Compaq SR5010nx

Similar Questions

• Power supply Compaq SR5010NX

  Currently I still have the original power of 250W and I was wondering what I could spend it with. I want at LEAST 300W PSU. I just need to know what might work. And if possible suggestions. Money is a bit weak at the moment.

  Thanks in advance.

  All that matters is the size of the power supply. Most of the HP desktop PC contain power supplies ATX 6 inches (15.25 cm) x 5 inches (12.7 cm) x 3.25 inches (8.25 cm).

  If possible go to 350W, I'm sure that the price difference won't be much.

• Compaq presario sr5010nx does not recognize cpu

  Hi guys my dad have a really crappy computer (cannot run the half-life 1) and I want to give him my old (also shitty, but less) which I use no more. I bought a new processor, an intel Core 2 Duo E4300 1.80 GHz 2 M 800 MHz processor LGA775 Conroe, which is on the list of caught cpu supported by the motherboard (945GCT-HM (Livermore)) on the website of intel. When I changed the cpu, apply the thermal paste and it started
  I got "ERROR: unsupported processor installed.
  PC will turn off automatically in a few seconds "message and I wonder why it does not work. Is it possible that the CPU is broken? I bought on ebay so it would not be surprising. I also changed the power supply which fried for a 550W and added the new ram, 1 stick of 1 GB and a 2 GB.
  
  P.S. I asked on another Web site and all they told me is get a better machine, please do not. My father is really not great matches and I don't have the money for her ^^

  Hello @Charlesesteban,

  I understand that you are having problems with upgrading the processor on your desktop Compaq Presario SR5010NX. Well well, according to the HP Support document: upgrade or replacement of the processor you have followed the steps correctly. The TDP for the original and intel processor Core 2 Duo E4300 1.80 GHz 2 M 800 MHz LGA775 processor are the two 65w so this isn't a problem. I suspect that you're right in that the new processor is faulty.

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Compaq Presario SR5010NX: One of the two locations of memory not recognized / work

  Had already upgraded RAM from 512 to 1 GB.  In an attempt to level again with a 2nd (identical to the first) 1 GB DDR2 DIMMS, I discovered that the 2nd module of memory was not being recognized.  I also tried with success the new! G in the first taken.  Specification to support up to 2 GB with 1 GB DDR2 DIMMS in each shot. However, "no beeps" and not "start with anything in the second taken.   I also tried two 256 KB RAM modules and as the two 1Gs only the a 256 KB has been recognized.

  I also tried to boot with a module in the 2nd outlet only and found that my system wouldn't start.  Any suggestion would be appreciated.

  C001uS

  Thanks again for your response.  I went not the CMOS battery. However, your answer made me look on a possible revision of the BIOS through HP customer care.  I downloaded the version of BIOS the same but with a more recent date.

  After download and install I shut down my computer, insert the 2nd module of 1 G and made a new shoe.

  Happiness is a system of 2 GB Dual Channel now running.

  PROBLEM SOLVED

• Name - 2 or 3 good programs FREE to remove TROJANS from my old Compaq?

  Here's the situation. I have an old Compaq Presario V6000, working with XP. from now no budget for another computer. The place I'm in, just put hi speed connection.
  I want to get a FREE program to delete Trojans and would like to know, what you're suggesting? Thank you.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• 1000N8601020-b: recover password for Compaq Presario PC

  How to find the password for a Compaq presario SR5710Y PC, which was given to me by someone who doesn't remember his password.

  Hello:

  If you are looking for the Windows password, unfortunately, I would not be able to help you with that.

  If you are looking for the power on password (BIOS), see the link below, last element (clear the BIOS settings) and inside this section, read the clearing BIOS password settings.

  http://support.HP.com/us-en/product/Compaq-Presario-SR5700-desktop-PC-series/3823953/model/3867472/document/c01237538/

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Compaq mini cq10 bios password reset

  Please I need help to reset my password of bios compaq mini cq10 CNU0184TCN.

  Hello

  The unlock key is: e9l13uvae9

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• HP Compaq nx6610: power on password

  Hello

  I wonder is that someone could help me please with the power on password problem.

  I tried a few times to remove the battery CMOS even for hours but still not the same error.

  Any other suggestions?

  HP Compaq nx6110

  P/N: EK230ES #ABB

  I did enter 3 times and don't get that (*)

  @Skillie91

  Then SECURITY RIGOUREUSES is likely activated.

  

  I'm sorry.

  REO

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• driver for hp compaq 8200 elite ultra need driver for PCi and PCI simple communication controller

  HP Compaq product xz788ut #aba

  32-bit Windows 7 profesional

  delete the original version and install our Win7 32 bit

  a 320 employees

  Hello:

  Who says it's the AMT driver that is necessary is what I gave you.

