compare the text file to test the system

Similar Questions

• Digital loading data from text file for Test of numerical limit

  I am a new user of TestStand 2014.  Just downloaded the demo ran successfully the computer.dll tutorial & example "loading limits a File.seq text"; & is now trying to build my own sequence from scratch.  I want to load a number from a text file using the property Loader.  The file contains the following:

  GGbeg
  484
  GGend

  My hand sequence contains 2 markets (see attachment):

  Charger property (which reads the text file & must store the number 484 in the Step.Result.Numeric variable, right?)

  GG-digital-test (which should test the number 484 in Step.Result.Numeric as a Data Source, right?)

  But when I run it, the measure indicates "0" for the value instead of "484".  What I am doing wrong?  Thank you in advance for your help!

  George

  Hi George,.

  The text file must be in the format, includes no property magazine. Use the following in the text file to make it work:

  GGbeg
  Result.Numeric
  GG-digital-test 484

  Value of the variable

  Value of the variable

  Value of the variable
  GGend

  In the Tools menu of the sequence editor, there are some 'Properties Export/Import' tool, which helps to create text files to be used with charger property stage. I highly recommend to create the new file using the tool and then edit the file to change the values.

  -Shashidhar

• Compare 2 text files data and output match

  Hi all

  I need some advice.

  First of all, in BinaryCode.txt data are thus:

  Replace BinaryCode0 1 0 0 0 0 0 0 0 0
  Replace 1 0 0 0 0 0 0 0 1 BinaryCode0
  Replace 1 1 1 0 1 1 1 1 1 BinaryCode1
  Replace BinaryCode1 1 0 0 0 0 0 0 0 0

  the first line of the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1) appear in the Timed_Sets.txt file.

  Timed_Sets.txt data as such:

  BinaryCode0, 6, 40...
  BinaryCode0, 7: 40...
  BCName1, 0, 20...

  BCName1, 1, 20...

  For example, as BinaryCode0 is a match that I pulled out the line whole Timed_Set.txt in another table.

  I worked on a program, but I do not get the expected results.

  Text files and VI are attached.

  I appreciate your kind assistance in this matter.

  Thank you

  Concerning

  Kart

  If I understand what the output should be so what you essentially have to do is walk through the column for each unique value and BinaryCode.txt, pull the corresponding lines of Timed_Sets.txt. There are a variety of ways to do this, depending on the amount of data you have and whether or not you can use any kind of prior knowledge as to the actual content of the file (for example names of key search). It's a joint way. Modify if needed.

• Why can't the system find/open executable a text file when run in labview?

  The executable system works perfectly when it is in the folder. He is able to open the text file.

  When the executable is launched through LabView, it returns however it cannot open the text file.

  Is this a problem that I can fix it or what I need to find another way to enter data?

  Thank you.

  Wire you the entry 'working directory'?

  Can you show us a code?

• the system cannot find the message text for message number 0 x in the message file

  Hello

  I use the MKLINK command to share a public directory in my file server for all organizational units.
  After I set the NTFS permissions on the server, I can open directories related to all the directories of the OU but in client windows XP to return this error window:

  "The system is not message text for message number 0 x in the messages for \\Filesrv2\IT\Public file.

  Thank you for your time

  Hi Babak,

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Why the FF fix the links click on a text file, but IE10 works fine?

  I'm composing a text file LibreOffice prepare for the publication of an e-book. In this text I incorporated hyperlinks to locations on the map Icelanders for the development system. I replaced these links with Google URL shortener for easy management and use.

  When I test the links with FF as the default browser on this laptop under Win8/64, FF tries to open the pages of the card but stalls with no image displayed. In IE10, however, they work very well. These links also work on FF or IE on Windows 7/64 on my desktop.

  In addition, when I click on the same link listed in my account Google shortened the list of URLS, it works in both FF and IE on this same laptop - only when the user clicks on the link in the doc file. fact FF fail to open the page target card. This is the case if the OL WRITE option 'Ctrl + click' or simply 'click' is specified.

  Doc file: LibreOffice 4.1.x with hyperlinks embedded URL "googleized", usually a clickable link to graphic character after the place agreed.

  Target Web site: http://atlas.lmi.is/kortasja_en/ zoom to specific locations.

  Note that the http://atlas.lmi.is/kortasja_en/ page is a Flash object, so check the address bar to see if there is an icon to the left of the address bar on the blocking of the version of the Flash plugin.

