compare the screws

Similar Questions

• By comparing the screws

  Sometimes, I would compare the current VI to an earlier version. Comparison tools compares only memory screws and two screw in the memory cannot have the same name. So I save the current version as desktop:\temp.vi and then open the previous version of the CD.

  After the execution of tools > compare > screw compare and then close the screw outbuildings are fouled upward and then LabView and TestStand try to load screws of CD or complaining about dependencies.

  Is there a convention for renaming files and comparisons of VI running causing problems.

  Thank you

  JVH

  Check out http://digital.ni.com/public.nsf/allkb/3493C58EA0E842FA86256F86006142C0

  Down, he talks about it.

  By comparing the two screws of the same name

  You can compare the two screws of the same name, but these screws must reside in different LabVIEW projects, and you must open these screws of the project.

  "" Once you open the screw, select Tools "compare" compare screw to compare the two screws. Please refer to the beginning of this document for more information

• by comparing the average centroid location to the location of the center of gravity measured

  I'm using labview 2015 to design a laser alignment system, using a contoller ag - uc2 and an optical mount piezo driven two webcams. The establishment, is that the webcams are positioned behind the mirrors, which are somewhat permeable, so the webcam will get a shot where the laser beam is pointed. The laser must be aligned manually first, and after that it is satisfied with the alignment, this program will be run once to run in the background. control the position of the laser a few times per minute to correct the thermal drift. After it is first of all, I would like the program to take maybe 10-15 images, to find a location to center of medium severity on each of the mirrors, then switching to compare new images of this center of gravity of the model. My problem is that I can't imagine a way to get a picture of model and have that info Reports to the next iteration of the while loop to the overall program be carried out. I have tried using the structures of the case, which, I imagine, will eventually be the solution, but it did not work as expected. I put the case structure to run based on the value of the indicator loop iteration of the main loop, and I got a while loop in there with registries to raise the center of gravity of this loop and store this information for the next loop to shift. I can see after running the program why my implementation does not work, but I don't know how I can design something that will have an average of several images. I think I should use learn and compare the model, but I don't know how I can convert a cluster (centroid) type of data appropriate for the model comparistion live if you have any suggestions for my existing code or want to offer a different approach, I appreciate it. Also let me know if you need any other screws included.

  In the past, when I had to switch between two 'modes', if you do, I used two consecutive loops while, one for the first mode and one for the second, or I would put Boolean register to indicate that, two modes, the loop was offset.  If you start in a mode, and then more later switch to another once and only once, then you can use a node 'OR' like a lock to power the old way, so the first true feed you of keeps it true until the next time that you run the VI and it returns false.

  I would also add that I looked your VI and the method that you use on average 10 images, while innovating, is usually not a great plan.  Instead of having 10 shift registers build an array of fixed size, just have a table in a shift register, add each new measure at the end and the VI means in the range of mathematics/statistics to calculate the average.

• compare the mixed data clusters which include some floats

  Did someone come up with what they consider to be a slick way to compare groups of mixed (including floats) data for functional equality (close enough)? Are all I have manged to come with specific-the-cluster screws using a while loop with a case statement internal focus on the index to scroll the cluster element by element to make comparisons, using an appropriate method to compare the floats that can accept a tolerance.  I thought that maybe someone can already built a more generic solution based on clusters of variant data conversion and then direction each piece of data to a correct comparison for its data type.

  The attached Zip file has versions v7.1.1, v8.0 and v2014 my VI for this comparison. I need to rework the managed case RefNum objects to the fact that they will be digital or ASCII (e.g.: VISA). I also added an error output to make it easier to tell when the process runs off the rails. At this point, I'll say I'm done with this, because what I created, this is what I need to do and the elves of the forum NOR are harassing me to mark something on this topic as a response. Enjoy!

• By comparing the LabVIEW OOP class hierarchies

  Hi all

  The Question

  Does anyone know of a tool for comparing the hierarchies of LabVIEW classes?  (As 'Compare VI hierarchies' for .lvclass hiearchies?)

  For example

  Let's say I have foo.lvclass in both projects, and I want to compare the two instances, and their respective members.  One instance has methods that the other is not?  Is a method or differ from private data?

  Why?

  I have several applications with dozens of classes, which many must be interchangeable, and I want to quickly determine what classes are later, perhaps to consolidate some common code base.

  I thought about this announcement as a suggestion on the exchange of ideas, but I didn't know if I just don't see a feature that is already there.

  Thank you very much

  Jim

  Hi Jim,.

