TO FIX BIOS USB WITH HOTKYES?

  Hello!

  The last time to check other HARD drive I change in the BIOS ACHI to IDE

  checked the HARD drive and IDE to AHCI back... accept and

  restart the PC

  And now

  When I start my PC it doen't boot.

  After the news on the video card, I see only round blue "HP".

  When I try to go into the BIOS and press F10 I can see only

  

  It's her! Feeze!

  I removed all the cards PCI and HDD - ho help.

  I have zero CMOS - no help

  (When I start the PC the LED HDD desktop Flash two short time and OFF)

  LED WiFi miniPCI WiFi card too

  If I insert the USB key for sturtup LED on USB drive flashes)

  Seems to me that something wrong with the BIOS or HARD disc controller...

  Now, I think that CD/HDD is not recognized

  but I hope that USB still works

  Please help me find the difficulty of the BIOS the USB drive procedure and shortcut keys.

  Before I read something 'PowerButton + Windows key + B'... but can't find it :-(

  Thank you.

  Hi there @BobMarley

  I understand you are looking for assistance for the recovery of the BIOS by using the shortcut, or by using a USB key. I'm happy to help you with this.

  Here are two documents for you to check. Of course, the first is specific to desktop computers and covers the shortcut key. The other property that for laptops also includes a section on the use of a USB device.

  Desktop HP - BIOS recovery

  HP Notebook PC - restore BIOS

  Also on the support forums, there is a process described by @HaggisCat, you can find of use in the preparation of a USB flash drive. You will need to have the correct BIOS softpaq to go with it.

  How Flash BIOS without HP Partition tools

  At the time I'm posting, there are few maintenance forum, so I can't find the correct file, but it should be found here under the BIOS of the page section software and drivers: HP ENVY - 700-430qe CTO desktop

  I hope this helps. Let me know if you have any other questions.

• Computer laptop 15-ay011nr: access to the BIOS

  Hello

  I have a laptop HP dating a week 15-ay011nr that does not allow me to access the BIOS. I do not see the message "press ESC for Boot Menu", but it starts directly on the hp logo.

  With reference to this previous post:

  http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Access-to-BIOS/td-p/1504303 on a Pavilion dv6

  I tried all the steps except the last (remove the RTC battery).

  I wanted to make sure if this solution applies to 15 laptops and if I do this or else, given the warranty has not expired

  Any suggestions/help would be greatly appreciated

  Kind regards

  KristiD

  Only other thing I can think of who isn't in this post is to restore the bios, you can now win + keys B and turning on the holding of these keys, you can release it when the update/recovery of the bios screen
  
  After that try with Esc or f10 key immediately after the power
  
  If this does not work then I would recommend to contact your warranty computer HP

• How to recover the Bios on Satellite A300

  Recovery of the bios on the computer laptop satellite A300?

  Hello

  The BIOS can be updated in Windows OS.
  What exactly do you mean be retrieve?
  You want to downgrade the BIOS?

• The BIOS boot freeze

  HP Pavilion HPE h8-1020

  Windows 7

  Computer starts and stops on the ESC press for more boot options screen.  No beeps.   ESC does not work.

  This day-

  1 disk hard disconnected; no luck

  2 disconnected memory in different order (2 sticks of 4 GB each); no luck

  3 tried another power supply; same thing

  4. tried a different keyboard/mouse; no luck

  5. removal of discrete video card and used video mobo; no luck

  Notes:

  -When I removed both sticks of memory, had beeps acknowledging memory was gone

  -When I didn't have a keyboard is plugged in, it recognized keyboard missing

  Suggestions?

  Thank you.

  Darryl

  The steps you have taken to solve the problem would lead me to believe that the motherboard no longer works correctly.

  You observe a code flashes when you press the power button? a flashing red button would indicate systemboard failure.

  On-screen error messages?

  You can try to recover the BIOS. Follow the procedures on this document from HP web compared to the version of the BIOS that has your PC. In case of recovery of the BIOS, then all should be well. If this isn't the case, then it is time to get a replacement PC. You can recover data from a hard drive on the computer when you install in another PC under Windows.

• Compaq Presario CQ57: Need to get into the BIOS boot options received the disabled system error 59025057

  Need to enter boot BIOS options have system error disabled 59025057 also want to disable the password of the bios for the future

  @thatmomgamer

  Please enter:

  46983099

  Kind regards.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Compaq Presario CQ71-320SA: failure of the update of the BIOS via Support Assistant / should I update anyway?

