Compare the numbers of channels

Similar Questions

• By comparing the numbers on MAC worksheet cell text

  How to compare the content of text in a cell in a column with the text content of each cell in another column to check for duplication. After checking the first cell, I won't move to the next and repeat the operation for each cell in the first column, ultimately comparing each cell in the first column with each in the second

  A simple way to do this would be something like this:

  

  The formula for C2, filled to the bottom of the column, is:

  = IF (COUNTIF (A, B) ", TRUE," "")

  The formula in D2, filled to the bottom is:

  = IF (COUNTIF(B,A), TRUE,"" ")

  This requires that you compare the contents of a cell in column B with all the contents of each cell in A and vice versa.

  If you want to see if the contents of a cell in column B is contained within the contents of the cells, etc., then a more complicated approach would be necessary.

  SG

• writing cannot be porformed, because data channels number does not match the number of channels in the task

  Hello

  I'm writing analogues of the buffer to several channels using NOR-6723.

  For some reason any, whenever I go to the buffer double function (1-d) that contains buffers for all channels.

  I always find myself with exception indicating that the numbers of channels in the data are '1 '.

  I use c#:

  Task m_TaskHandle = new Task();
  
  string sChannelsList = "Dev2/ao21:23";
  
  m_TaskHandle.AOChannels.CreateVoltageChannel(
  
  sChannelsList,
  
  "", 0, 5, AOVoltageUnits.Volts );
  
  int iNumberOfSamples = 4;
  
  double dSamplingFrequency = 1000;
  
  m_TaskHandle.Timing.ConfigureSampleClock("",
  
  dSamplingFrequency,
  
  SampleClockActiveEdge.Rising,
  
  SampleQuantityMode.ContinuousSamples,
  
  iNumberOfSamples /* Only relevant if mode is FiniteSamples */);
  
  // Data code is heredouble[] adSampleBuffer;// array values removed from this code snippet (here i have function that generates data)// array size is: num_of_samples * total_channels (in this case 4 * 3)
  
  AnalogSingleChannelWriter ChanWriter = new AnalogSingleChannelWriter(m_TaskHandle.Stream);
  
  ChanWriter.WriteMultiSample(false, adSampleBuffer);
  
  m_TaskHandle.Start();
  

  Not sure I'm I missing, how the MSTDIO determines the "number of data channels", I receive as an exception, it is always equal to 1.

  would appricate to help.

  Thank you.

  Hi idanbis,

  As the snippet you posted, you can create more than one channel using the ao21:23 range. That said, you should use AnalogMultiChannelWriter to configure your write instead of AnalogSingleChannelWriter operation.

  To write using AnalogMultiChannelWriter::WriteMultiSample (boolean, double, you must know the data you want to write must be stored in a 2D array.) Each element in the first dimension of the array corresponds to a channel in the task, while each item in the second dimension, to a sample of write on its channel. For example, that:

  Double [,] data = new double [numChannels, numSamplesPerChannel];

  Then:

  data [0, 0... numSamplesPerChannel]; It is the set of all samples in the first string (ao21 in your code).

  I hope that was helpful. Let me know if I left any doubt remaining.

  Best regards

  Anzurio

• When I subtract two numbers DBL and try to compare the result with another DBL, it fails

  I found a curious problem with subtraction and compare numbers DBL in LabVIEW (8.6). Here's how it works:

  1. subtract two numbers DBL such that the result is not incorporated. (Say, 3.2 - 3.1)

  2. compare the result with a constant/control that is on the result of the subtraction (in the example, 0.1)

  3 see the output of the comparison.

  If the result of the subtraction is an integer, the Boolean result is (as expected). If the result is not complete, the comparison fails.

  (Now, if I simply compare two floating point numbers, it works, so the issue is not with the node comparison itself, but with the data that is entered to the node). Can someone understand why this happens? It's unexpected, it's a pretty serious bug.

  It is provided with all programming languages. Numbers do not have an exact binary floating-point representation. This has been discussed endlessly. Never use the equal function with floats. You can use the function in the range and force.

• Compare the IP numbers between virtual machines

  We host multiple clusters with the same virtual machine test and development. Only the external name is different:

  CLUSTER_01, 01-VM001, 01-VM002, etc...

  CLUSTER_02, 02-VM001, 02-VM002, etc.

