Screwdriver to remove the screws

Similar Questions

• Anyone know how to remove the screw on a Probook 4520 s?

  Covers are on the sides right and rear left.  I try to add more memory and can't get them off so I can remove the screws.  Thanks in advance.

  They are under the main panel.

  http://h20574.www2.HP.com/results.htm?SID=4145198&MEID=B242B1B5-9290-42B7-87F1-0F1A21FE9DF8

  Give time to the media library to load and use IE8, IE9 does not work. You must also reconnect.

  Go to "Memory card" in the left column.

• What screwdriver to remove the cover from the fan on satellite p10

  I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

  Hello

  Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

  My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

  Good bye

• HP ENVY 17 t-k000: how to remove the screw stripped of the HP ENVY 17 t-k000?

  Hi guys,.

  I bought an ssd drive and I want to go from the old hard drive to a 2nd caddy. But first I must solve a problem.
  One of the large head of the optical drive Bay Phillips screws that attach the top to the rigid base cover. He stripped and I can't remove it.

  

  Kind regards

  Alex

  alxvieira wrote:

  Hi guys,.

  I bought an ssd drive and I want to go from the old hard drive to a 2nd caddy. But first I must solve a problem.
  One of the large head of the optical drive Bay Phillips screws that attach the top to the rigid base cover. He stripped and I can't remove it.

  Kind regards

  Alex

  Well, it means you will have to drill out or take a shop in order to drill and remove it. There is not much can do when you strip a head that small of a screw.

• ENVY 15 laptop t: remove the back of the laptop (aluminum housing) ENVY

  I am wanting to add an SSD 2.5 "to my computer laptop but how do you get the back without damaging the metal case?

  Remove the finished background by being simple (once you know the method.)  Remove the screws exposed by using the screwdriver "Star".  Under the rear rubber mat, there are additional screws to remove.

  Second added SSD drive Bay 2.5 ".  This required HP special drive cable and disc support/support.  (Edit: make sure you use spares list online and not with the computer which have been exceeded and a previous generation unit documents.)

  Additional disk is used for the user files main SSD is for programs.

• Z500 windows touch 8 - cannot remove the CD/DVD drive

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  Jocks123 wrote:

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  First make sure that there is no disc in the dvd/cd drive. Then remove the single screw shown in step 2 in the image. To remove the drive, you can either push with a screwdriver as shown in step 2 (if iti is you push hard with the screwdriver and help pulling the device at the same time) or you can gently pull the optical unit, as shown in step 3.

  

• Cannot remove the keyboard on Satellite Pro U400

  I need to change the connector of the screen on my laptop, HARD drive already deleted, memories, WEIRD, all the screws F2, F5, F8 and the keyboard plate is still stuck in the Middle, can not remove the motherboard.
  Advice, please, all that is yet to shake the plate of motherboard?

  Thanks in advance

  Hello

  Before starting to remove the screws that attach the keyboard (two of them upstairs) remove the support KB. They are placed under the battery.
  Check it out.

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• Ho do I remove the screen of my Equium U400?

  My Equium U400 requires withdrawal of screen I need to replace the broken Ribbon. I can get the frame surrounding the loose screen, but the lower part of the image seems to stick because of the hinges. I tried to remove the screws on the underside of the laptop under the hinges, it seems to loosen their but the screen won't come easily away. I don't want to force and breaking so thought I would ask some advice.

  Any ideas?

  Hi mate

  Disassembly of the laptop is always delicate _and if you have no experience, you should ask someone for assistance. _

  On the pages of Toshiba, you will find not all manuals that might be useful to disassemble the laptop, it seems that these manuals are not for public use, but only for the people of the ASP.