  This morning I found that my laptop had not finished closing 8 hours ago. I stopped by pressing the button Off for 6 seconds and restarted. I then looked a likely cause and saw that a BIOS problem was probably the cause.

  I'm went to the site of HP support & with information about http://support.hp.com/gb-en/document/c00007682, I followed step 1 and I saw that my BIOS is F.11 21/08/2009.

  Support site told me that I need F.11Rev1/20/10/2014. I installed, rebooted and saw that he had failed.

  What's worse, is that the program Insyde update it says that the 2009 version is updated - see below.

  A kind person could tell me what I should then?

  

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Hello

  You can manually update the BIOS for your laptop by downloading from the link below:

  The current version available is F.23

  http://ftp.HP.com/pub/SoftPaq/sp51501-52000/sp51527.exe

  Once the download is complete, double-click the downloaded file and follow the instructions on the screen.

  You will notice may-continuous display blank for a few seconds, which is quite normal. Once the update is actually the device automatically restarts.

  Note to back up your data before performing the update. Also have your adapter connected to the laptop.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• Presario CQ57-339wm: System disabled, the bios password removal?

  Hello

  I was wondering if someone can help me, I took laptop to my son to be online too, and it has a protection of password from the bios that he will just give me.

  I would like to know if there is a way to remove this password.

  The laptop is a presario CQ57-339wm and it gives me a message that says "system disabled 63245304.

  Thank you in advance.

  Hello:

  Please read the first post on the link below, which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Try to find the BIOS for Compaq Presario C300 (C350EA) file

  I tried winflash BIOS to a Compaq Presario C300 (C350EA) but it failed.

  The machine still messages, but it can not find a disk hard when you install windows on the CD.

  The HARD test in the BIOS disk still works, like the rest of the BIOS screen.

  Now, I'm trying to Flash the BIOS from disk BACK/external using PHLASH16. EXE, PH1614. EXE and AWDFLASH. EXE.

  In each case, the files of bios provided by HP here do not work:

  http://h10025.www1.HP.com/ewfrf/wc/previousVersions?softwareitem=ob-51160-1&cc=us&DLC=en&LC=en&OS=22...

  Utility in the BIOS but power load hook or warn that the "signature of the platform is not not in the interface.

  Any help with this would be most welcome.

  Thank you very much

  Carlos.

  Hi AxshunJaxun,

  I thank very you much for your detailed and helpful response.

  I had already tried all of those, but your screenshot of a Win7 installation has helped me tremendously.

  You see, I tried to install the original version of Windows Media Center Edition (MCE) 2005, which corresponds to the label of license on the underside of the laptop.

  So after seeing your post I threw a Win7 disc in the drive and tried to install it, just to see how the installation program.

  Not surprisingly, the Win7 installer detects the disc perfectly but report it as being on an advanced interface for AHCI.

  Unfortunately, I don't have an additional license for Win7, so I am forced to persevere with Win MCE.

  So, now I'm at the stage of trying to force the installation of Win MCE program to see the HARD drive by installing the 3rd AHCI driver.

  For the moment, I have the installer of Win MCE see my external floppy drive but I can't find the right drivers for the HARD disk controller. Installing Windows reports that "the txtsetup.oem file is not found.

  I tried to download and run the Intel SATA AHCI Controller driver file to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-39535-1&cc=us&dlc=en&lc=en&os=228&product=3255527&sw_lang= , but it fails with the error 'error Windows N. 5 access is denied. Disk error n. 69 on track 0, head 0 "or"the current image format is not supported by the drive.

  EDIT: I used WinImage to unpack the disk image file and manually wrote the files on a diskette.

  Thanks again for your help, it seems to have worked. Will update again when the installation ends.

  Carlos

• Compaq Presario CQ60 - how to reset the bios password?

  Mr President.

  My compaq presario cq 60 I forgot the bios password (Administrator password enter?). After 3 attempts I got a code 63186857 please help me.

  Hello

  Come in:

  72884299

• Compaq presario cq60: resetting the bios password

  Please help, try to reset the bios password for compaq presario cq60-419WM forHP

  SN: 2ce922196f

  PN:nv243ua #aba

  Thank you!

  @kevon31st

  Come in.

  1	flegq
  or 2nd	huxsypk

  You may need to do this.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.