  Try the IMEI.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-93346-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 472276

  Paul

• SPDIF out on Compaq CQ40-122AX

  I have a Compaq CQ40-122AX, running VISTA home basic sp1.

  There IDT High Definition Audio built in and a HDMI output. He also says that it will be an available SPDIF output using a HP/Dock. Now, I'd like to use the SPDIF output, but I am reluctant to by the docking station for £200 as advertised on amazon. In the options for the Soundsetup there is a definition available also SPDIF.

  IDT HD Audio Codec driver version: 1.0.5934.0

  For IDT HD Audio DEVICE driver version: 6.0.6000.16386

  Only the input/output Audio/video are:

  VGA

  HDMI

  Headphone 3.5 mm

  Microphone 3.5 mm

  I had a browse autour and found that some HP models spdif output available via the Jack 3.5 mm as optics, when the adapter is plugged it activates an LED inside and that it moves the optical signal to the Toslink cable.

  Adapter cable and optical at Maplin

  My question is, the SPDIF is accessible on my model of laptop CQ40-122AX with this configuration without the HP docking station or could there be another way? Since there is not in there, it must be possible to access it somehow, and the docking station just seems too expensive to make sense.

  Look forward to hearing responses.

  Message edited by Sven on 18/01/2009 05:27
  何思凡
  
  Compaq CQ40-122AX, Vista Home Basic 32 bit, AMD Athlon x 2 1.9 Ghz, ATI Radeon HD3200, 1 GB of RAM,
  
  -Each one favor Post back your results, resolved or not - LET BRAVO!

  No solution is presented using computers laptops, built in the ability to use SPDIF for DD and DTS streams. The only solution that I found satisfactory is the external soundcards next via a USB port.

  I use the product bought in Hong Kong, works well with XP and Vista, that's what I tried ebay. The least expensive solution to the s/PDIF output, I found. It is an optical output.

  http://CGI.eBay.co.UK/5IN1-USB-6-channel-PCI-external-moveable-5-1-sound-Card_W0QQitemZ220338593076QQcmdZViewItemQQptZUK_Computing_ComputerComponents_SoundCards?hash=item220338593076 & _trksid = p3286.c0.m14 & _trkparms = 72 %3 A 1300 | 66 %3 A 2 | 65 %3 A 12: 39 %3 A 1 | 240 %3 A 1318

  http://www.Google.com/products?complete=1 & hl = in & q = USB + to + Converter + SPDIF & um = 1 & ie = UTF-8 & his = X & OI = product_result_group & resnum = 5 & CT = title

• Compaq Presario SR1150NX: Error, disk Compaq recovery dead

  Hello, I have a desktop Compaq Presario SR1150NX of 2005. Everything works well in it and we emptied dust not for long. But then, one day I went to start it it says a critical system file was missing. I'm confused at first. After half an hour, creating a USB disk only to find it didn't work, I then had to use the Windows XP Recovery Console. Then after I fixed it it still didn't start because it couldint find the file. But when I start the computer, it shows me that, if I press F10, it boots into system recovery mode. OT started and told me that I could boot into windows xp system recovery. But in the middle of this, the computer overheats and shuts down. When I tried to turn it on again it gave me a disc error AND when I boot in recoervy, it's just bluescreens. Now when I turn on the computer, it does nothing.

  Is there any where where I could download a recoervy tool to open the hard drive in order to get the data on the drive and get a new drive? Or get a Windows recovery disc?

  Any help is the Apprecited!

  Remove the disk from the desktop.

  Buy

  USB 2.0 for HDD SATA/IDE adapter 2.5/3.5/5.25IN drives w / adapter

  See: http://www.ncix.com/detail/usb2-0-to-sata-ide-drive-adapter-a3-17762.htm

  and connect your hard disk with this adapter to a USB port on your computer.

  When you connect, Windows will ask your permission to run 'check disk' ('CHKDSK') to review and fix any problem of file system.

  I think that the corrupt currently-system files on the hard drive is causing startup problems you reported.

  Re-connect the desktop "repaired" disk drive, and then try again.

• Compaq Presario SR5605UK: WINDOWS 10

  Hi, actually I bought a downloadable version for windows 10, and I was wondering how can I do to set this up? I have a Compaq Presario SR5605UK sound very old desktop PC, and when I put my disk in my computer, I press the name of the file, it says that it cannot install it? Like what I'm doing! Im stuck and I tried all night! His dribing me crazy! Help, please.

  Hello:

  You may need to transfer the ISO file downloaded to a flash, DVD, or USB drive, but you can not just copy and paste it here.

  Most people use this tool to do.

  https://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool