compaq620: all the exe files do not work. I can not install any application

Please help me on this problem... I tried solutions like deleting this file open exe, restore the system while pressing f8 keys etc., but they did not work... so please give me a successful solution

idyseye wrote:

Please help me on this problem... I tried solutions like deleting this file open exe, restore the system while pressing f8 keys etc., but they did not work... so please give me a successful solution

You want to use F11 to access the option to restore it if your hidden partition has been deleted. Otherwise if the hidden partition is gone, you can buy the restore disc to restore your system to factory-installed.

Tags: Notebooks

Similar Questions

  • Windows 8 store does not install any application

    Hello Microsoft. My name is Mikado and I own a dell pavilion g6-2301ax. It comes with a windows pre-installed 8. The problem ive had to deal with is that the store windows does not install any application. After you download the application, it displays a message that the application could not be installed. The same thing happened with the update of windows 8 for windows 8.1.  Could you please help me with how I can solve this problem

    Thank you citrus but it was actually the firewall in my system that it blocked. I had to install the BFE service that does the work. Now I can install any application from the store windows.

  • All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

    All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

    Hello

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    You can try a repair install or an upgrade in Place.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 for virus and spyware help
    infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

    Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

    Hello

    Could you please check this thread, it might be useful

    Muse exporting is not svg, can only see Preview

  • I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

    I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

    Hi Anish,

    If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

    Here are a few methods you can try to solve this problem.

    Method 1: Run the Windows Update Troubleshooter.

    Open and run the Windows Update Troubleshooter to fix the problem automatically.

    Method 2: Run the troubleshooter for Internet connections.

    Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

    Method 3: Restart the Windows update service and check.

    a. press or press the Windows key + R, type services.msc and press ENTER.

    b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

    c. find the Background Intelligent Transfer Service and check the status.

    d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

    e. search Windows Update and check the status.

    f. If the status is stopped, click Windows Update, and then click Start menu.

    g. close Services.

    Method 4: T emporarily disable the security software and verify.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    You can also check out the link and check if it makes a difference.

    Solve problems with a soft

    Please an update of the results to help you further.

  • Is that we can run all the EXE files in silent mode?

    If yes how we specify the configuration (our entries in a normal graphical installation).

    My need is that I have the exe file I want to run through cmd script or batch.

    now how can I specify the entries in command line or a batch script

    or do Fund of any separate file to store these values

    You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  • all the .exe files listed as secfile, the type cannot fix association; Vista

    All .exe files are listed as type secfile on my daughter, running Vista laptop.  When you try to open any executable file, an error message is received "application not found".  I found several websites with the .reg files to fix the registry.  The problem is that none of the methods to enter the registry editor I've tried have worked, because it is also an executable.  I tried to reboot in safe mode to use the system restore and that will not open either.

    Any suggestions?

    Replying to myself because I found the answer elsewhere: the association for .exe files must be "exefile".  "secfile" probably shouldn't exist, because nothing else seems to refer to it, but as I deleted the application there is probably no harm leaving.

    So, for someone else in my situation, the solution is to assign to HKEY_CLASSES_ROOT\.exe exefile.

    If you do not have Open regedit, you can put this in a .reg file and double click it

    Windows Registry Editor Version 5.00

    [HKEY_CLASSES_ROOT\.exe]
    @= "exefile".

  • My Win 7 said all the exe files that I download a virus and deletes it

    No matter what exe file I try to download it appears and says that he has a virus and deletes the file.  Gives me no options to go ahead and run the case.

    Niether win7 or IE will produce all this 'Virus '. msg... »

    The only app that will produce a msg saying 'Virus '.... "is your application antivirus or third-party plugin that is built into IE.

  • I can remove all the exe. files?

    My hard ddrive fills. I noticed a large file

    Dotnetfx35.exe

    Can I remove it safely? Remove all .exe files?

    Hello

    1 download CCleaner here, install it and open and click on run cleaner.
    2 remove everything in the \Downloads C:\Users\ (yourname) as necessary.
    3. start > all programs > Accessories > system tools > Disk Cleaner
    4. consider upgrading your hard drive.
    5 find the virus that they can fill the free space on the hard drive.
    6 uninstall all unnecessary programs.
    The Dotnetfx3.5.exe can be deleted safely. Do DELETE all .exe files, or it will mess up your Windows.
  • test for DPS application to v32, the ipa file does not install on the iPad

    revised to v32, DPS SE application test does not install on the iPad using iTunes to synchronize the ipa file.  The icon is grayed out, and it just says 'installation', but does not end. Folio test OK in Adobe Content Viewer. Try to get this right for v32 and iOS8

    This means that you have used a .mobileprovision file that is not your UUID in there device. Make sure you use the right .mobileprovision file, and your device UUID has been successfully added to him.

    Neil

  • exe files will not run any programs downloaded recently is not working, error windows can't find the app

    to start windows once the password inserted tab windows process error oxcooooo7b error, I can't access msconfig or regedit nothing extends box run same mistakes for new programs

    c:\windows\system32\msconfig.exe the procedure could not be found, some programs in place same tab all recent programs that I downloaded, I get the same error

    Windows 7 ultimate

    8 GB ram

    desktop PC

    any help app thank you

    Hi Neil,

    Thanks for the reply.

    I suggest going through the article and follow the steps.

    Cannot open. Files EXE in Windows 7 or Windows Vista

    http://support.Microsoft.com/kb/2688326

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry )

    How to back up and restore the registry in Windows.

    It will be useful. Get back to us with the results.

  • Accidentally changed the program by default to open all the exe. files for the wrong program and need a fix

    Any help for my dumbass would be appreciated. Laughing out loud

    Hi davidlangston,

    What version of Windows you are running on the computer?

    Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    Method 2: Run the fixit available in the article below to fix the problem automatically

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

    http://support.Microsoft.com/kb/950505

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

    You might want to know

    What version of the operating system Windows am I running?
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  • I get a message 'windows\system32\palowibe.dll' for all the exe. files. I fixed the directory and tried to restore to an earlier date, but this fails__

    failure of the system restore

    mmattison,
    From what I found, it seems that there is a file attached to a virus\malware.  You attempt to clean your system to get rid of this problem.  This thread covers the ways to eliminate the malware\viruses.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to download whatever it is, said "windows could not open the exe file.

    Once I had deleted all my music in win.med.player. sence then I can't download/open/save everything that is associated with one, "-.» File "EXE" or binary.? " Help, please.

    Hello

    1. what operating system do you use?

    2. it happens with all the exe files?

    3. What are the files he did remove WMP?

    I suggest you try the methods mentioned below and check if it helps:

    Method 1:

    You are unable to start a program with an .exe File Extension (applies to Windows XP)

    http://support.Microsoft.com/kb/310585

    Method 2:

    You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Hope this information is useful.

  • All of a sudden my Elements 7 won't load all the video files not saying not supported

    Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

    If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

    In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

    If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

Maybe you are looking for

  • Java Runtime is required for browser FF work properly?

    I'm not having problems with Java on my system. I want to get rid of it for security reasons, but I don't want to influence my FF browser if it needs Java Runtime to run properly. I just want to know if deleting Java will hurt the Explorer somehow.

  • XBR55X850A Sony 4K 60 fps on PC

    I just bought XBR55X850A Sony 55 inch 4 K Ultra HD 120 Hz 3D and you are looking for a way to connect my PC to car games 4 k 60 frames per second. I have two Nvidia GTX 780, which should be enough from the point of view GPU. But the problem is THAT H

  • C855-1GN satellite - cannot get the audio driver for Win XP

    Hello Can someone help me please?I have a Satellite C855-1GN was on windows 7, but I upgraded to XPI'm all fine workinjg but I can't the audio drivers for xp can any help please thanks tim

  • Replacing the screen on Satellite L500

    Hi all who can help me with a screen or a Satellite L500 laptop to replace mine. Ty Joldor

  • Library closed not included in the executable

    I took a small subsection of the code a lot longer VI I use to assess the rate of Bit error on a tester. This small part of the code that I wanted to use to create a single executable file that technicians could use to the test when manually retry fo