• At the beginning of the edit Text file

  Hello world

  I own a MacBook Pro in early 2011, the processor 2.3 Ghz Intel Core i5, 4 GB 1333 MHz DDR3 and Intel HD Graphics 3000 384. My hard drive is a Samsung SSD Pro 2012 series and I used it without a problem until a month ago or more. My Mac running OS X El Capitan v. 10.11.1. Due to frequent crashes with all software, I decided to restore the entire operating system with a previous backup. I've done this before almost 5 times in those years there. After that, well except for a message displayed by textedit

  

  It is displayed whenever I turn on my Mac. How can I permanently remove this annoying message?

  In the past, I had a similar problem that I solved thanks to the previous questions in this community, but now there is none.

  I ' v tried to run the AHT Test by pressing the "D" command before the gray screen at the beginning, but nothing happened.

  Any other ideas?

  More than likely this text file is in your startup items. Look in the preferences system-> users and groups-> login items.

• AprΦs the dΘmarrage, the text file named Guadeloupe is open. Any ideas on what this is?

  AprΦs the dΘmarrage of battery empty, a text file named Guadeloupe (which I didn't create) with a single (visible) line of the text with some strange characters is open along with other programs that start at startup. Now, I tried to locate the source of this file without success - it's as if the file does not exist. I did not always have this problem (or event) arrive, and I didn't know of any other cases when searching online.

  Any help or information will be greatly appreciated.

  I'm on an Early 2011 Macbook Pro 13 inches, 2.3 GHz, 8 GB ram i5 upgraded, under OS X 10.10.5.

  One of your connection objects may be causing the problem. Please select the login items tab in the users pane and groups of system preferences. Remove all items that you do not recognize. If you don't know which ones to delete, double-click on each to test.

  If a connection item is dimmed and cannot be deleted, click on the padlock icon in the lower left corner of the window and enter your login password when you are prompted. Then try again.

  To avoid confusion, please note that checking or unchecking the box next to a point of idle connection not she. You must remove the item from the list.

• Control the Structure of the event with text file

  I'm new relativaly in LabVIEW (experience only about 2 weeks). I am currently control a stepper motor using a structure of the event. Similar to the sample code given by LIFA, I entered my settings how the engine not move away, then press a button on the windows before, and it works this way. I also have other equipment that works as well in LabVIEW, as a transnational step; all components operate individually.

  Now, I'm trying to make the more automated system and to ensure that all the different equipment work in the same code. So, I tried to implement a structure of the event using a text as an input file to try to control events. The text file has a table 1 d of numbers going down vertically (only the line numbers change). So, I used a table of index function to take the numbers one by one, use a loop (while loop in this example) to go to the bottom of the column of numbers. However, the event not register the change, even if the indicator shows the value is changing.

  Attached, it's my test code and the text file that I use to try to control the structure of the event. Please let me know what I am doing wrong. Thank you.

  Oh, now I understand what you tried to say. I'm using a loop and a case structure to activate different events with the entries in the table. I thought case structures and event were the same, but you taught me the event structures are used just for the façade stuff. Thank you all!

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• Urgent... a file in the system registry is corrupt... Windows will not start

  Hello

  It's George who has just encountered a problem with my Sony Vaio laptop last night. My priority is to find the superior application test which is located in the desktop of the computer.

  The computer has had problems with a google redirect virus which all the analysis programs antivirus could not detect, and last night, the computer stops after a power failure and was not able to start the windows program.

  The computer will start, but he's going to ask me directly with a message to choose three operating systems which is the Recovery Console, "not to select this [active debugger], and Windows xp home edition.

  Nothing in the menu advanced options of windows would work even safe mode. I was fooling around in the recovery mode, and I have reason to believe that the system registry is corrupted for windows.

  I have trie offered to the http://support.microsoft.com/default.aspx?scid=kb;en-us;30754 method

  How do I recover from a corrupted registry that prevents Windows XP startup

  This article was previously published under Q307545

  , but I don't have a windows boot cd, so I couldn't continue.

  I'm looking for more help from the world wide web.

  My superior applications are due within a week and help would be greatly appreciated.

  Thank you for your time

  sincerely

  George

  If you want to, you can also do another type of bootable CD, and usually, you will be able to simply copy your important files on a USB key, and then on another system.

  Here's an idea:

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.org/download.html

  On the left, click on download, scroll down, choose the most recent version the download link is a little hard to see and they sometimes change the location of the download link, then you might have to look around her.  Today, it is at the bottom of the page, above the drop for older versions and looks like this:

  Hirens.BootCD.13.0.zip

  Beware of the other links on the page to other types of downloads for other types of CD - be sure that eventually you will download the latest version which is now a file called:

  Hirens.BootCD.13.0.zip

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• FRM-93535 the system cannot find the specified file

  Hello world

  Once we have installed WL 12 c, we try to launch text.fmx form to test the object, we have the following error:

  FRM-93535 cannot create process.unable run time to run the start command.

  in formsapp - diagnostic.log, we found the following entry:

  [2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [name of the partition: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run start frmweb webfile = HTTP-0, default command

  [2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [partition name: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start []

  java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 2 CreateProcess, the system cannot find the file specified

  at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048)

  at java.lang.Runtime.exec(Runtime.java:620)

  at java.lang.Runtime.exec(Runtime.java:450)

  at oracle.forms.servlet.RunformProcess.startProcess (unknown Source)

  to oracle.forms.servlet.RunformProcess. < init >(Unknown Source)

  to oracle.forms.servlet.RunformSession. < init >(Unknown Source)

  at oracle.forms.servlet.RunformSession.get (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.getRunformSession (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.getInfo (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.doGet (unknown Source)

  to oracle.forms.servlet.ListenerServlet$ Request.access$ 100 (unknown Source)

  at oracle.forms.servlet.ListenerServlet.doGet (unknown Source)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:687)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:286)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:260)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:137)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:350)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:141)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:649)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:124)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:232)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:94)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:224)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3654)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3620)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:326)

  at weblogic.security.service.SecurityManager.runAsForUserCode(SecurityManager.java:196)

  at weblogic.servlet.provider.WlsSecurityProvider.runAsForUserCode(WlsSecurityProvider.java:203)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:71)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2423)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2280)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2258)

  at weblogic.servlet.internal.ServletRequestImpl.runInternal(ServletRequestImpl.java:1626)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1586)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:270)

  at weblogic.invocation.ComponentInvocationContextManager._runAs(ComponentInvocationContextManager.java:348)

  at weblogic.invocation.ComponentInvocationContextManager.runAs(ComponentInvocationContextManager.java:333)

  at weblogic.work.LivePartitionUtility.doRunWorkUnderContext(LivePartitionUtility.java:54)

  at weblogic.work.PartitionUtility.runWorkUnderContext(PartitionUtility.java:41)

  at weblogic.work.SelfTuningWorkManagerImpl.runWorkUnderContext(SelfTuningWorkManagerImpl.java:617)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:397)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:346)

  Caused by: java.io.IOException: CreateProcess = 2 error, the system cannot find the file specified

  at java.lang.ProcessImpl.create (Native Method)

  to java.lang.ProcessImpl. < init > (ProcessImpl.java:386)

  at java.lang.ProcessImpl.start(ProcessImpl.java:137)

  at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)

  ... more than 48

  ]]

  Please advice

  I have reinstall for weblogic and form of the components, I followed the steps you provided for me and eventually I was able to run the application before I faced the following error: ]] [2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 106] [username: ] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run frmweb webfile = HTTP-0, the default startup command [2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 106] [username: ] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start [] java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 14001 CreateProcess, the application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048) According to Microsoft error setting: Error message: "side-by-side configuration is incorrect." The machine is missing the correct C++ runtime components for your system type. (x 86 or x 64). Installation of the next update solved the problem. Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) I did the installation of the c library ++ and all ok thing.

• Is there a way to open the text files with arbitrary extensions?

  As part of the mobile platform iOS, is possible to open arbitrary text files that have an arbitrary extension?  For example, in the course of my work day, I meet regularly with plain text files that have an .out extension.  I'd love to be able to open these simply with iOS notes without renaming them in .txt.  I meet many of them and only need to do this for a few minutes, so take the time to rename them significantly adds both.

  On the desktop a BONE can generally "open with", then choose the application.   I'm looking for the equivalent in iOS.  Please note that to access the files on iOS is not a problem with icloud drive, dropbox, etc..  they just can not be opened easily.   Simple text editor, word processor not full blown.

  You will need a software that can handle the file.

  Usually the file management applications can manage any type of file.  I like the 5 Documents to Readdle, it can open almost anything.

  https://iTunes.Apple.com/us/app/documents-5-file-system-PDF/id364901807?Mt=8

  The equivalent of 'Open with' in the iOS is "open in", 'Share xxx' or even 'Copy To '.

  How to get to it, depends on where the file is located.

  ICloud drive for example, you can do open the file in a specific application by holding your finger on the icon of the file and by selecting more «...» "in the menu that appears, and then selecting"Share point... ". "and finally select an application from the list.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return