  It doesn't seem to be a way to do this. The nearest feature of you, that I could find was to use hierarchies of VI screw/compare compare to compare files .ctl for two classes. The LabVIEW help topic documents how to proceed:

  http://zone.NI.com/reference/en-XX/help/371361L-01/lvhowto/comparing_vis/

  However, this does not really reach the feature you're looking for. Thank you for posting this idea to the exchange of ideas!

• Screwdriver to remove the screws

  Hello, I have a MacBook Pro 13 inch (end of 2011). What kind of screwdriver to remove the screws correctly?

  Look at the screws.

  They resemble the Phillips head screw, Don't they?

  I guess that means you need a phillips head screwdriver.

• By comparing the numbers on MAC worksheet cell text

  How to compare the content of text in a cell in a column with the text content of each cell in another column to check for duplication. After checking the first cell, I won't move to the next and repeat the operation for each cell in the first column, ultimately comparing each cell in the first column with each in the second

  A simple way to do this would be something like this:

  

  The formula for C2, filled to the bottom of the column, is:

  = IF (COUNTIF (A, B) ", TRUE," "")

  The formula in D2, filled to the bottom is:

  = IF (COUNTIF(B,A), TRUE,"" ")

  This requires that you compare the contents of a cell in column B with all the contents of each cell in A and vice versa.

  If you want to see if the contents of a cell in column B is contained within the contents of the cells, etc., then a more complicated approach would be necessary.

  SG

• What formula would I use to add all the other ranks in my spreadsheet. I want to compare the fees and expenses of 2015 since they are incurred for 2016

  On the same worksheet, I want a spreadsheet to compare spending 2015 totals by month in several categories to 2016 expenses when they occur. What is the best way to implement this worksheet? It is essentially a budget, but wants to see how the category spending increase or decrease all the months for 2016.

  Thanks for any help.

  Hi Bruddah,

  I would like to start by rearranging your table so that the amounts from here to 2015 and 2016 switch not in the column, as implied in your question.

  Vocabulary of the numbers:

  worksheet not sentence numbers

  Worksheet: A spreadsheet. Usually abbreviated to 'Document '.

  Leaf: a blank canvas on which are placed the tables and other objects. A Document has at least one and maybe more than one.

  Table: an object consisting of one or more cells, arranged in rows and columns.

  Take a look at the personal Budget template (file > new form model...), specifically the summary in the table of categories.

  It uses the formula: = SUMIF (Transactions::Category, A2, Amount)

  Since you want to compare the volumes in several CATEGORIES at the specific two-year MONTH, you will need SUMIFS, using three test values, pairs of condition.

  Syntax: = SUMIFS (sum of the values,test values,condition,test values,condition,test values,condition)

  I would like to know if it is enough information. If this isn't the case, I'll be later in the day to enter more specific details. In the meantime, a screenshot of your table and the lines of (at least) your transactions table header would be probably useful.

  Kind regards

  Barry

• How to compare the 2 versions of the same document in Pages?

  How to compare the 2 versions of the same document on Pages?

  There is no OS X Visual tool which can open two Pages document and show the differences between them - other than the human eye.

  What information are you interested in identify as different between the two documents? What specific version of Pages?

• TestStand deployment error - error: unable to locate all the screws saved subVIs because it lacks a Subvi

  Hello

  I am a systems and software engineer based in Vancouver. I developed a test system automated using 2013 LabVIEW and TestStand 2013 with custom operator interface.
  I encountered problem 'lack screw' which is kind of weird because I went to analyze the sequence for the TestStand Deployment Utility and TestStand sequence editor > files broadcast tab.
  But when I tried to build the installer and reach the point ' called distribution screw, it always throws an error saying "an error occurred trying to read the error of the screw, possible because the screws are not saved in the latest version of LabVIEW. Do you want to save any changes now? ". I tried both (that is to say Yes and no) for this option, but it has not solved the problem.

  This is part of the original error message displayed in the TestStand deployment utility:
  " ***************************
  Then the treatment live...
  Error: Cannot locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.
  The chain of calls to missing screws:
  1 - ATE_AccelerometerTest.vi
  2 - CreateAndMergeErrors.vi (missing)
  3 - LogControl_CheckForErrorSendUpdates.vi (missing)"

  All screw missing come from userlib.

  Actions performed:
  -File of sequence analyzed by using the TestStand Deployment Utility and TestStand sequence editor
  -Checked "search directories" include all the necessary files/dependencies.
  -Mass to compile the directory of the missing screws
  -Added all the necessary files and folders in the workspace file.

  The result is always the same function according to the actions performed.

