cannot start windows or restore/recovery

Similar Questions

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Cannot start windows after update

  After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

  Hi, MooreTM,

  Brand and model of your computer, please.  Thank you.

  (1) you are able to start safe mode and do a system restore?

  Start the computer

  Start typing F8

  Select Mode safe mode with networking

  What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

  Select a date and time before the Windows update that caused the problem

  (2) start Windows and tapping F11 key

  If the Advanced Options screen, select fix my computer

  Press enter

  I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

• cannot install downloads/impossible restore/recovery

  cannot install downloads/impossible restoration/recovery running IE9/windows 7 have dell inspiron 560 need help / * address email is removed from the privacy *

  Hi Poohwho,

  1. downloads are you trying to install?
  2. what you trying to restore/recovery?
  3. What is the accurate and complete error message when you try to install the downloads/restore/recovery?
  4. don't you make changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link for issues related to installation.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Method 2
  For problems with the restoration, I suggest you to see the following link:

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot start Windows RT and Reset failed (ASUS Vivotab RT)

  Hello

  I have an ASUS Vivotab RT, which cannot start Windows.

  AutoCorrect has failed, Windows/System32/LogFiles/Srt/SrtTrail.txt said each test pass, and root cause is "cannot determine the cause of the problem.

  I tried Refresh/Reset to solve problems, but they all said there is a problem and will not go forward.

  I have download a boot recovery zip someone share online (contains / Boot /sources etc., install included.) WIM), format a Fat32 drive and extract all the files, it starts (power + volume down), but after selecting the language-> troubleshooting-> reset/refresh, it's always "there is a problem".

  In addition:

  I tried bootrec /RebuildBcd, it shows the 0 found instillation. (Although my C: / he windows of course folder).

  I assigned letter of recovery in the form R, run chkdsk/f r: chkdsk C: F, no problems found.

  DiskPart:

  Volume 0 - Windows 25G

  Volume 1-300M

  Volume 2 - system-100 M

  Volume 3 - 4096M recovery Image

  ASUS support site does not help much, and it is out of warranty.

  Thank you.

  Hello

  Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance. Please visit the link below to contact ASUS support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Since you mentioned that you can view help her out screen in your ASUS RT enrich your life, you can try the steps mentioned in the link of ASUS support below and try to reset the factory setting tab.

  http://www.ASUS.com/support/knowledge-detail/28/5/ASUS_VivoTab_RT/312D2BB3-C6EC-40F0-AFE8-90F6A0622386/

  Note: once the RESET has been performed, all data, applications, settings and personal information will be deleted after initialization.

  I'm really sorry not to be useful in this regard.

  Please do not hesitate to contact us for any further assistance on Windows.

• Acer aspier L5100 cannot start windows

  Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

  Blue screen, status of the Boot Manager Oxc000000f

  required unit is not available.

  I don't have the drive to victory, what to do now?

  Advice from someone...

  probably corrupted file BCD.

  What is your operating system?

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Get error 0x800106ba and cannot start Windows Defender

  Cannot start windows defender after installing Miicrosoft Security Essentials

  MSE disables Windows Defender from Vista:

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• Cannot start windows, impossible to reinstall windows, can't restore windows to the external hard drive or to an earlier point in time!

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  Hey joeccash

  If you can not restore system reinstall windows etc you may have a hardware problem

  see if you can press F12 on startup to run dell diagnostics tools

  information on the dell below link

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  and below dell link has the factory recovery information

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If this does not help, try dell or a reputable computer repair persom

  Walter, the time zone traveller

• G560 cannot start Windows 7 after onekey recovery

  I got the Lenovo G 560 0679 (2.54 Ghz, 4 GB Ram, DVD, Win 7 64 bit) * do not know the full product code * and created recovery disks. During the process, the system wanted 3 disks. After the second disc, the recovery disks have already been created. It was a little suspect. I tried the recovery disks. Then I have to restart the system. If I start it says that windows could not be started due to a change in hardware or software.

  I will go into an installation disc that has not been included in the box.

  Well below I got the offer to choose between

  Start windows normally

  use the last working configuration

  saving mode

  Save the network mode

  Save the mode prompt

  I also tried to install a Win 7 Home 64 bit edition on the main partition. Subsequently, I installed onekey recovery and tried to restore with the partition of lenovo. It did not work either.

  Can someone help me?

  Thanks for you advice.

  did you already changes on the software?
  Remove if inserted usb devices all.

  any other error instead of "change in hardware or software?
  I don't know if it will help but try to set the bios default settings (when you see the lenovo logo, press f2)