  I need to compare the IP address of the virtual machine between these sets so I can see if the configuration of the network of these machines is not changed.

  Please help me get a few lines PowerCli.

  You can try this one?

  $clusters = "cluster-01', ' cluster-02'.

  $vmTab = @ {}

  {foreach ($cluster in $clusters)

  Get-Cluster-name $cluster | Get - VM | %{

  $key = $_. Name.Split('-') [1]

  If ($vmTab.ContainsKey ($Key))

  {

  $vmTab.Item ($key) | Add-Member-name "$($cluster) IP '-value of $_. ExtensionData.Guest.IpAddress - MemberType NoteProperty

  }

  on the other

  {

  $vmTab.Add ($key),

  New-object PSObject-property @ {}

  VM = $key

  "$($cluster) IP ' = $_. ExtensionData.Guest.IpAddress

  }))

  }

  }

  }

  $vmTab.Values

• What formula would I use to add all the other ranks in my spreadsheet. I want to compare the fees and expenses of 2015 since they are incurred for 2016

  On the same worksheet, I want a spreadsheet to compare spending 2015 totals by month in several categories to 2016 expenses when they occur. What is the best way to implement this worksheet? It is essentially a budget, but wants to see how the category spending increase or decrease all the months for 2016.

  Thanks for any help.

  Hi Bruddah,

  I would like to start by rearranging your table so that the amounts from here to 2015 and 2016 switch not in the column, as implied in your question.

  Vocabulary of the numbers:

  worksheet not sentence numbers

  Worksheet: A spreadsheet. Usually abbreviated to 'Document '.

  Leaf: a blank canvas on which are placed the tables and other objects. A Document has at least one and maybe more than one.

  Table: an object consisting of one or more cells, arranged in rows and columns.

  Take a look at the personal Budget template (file > new form model...), specifically the summary in the table of categories.

  It uses the formula: = SUMIF (Transactions::Category, A2, Amount)

  Since you want to compare the volumes in several CATEGORIES at the specific two-year MONTH, you will need SUMIFS, using three test values, pairs of condition.

  Syntax: = SUMIFS (sum of the values,test values,condition,test values,condition,test values,condition)

  I would like to know if it is enough information. If this isn't the case, I'll be later in the day to enter more specific details. In the meantime, a screenshot of your table and the lines of (at least) your transactions table header would be probably useful.

  Kind regards

  Barry

• How to find a word in the name of channels?

  Hello

  I want to search for a word in a channel name

  For example, I have 3 channels:

  1 Re_treffensiemich

  2 Re_treffensiemich_ouipourquoipas

  3 Jaimele_pate

  I already have the first "Re_treffensiemich".

  I want to detect the "Re_treffensiemich_ouipourquoipas", its channel number (2) and also read the '_ouipourquoipas '.

  So I'm looking for something to find a portion of a string

  How can I do that?

  Thanks for help

  Fred

  Hi Fred

  I hope that the following script solves your problem. It compares all strings in all groups with a string.

  Dim oGroups, oOneGroup, oChannels, oOneChannel, sChnName, sSearchText
  
  sSearchText = "treffensiemich".
  
  Set oGroups = Data.Root.ChannelGroups
  
  For each oOneGroup in oGroups
  
    Set oChannels = oOneGroup.Channels
  
    For each oOneChannel in oChannels
  
      sChnName = oOneChannel.Properties ("name"). Value
  
      If InStr (1, sChnName, sSearchText, vbTextCompare in) > 0 Then
  
  '      Do something
  
        Call Msgbox (sChnName)
  
      End If
  
    Next
  
  Next
  
  

  Concerning

  Winfried

• Look for the string of the numbered array element.

  This is my first post, so I'll probably miss one thing or another.  I will look nothing missed as soon as possible. I write code LV to test additional County stored in a CSV text file. Counties represent the stimulated current of a diode in a beam of radiation. The product is a QA device for a medical radiation treatment machine. The Integrator output proportional to the current diode accumulates as a whole into account in the text file. My LV code puts the numbers in the tables, calculates the incremental time derived and analyzed statistically. Numbers of the columns in the table data represent unique components. Default number of data column is sorted in a 1 d table has no column number. As if not column 10 represents CR39 of PCB 11. I need an algorithm how to connect a string such as CR39-PCB11 to the element of the array 1 d failure or relate to the string to the column in the data table that fails. Could you suggest a way to do this?

