Compaq presario cq61: bios

Similar Questions

• Compaq presario cq61-408sl: compaq presario cq61 bios bios upgrade f24 o Reinstall f15

  Hi I have a bug for pc power is not just a part of the bios, but when it warms up a bit ', then I need to try to update the bios and now currently ' F.15 version with a more "recently I thought that le.24.Chiedo f so you if you could give me the link to download this day thank you." My product is: compaq presario CQ61-408SL mother of model WN531EA code don't know ' where trova. Fatemi know thanks

  Hi @mario63_2

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you are looking for a bios update for your compaq presario CQ61-408SL. Your current version is F.15.  It is the recommended version for your laptop.

  Update the BIOS.

  Please note that caveat on the above document.

  I'm including these documents, I don't know whether you need it or not.

  An overheating and Auto Shutdown problem troubleshooting

  Reduce the heat inside the PC to avoid overheating

  Good luck!

• Compaq Presario CQ61 BIOS password unlock

  After rebooting my system, I come to a screen to enter the system password. The only thing is... I never put this and there is no way around it.
  
  I tried the battery take reset WHAT CMOS thing who used to work in the jobs without success.

  This is the message I get after too many password attempts.

  key deactivation of the system 92931076

  Try chick.

  23699078

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Compaq Presario CQ61: BIOS disabled system

  Hi there;

  Found my old work laptop and I forgot my bios password. System is disabled with the key: 84018180.

  I'm also really curious how to get code unlock, based on the key...

  Hello

  Please enter:

  31970106

  Kind regards.

• Compaq Presario CQ61: admin password Bios

  I used a password on my BIOS 4years ago. Today, I need to make changes and not remember. After trying 3times, he asked the password for administrators with an another 3failed of the trial, it showed an error meddage thus: 'Turn off system' [57211287]

  Can I still use both of my windows on different partitions, but I need to make changes in order to run a virtual machine to my linux server.

  Please I need urgent help

  Its a Compaq Presario CQ61

  Thank you

  @belacom

  Enter 48179809

  REO

• COMPAQ PRESARIO CQ61: Recovery of Bios Password COMPAQ PRESARIO CQ61

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 7 (32 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 50949691

  Hello

  Please read the first post on the link below...

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Recovery, password Bios COMPAQ PRESARIO CQ61

  Hello

  I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios.

  The message that appears is "ENTER password or POWER ON PASSWORD".

  What can I do? After failing 3 times I get the message "System disabled" and the code 73585421.

  See you soon

  Hello

  Come in:

  62483407

• COMPAQ PRESARIO CQ61: Error ENTER PAST ADMINISTRATOR OR POWER ON PASSWORD password

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 10 (64 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 59329588

  Please try-

  46081508

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the button white Thumbs Up on the right of say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

  Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

  Hi @patrik13,

  Thank you for the update and confirmation.

  You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

  Thanks in advance.

  Good luck with the repairs.

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• Compaq Presario CQ61 - 417SA Notebook PC Freeze issues

  Hello everyone

  I have a Compaq Presario CQ61 - 417SA Notebook PC running on Windows 7 Home Premium. The laptop freezes at random times, sometimes minutes after use or an hour after use. It does not result by clicking on a program or a file. I have printing freeze the problem may be caused by the failure of the hardware, possibly the HARD drive.

  Here are a few observations from the laptop and the things that I tried to diagnose or repair.

  • During a typical blocking the HDD LED light is always on
  • Also had the blue screen and freeze black screen
  • No error message
  • Hard disk becomes very hot
  • Entered the BIOS and run automatic test of the primary hard drive and memory Test using InsydeH20 Setup utility but it went together.
  • Laptop computer has been completely reset to factory settings so it is impossible due to the high utilization of the processor
  • Idle while the CPU usage is generally of the order of 13%-25%, with a peak of rare of 53%
  • The hard drive is a Western digital Scorpio Black 320 GB 2.5 "SATA

  The laptop is not used so wiping back to settings to original wasn't a problem, but I would like to return to a usable level.

  Thanks for any help you could offer

  Mike

  I was certain insistence autour in my computer and I'm done to restore back to factory settings. So far, it has not frozen and seems to work properly.

  I tried updating the BIOS with HP Support Assistant, but it does not work. Hoping to solve the problem I went online and updated my support Assistant. After this success, I then managed to download the BIOS from internet F.15 version I was also looking for. Everything seems to work quite fine at the moment, although there are a few updates to Windows that will not be installed. The progress bar shows the animation download but the installation hangs at 1 / 8. Some items are classified as "recommended" or "important" so any help with this problem would be immensely appreciated!

  Mike

• Compaq Presario CQ61 wireless problem

  I use a PC Compaq Presario CQ61-411WM with Windows 7 Home Premium 64-bit, and I am not able to connect to the internet, because the PC does not detect the available wireless networks. The HP wireless assistant reported that the wireless device is disabled in the Device Manager. However, when I check the device under network adapters Manager, Realtek PCIe FE Family Controller does not display an error or a problem. I'm really very happy for any help with this. Thank you.