  You will need to look in the internet for useful pages.
  I found a page irisvista.com there are many images useful and instructions

  Good luck

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• Remove the drive DVD/CD-RW in Satellite Pro A120

  Can someone help me remove the DVD/CD-RW of this laptop?
  I already folded the bezel on the original disk, which I am trying to remove to replace it with a DVD - RW drive.
  I removed the screw - (reported by F6 on the plastic box - which seems to be the one & only) & the drive didn't budge. It seems a bit at loose in the case of the laptop but do not pull. Is there another screw or a clip that I'm missing?
  I got a scheme by a person I am in contact with, but it's no help. I don't want to just pull hard & break the drive excising & the laptop as well.

  Thank you.

  Hello

  I guess under the keyboard is a type of switch that needs to be released and turn off the STRANGE out of the slot. A120 is a new unit and I hope you know withdrawal of the keyboard, you can void the warranty.

  Think about it!

• Remove the top of Satellite 1100 / keyboard cover

  Hi, I have a 100 satellite that I need to remove the top cover to get to the hard drive. I removed all the screws on the back and when I try to remove the lid seems stuck near the keyboard just above where is the mouse glidpath. Anyone has any idea how I would remove the cover completely to get hard disk?
  Thank you very much...

  Dear Neil

  Trust me on this device it's very complicated to do. If you want to remove the HARD drive, you should separate the top cover (after removing the keyboard).

  -In the bottom corner, there are 10 screws that must be removed.
  -When the keyboard is removed there are six screws which fix the top cover
  -Disconnect the touchpad
  -Lift the top cover by pulling gently upward from the rear corners and release locks on the front
  -If I remember correctly the HARD disk is fixed with a screw
  -After removing the screws, pull forward on the HARD drive to the connector on the system board

  If you are not familiar with the assembly/disassembly procedure please don t do it yourself.

  Sorry if my explanation is not accurate enough, but on this path, it is not easy to explain each step of manipulation.

  Good bye

• Equium A200 - how to remove the display?

  Hello.

  I need to remove the screen on my Equium A200 but there seems to be no screws to enter.
  None of the guides I found works for this model.

  No one knows how to do?

  Thank you
  Dan

  Hello

  Disassembly of the laptop is not really easy it s really complicated.
  If you have no experience so you should not do this, you may damage other parts

  But as far as I know to remove the keyboard and the top cover Assembly.
  Then you can remove the four screws under the rubber covers. This allows you to remove the LCD screen bezel.
  New measures, you will need to remove the screws from the display hinges.

  As I mentioned above; It's not so easy and be careful if you would remove anything

• Removing the disc HARD on TecraA10-112

  I have a Tecra A4 with XP Business. I am able to replace the HARD disk drive by unscrewing a plate under the laptop and in Exchange the HARD drive.

  Also, I have a Tecra A10-112 with Vista business and would like to buy a new HARD drive can I install Windows 7 on when it will be available in October.

  However trying to unscrew the plate on the A10, I couldn't remove the plate - screw unscrewed, but the plate wasn't - there seems to be a silver 'trick' on the plate which can be the cause of the problem.

  HOW can I REMOVE from THE PLATE

  A I can't find what is the HARD drive, so I can buy a new for Windows 7
  B I can exchange as I can with the A4

  Hello

  I can understand that you are not satisfied with the response from Toshiba, but you must understand why they send content. On Toshiba laptops, by a hardware upgrade can be done by the owner of the laptop and other authorized personal only.
  As you can see HARD drive upgrade or replacement must be carried out by technicians.

  For example: you try to replace the HARD drive and damage your laptop HARD drive connectors.
  So what you can do to solve this problem? Who should be responsible for this and, at least, who should pay for the repair?

  In the end, I must say that you can do with your laptop you have and if Exchange you it to HDD please do the following:

  1. remove the screws fixing the HARD drive cover
  2. Insert your finger into the slot and lift the cover of the HARD drive to remove
  3. remove the HDD from the slot and disconnect the HARD drive harness connector. (if the connector is located on the left moves the HARD disk to the right)
  4. remove the screws and separate the HARD drive and disk HARD holder

  Take care to not press on top or bottom of a HARD drive. Pressure can cause data loss or damage to the unit. Please note that you do this at your own risk.

  If you have any questions on Win7 let me know.

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you