  If I understand you correctly, instead of these numbers that are in the Updates (odd) 'zero', you want to get premium channels. For the moment, the operator uses a lookup table, to find the chain (component) that corresponds to the column number.

  It's easy, because you only need an array of strings (corresponding to the column number 0 n) and use the array index with the index of the column. Place it in a loop for get all the clues of failures (the loop autoindexing for).

  Felix

• Help compare the negative and positive values

  Well guys, I do this example to show you what I mean

  

  With this example, I can get positive and negative numbers in digital

  But for me, the 'negative' mean nothing

  Example:

  If I have "100-200" for me the biggest value is - 200

  But if I compare the values of bouth got 100 as greater value

  I do the same calc for 3 different variables such as A, B, C

  and after that I need to calc whose value is 'more '.

  But my problem is that if I have the values "-350 300-400.

  the largest will be "300", but for me the 'negative' mean nothing

  so I need to the largest value is "-400".

  For all positive values, its works very well!

  I compare A and B, after the highest is on C and have a result!

  but when I have negative and positive values... I had this problem...

  and when I have negative values only I have a problem too.

  '-300-400-500' for me the largest value must be "-500" but labview-watch "300".

  as - 300 is greater than-500 in algebriac.

  And if I use absolute values, I will always have a positive value... but I need to know if the value is positive or negative

  No matter which, can help me with this?

  Thank you

  

  Ben

• Compare the Collection with the help of the Table less

  Hey there!

  my plan is to transfer an excel file and record in an apex_collection, compare the results with those that already exist in a specific table and write it in another temporary table.

  Import excel, in the collection works perfectly, but I fight with the comparation. I select the form of entries collection and using UNMIS to compare lines with those of another SELECTION that gets the lines of the existing table.

  DECLARE

  BEGIN

  INSERT INTO UPLOADED_DID_LIST_COMP (BAC_CODE, UPSC)

  (

  SELECT BAC_CODE c001

  c002 published

  From apex_collections ca

  WHERE collection_name = "UPLOADED_EXCEL."

  LESS

  SELECT

  BAC_CODE

  EDITED

  OF UPLOADED_DID_LIST upld, apex_collections c WHERE

  collection_name = "UPLOADED_EXCEL."

  AND the upld. BAC_CODE = c.C001

  AND the upld. LʼUPSC = c.C002

  );

  End;

  This does not work because of this error:

  ORA-00933: SQL command not properly ended ORA-06550

  PLS-00103: encountered the symbol "end-of-file" when awaits one of the following numbers: (begin case declare exit end exception for goto rise back loop mod null pragma select update while < ID > < a quot double)

  If it's a copy/paste of your exact code then you just need to fix it, spaces here and there. And remove the superfluous where clause. Maybe:

  BEGIN

  INSERT

  IN UPLOADED_DID_LIST_COMP

  (

  BAC_CODE, SCHOOLING

  )

  (

  C001 SELECT BAC_CODE, EDITED C002

  FROM APEX_COLLECTIONS CA

  WHERE COLLECTION_NAME = "UPLOADED_EXCEL."

  LESS

  SELECT BAC_CODE, SCHOOLING

  OF UPLOADED_DID_LIST UPLD

  );

  END;

  Good luck.

• By comparing the divisions between the 2 esx servers

  If I am trying to compare the scores of 2 ESX servers, so I can determine if they have been installed in the same way, what command should I use?  I tried fdisk-lu and while he gives me the partition information, it does not give me the details, I see when installing to/var, / opt, / tmp, etc..

  Thank you.

  You can just run "df" and that he will give in bytes (a lot of numbers to count you)!

  To find the swap partition, if you have a single keystroke "fdisk-l" OR "fdisk-l | grep swap. "

  Andy

  VCP / vExpert / MCTS

  For help, Guides and how Tos, visit http://www.vmadmin.co.uk/

  If you have found this information useful please give points by using the buttons at the top of the page accordingly.

• How to compare the time slices in 15 minutes?

  Using Flash 8 Pro AS2
  
  Have an animation to play once at the first visit to the site, regardless of the number of pages visited within the site. Then start over when to return to site.
  