  Hello:

  Well, the only thing I can think of to confirm that your wireless card did or didn't die is to go into your BIOS by pressing F10 at HP welcome screen and see if there is a configuration menu of devices and make sure that your wireless adapter is displayed.

  If it does not appear, make sure that the setting is set to enabled.

  If it is not, then I guess that the card is completely broken.

  If it is listed and enabled in the BIOS, then you have a major software problem and my solution would be to save all the files you want to keep and perform a system recovery.

  Paul

• Compaq Presario CQ61: BSOD - memory management error

  Hello

  So, I have my other laptop, Compaq Presario CQ61. For like 5 or 6 months I had a lot of problems with it, like freezes, BSOD-s and not to forget that convenience store was down. I transferred all personal files on the external HARD disk and decided to reinstall Windows (7 - legal copy), hoping that the problem will be solved, but in vain. Finally, I installed Windows 8 Pro, because as said in the forums, people, it may be a problem with the installation disc. For like 4-5 days my HP laptop was running well, all the updates that are installed (haven't seen it lately), I just thought it was a miracle and my problem is solved. Today, he appeared. BSOD. After reinstall or to install both versions of Windows, I had, it is my belief that it is a hardware problem. I tried the memory management test and the result was something like "problems were found, contact your manufacturer. So my question is, is it a problem of RAM or a HARD drive? I've heard both versions, and if someone had in the past has the same symptoms as my laptop and he managed to cope, please enlighten me as well. Thanks in advance.

  Hi @Calin1 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your Compaq Presario CQ61 and works very well, and then get the BSOD and stop. I recommend to restore the default BIOS settings if you can get it to go to the screen. You could restore the BIOS with this document by selecting the reload the default BIOS settings. No restoration. Restore default BIOS is necessary because I think that this will solve the BSOD.

  Here is a link to solve the BSOD if the restoration of the BIOS does not help.

  If this does not help at the end of the document it tells you to do a test equipment.

  The hardware test indicates if any parts are missing or have problems.

  I hope this helps.

  Thank you.

• Compaq Presario CQ61-416SA: upgrade the Compaq CQ61 wireless card

  I have a Compaq Presario CQ61-416SA, running 64-bit Windows 7 application. The current wireless card only works on the 2.4 Ghz band and I want to upgrade to a dual band to get the best speed etc. to 5 GHz. I have an Intel Centrino N6230 of replacement card, but the phone will not accept anything other than the default map. At the start, it stops with an error message saying that it will not continue unless the "unauthorized device" is deleted. If I re - install the original wireless card, it starts and works very well, but this is not the point, I would like to update.

  I guess that the default is to lock the part of the BIOS of the laptop to prevent alteration unauthorized with laptop computers under warranty, but mine is well outside the guarantee.

  I know that the card works because I installed it in my laptop previous and I have been in electronics for 30 years and spent about 5 years of this repair of computers laptops, desktops, servers, etc so I'm sure that I am able to connect a card and the driver installation!

  There does anyone know a way around the block? I won't to be able to upgrade the laptop without it.

  Anyone?

  Do not completely blame HP, but it was little 1984 involving your federal Government. HP and Lenovo read a few Federal Communications Comm regs on the recording of radio portable wireless (including the computer wifi cards) to require that alternative cards are blocked. Other laptop makers has not agreed and now the 'white list' is history, but there is no effort to go back and make new BIOS for older models.

  HP wireless card versions have specific identification in the firmware looking for the HP whitelist before clearing the map to use if you use the version of HP. I looked pretty hard for a version of HP of the card and the one I linked is everything I could find. Google around and you can do better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq presario cq61: ssd in presario cq61 - 430ev

  I have a HP Compaq Presario CQ61.

  I just bought a Kingston HyperX Savage 240 GB ssd for my laptop, I had already upgraded to windows 10. The placement of the drive was a success, but during the 'clean' windows 10 installation asking the the disk drivers. I contacted the support service of Kingston, and they said this:

  "Please note that we do not really any specific drivers, the SSD would benefit from the planned system of system.
  Some systems may require a storage of pre-installation F6 driver, who usually provided by the manufacturer of the system in your case it would be HP.
  We recommend to check the following:
  -If it doesn't matter what Windows 10 associates BIOS update available for your system (make sure than his most recent available for your system)
  -Pre-installation F6 for your system storage driver (check the site of HP for these drivers).

  Then I updated my system to the latest version of the BIOS, but nothing has changed.

  I looked on the HP site, but I can't find any "storage of pre-installation F6 driver" or any other driver for ssd, so I can't install windows and use my laptop. What I would do about this problem? Help, please!

  Thank you very much!

  Hi @stepolis,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your notebook Compaq Presario CQ61 and problems with a new install of Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  Thank you.