  Debugging last I did earlier, is that I tried to find the sequence and steps missing screws as shown above (for example ATE_AccelerometerTest.vi)
  and I discovered that the measure appears to be an empty action step. This would be possible even if it has already passed the analysis?

  Other considerations include:

  I'm using sp1 2013 LabVIEW and TestStand 2013. We tried the building three 3 computers and we only managed once to a freshly installed comptuer.

  Hoping to hear from you soon.

  Kind regards

  Michael Panganiban
  Engineering systems and software
  www.Synovus.ca
  [email protected]

  Hi all

  We were able to solve the problem. First of all to note is that the release notes in 2013 TestStand is obsolete and we confirmed engineer OR Austin TestStand 2013 works very well with LabVIEW 2013 SP1.

  Second, we played option deployment TestStand that solved the problem. Attached are the pictures.

  We have activated just the 'delete unused Components VI'. It could be one of the libraries (lvlib) we have included in the compilation, but we've not thought of it again because we have checked that all the screws are working. It could also be something else that I think is very hard to find from information. However, if someone had the same problem, this could be useful.

  Again, we return to using 2013 TestStand and LabVIEW 2013 SP1.

  I appreciate all comments and feedbacks. Otherwise, you can close this request for assistance.

  Thank you.

  Kind regards

  Michael Panganiban

  Engineering systems and software

• In comparing the two last samples read in

  Hey guys,.

  before the start of my program to test a sample, to check whether its current temperature stable

  So, I read the information of my sample temperature very low frequency (once every 5 seconds) and basically I want to compare the last two samples I have read, and if they are the same allow the next part of the program to start.

  I thought that this could involve using the Labview collector function, but I can't see how I would implement it.

  Any help is very appreciated,

  Sam.

  use a registry node or shift of feedback.

  Write the value to the entry of feedback node and compare to the output

• where are the screws of PID

  I can't understand how to install controls PID with Labview 2009.

  What part of the list of the products installation run to get these screws

  We have the full license of the site which is available to academic institutions, we should have it I think.

  The only computer I can find the screws on is an older computer that run labview 8.6 and vista.

  Yes, thank you.

  The problem I had turned that PID controls were on a different CD.

  We get a set of CDs for the licnese site, and this particular Toolkit has proved to be a red CD called "embedded control."

  Most of the toolboxes is on the 2 first major CDs with the basic software.

• Compare the voltage

  Hello.

  I created a VI in order to compare the measure. I start with a simple button.

  I want to replace the button with a myDAQ data. But read the data on sent myDAQ of data streams, and I need only one value? How to extract a value from the stream?

  Pascal

  Hi Pascal, see the attached VI (old version, but should open).

  Place your daq assistant as shown and see the results.

  Hope this is what you are looking for.

  Best regards, W

  P.S. I could not resist to show an alternative to the structure of your business

• How do you compare the data collected continuously?

  So, I'm stuck on the basic architecture, therefore, hoping that you can push took me.

  What I have is a VI that measures the tensions permanently, then, I have a flow of power from DAQ hardware data points.  What I WANT is to act on the data points of tension, only, which are larger than the previous points.  For example, I want to act on the first data point, since it will be the most important, since there is nothing to compare to, then I want to compare the points of data subsequent to the first, until there is a greater than the first data point.  Then, I want to compare tensions the NEW value more and so on, etc. and act only on the NEW larger value.

  Consider this list of data points and corresponding outcomes:

  2 LAW

  4 LAW

  3. DO NOTHING

  3. DO NOTHING

  4-DO NOTHING

  5 LAW

  4-DO NOTHING

  5-DO NOTHING

  4-DO NOTHING

  3. DO NOTHING

  6 LAW

  I've been watch combinations of them for WHILE loops and shift registers and the tables, but the table would get so huge so fast and the MIN/MAX value of the TABLE palette function would get pretty slow and I don't need to evaluate all previous data.  I just need to be able to identify the highest value and then compare it to the following values until there is a NEW larger value.  It's a bit like how the warriors would fight several opponents until they lost and then, there's a new champion, and all subsequent warriors are compared to the new champion and so on and so forth.

  You have any suggestions on how to achieve this?  I'm puzzled.

  Thank you

  Dave

  Yes, either case will work, I put it in the structure case just to show that you need to put in there if you want to use.

• Compare the table and out of the common elements

  Hello

  Can you help me to compare the two tables in the attached file in VI and out the elements common to the two tables?

  Thank you

  hiNi

  There is no wire table through the False State in the structure of your business.  Use the default value if unwired is selected for this tunnel. the default value for this tunnel is an array of empty strings.  Run the wire straight through, and Bob's your father's brother.