  I thought that SharedObject would work for this. I managed to do it run at the same time to visit the site and the value of the shared object. Problem is that the animation NEVER play again because the shared object is never removed.
  
  Is there a way to put so it was like a session then that would solve this easy. I don't know how to do if there is a way.
  
  So I decided to make the swf file to check the page reload or if come back once again, site 15 minutes has elapsed. If so, update the time in being shared right now and the animation playback.
  
  Problem is that I have NO idea how compare the time set in the shared object at the moment to check whether or not the 15 minutes has passed.
  
  I tried different things, but the comparison, at the end of the hour, goes into the negative numbers. I am here minutes passing between saved time and the current time. Nothing else for a few minutes.
  
  I'm not a mathematical genius or understand all the stuff that I see out there in the tutorials and code examples, when it comes to the date and the time of calculation.
  
  I need to be. Delete the shared object to the closure or the site navigation browser.
  OR
  Check if 15 minutes has passed then at day time in the shared object and read the animation
  
  I'm just stuck in the calculation of time to determine whether or not the 15 minutes passed.
  
  What happens if they return to the site of the days or even weeks? My minutes of follow-up test has no meaning when entering hours and days or even weeks or months. Of course, my approach does NOT work.
  
  Any help would be great. Don't forget to Flash 8 pro and AS2 NOT AS3 or flash 9.
  
  
  Thank you

  I don't know how you look at the time, but if you create a DATE object:

  var today: Date = new Date(); It's actually an object of date and time.

  So, if you compare this date and time with an earlier date object and the object of time by using the Date method getTime() as follows

  Now.getTime () - previousDate.getTime () = the number of milliseconds that have elapsed between the "previousDate' and 'now '. If the difference is > 15 * 60 * 1000, 15 minutes.

• Comparing the first four digits

  Hello
  
  
  I need to compare two different tables say account numbers a and b
  
  
  
  I need to select the first four digits of the account number of 'b' and which correspond with the first four digits 'a'
  
  
  
  for example in b if I have the account number from - 1234
  
  I need to select all the account numbers from a starting with 1234 - like 1234567, 1234789etc.,.
  
  
  Please help me

  Hello

  Account numbers are really numbers and not the chains?
  If the two numbers have different lengths (e.g. 1234567 and 1234) do you always want to compare the first four digits?

  Assuming that the answers to both is "Yes":

  ...
  WHERE   SUBSTR (TO_CHAR (a.account_number), 1, 4) =
          SUBSTR (TO_CHAR (b.account_number), 1, 4)
  

  If the account_numbers are really chains, omit TO_CHAR.

• The numbers won't let me record time

  Hello

  I transferred my data from old iMac (mid-2010/Mavericks) numbers to a new (end 2015/El Capitan). In addition to the fact that I can't use the wonderful version of iWork and I'm stuck with a version with an annoying interface, numbers will not work correctly.

  I have a table to track the interactions I have with my students online. In a column, I record the time spent in particular student tutoring. Although the numbers transferred the old data to the new program, it won't let me enter the duration in. I can't copy and paste. And since I get paid according to time spent, it is a crucial column.

  How can I fix it?

  Thank you

  Kim

  Kim,

  It is always easier to help when you see what you see.  Use this link to help you post a screenshot.  It is safer to remove the personal information from the screenshots.  So duplicate sheet and change called a remove personal information:

  How to post a screenshot on the Apple Discussion Forums

  Explaining what happens when you type in a cell where you try to enter the hour.

• follow all the numbers listed entirely

  Hello

  in the column on the left side of the iTunes window where it shows for example that number piece is played in a particular selection, on my mac, not every number is registered. Before each issue was the show in its entirety, after that I must have clicked on something accidentally column now looks something like this:

  4271

  4272

  42...

  4274

  42...

  42...

  4277

  It seems to be no regular pattern, the numbers that appear entirely seem to be chosen at random. Another observation is that the column with the number does not have a position, even if I don't remember if that was the case before the problem arose.

  I tried to adjust the size of the column by dragging the column, open iTunes full screen and also removed some categories of view option to create more space for the numbers. Everything I tried had unsuccessfully, unfortunately, can someone point me in the right direction please?

  Thank you

  Someone else posted about it recently. I think there may be a way to adjust the font size in views or somewhere. Also report the problem to Apple:

  http://www.Apple.com/feedback/itunesapp.html