Compatibility issue with FireFox 8 password manager

Password Manager works with FF8? Other users have tried - and have problems (same as for FF6). Is there anyone who has updated to FF8 - and password manager works fine?

There is a solution, see here

I tried and it works.

Tags: Lenovo Products

Similar Questions

  • Compatibility issue with IE 9

    I get the following error message after installing ie 9 and try to run VMware Service manager 8

    "Session error".
    Your session has expired or has been terminated by another officer sign in with your ID and password.

    Please sign in using your infraEnterprise URL. »

    is attached the screenshot of the error message

    However, VMware Service manager 8 opens and works with ie 8, then is there a compatibility issue with ie 9 or is there something that needs to be changed in order to make it work with ie 9?

    Note: I am running with the patch 43

    Like I said not released PR mentions IE 9 Support (including RP48, Gytis thanks for the ReadMe file).

    I triedRP48 with the versions of IE 9 (32 and 64-bit) on a 64-bit Windows 7 workstation but get the same errors:

    Session error
    Your session has expired or has been terminated by another officer sign in with your ID and password.

    Please login using your URL infraEnterprise

  • Anyone know of any compatibility issues with Windows 8 and RV series routers?

    I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

    On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

    I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

    If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

    The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

    Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

    Hi Gregg,

    NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

    If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

    This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

    -Tom
    Please mark replied messages useful

  • Is it possible to record "Mozilla Persona" - password with the FF password manager?

    Is it possible to record "Mozilla Persona" - password with the FF password manager?
    Thank you
    pollti

    Persona.org or login.persona.org is present in your Exceptions list?

  • I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    Right-click on the setup.exe > run as admin.

    See you soon. Mick Murphy - Microsoft partner

  • English CC only version: compatibility issues with Windows 7 in Italian?

    Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

    Francesco

    Resolved:

    I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

    Thank you, bye

  • How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    It is hopelessly outdated. It is simply not compatible.

    Mylenium

  • Accelerated release of Firefox calendar is at the origin of the compatibility issues with our intranet applications - where can I find the terms of this annex, including the end of support dates?

    We are a University use an updated internal development of e-Learning applications which makes use of a framework rich client (ZK - www.zkoss.org). For reasons of compatibility with this application, as well as other general factors, we have standardized on FF 3.6 browser for all our desktop computers. Normally, we will review our browser selection once a year and make the changes/updates to compatibility level for 3 rd-party libraries we use and our own code, in order to address new developments in the browser market.

    However the FF of the new policy of difficult liberation our lives check. FF 6 came out just months after 5 FF. We perform an upgrade, we have to do a systematic series of tests, settings, changes etc. regression tests. The cost is not possible for us to do this every 3 months! So please can anyone point us to a clear release plan for FF that shows, for each version:

    a. Release date
b. End-of-support date
c. Release notes
d. Compatibility in terms of HTML and Javascript/ECMAScript versions.

    https://wiki.Mozilla.org/RapidRelease/calendar

    https://wiki.Mozilla.org/releases

    New versions are will be released every 6 weeks, so until Mozilla announced they will do than support for a LTS version for business 'customers', you guys left to swing in the breeze as well as to be able to plan for the future with Firefox. I think that as long as the said decision is taken, support for Firefox 3.6 versions will continue. A 3.6.22 release is under development right now, probably for immediate release next week.

    As far as the end of support dates, as each new version is the version support ends for the previous version, with the exception of 3.6.x. currently Firefox 3.6.x and 6.0.x are the only versions that receive security updates. Firefox 4.0 and 5.0 is not 'supported' any longer.

  • Firefox for Android blocks on the hard disk of fire turn on one or two seconds after the start. Is there a compatibility issue with the Kindle fire HD?

    Load the latest version of Firefox for Android on the Kindle Fire HD & Installed. The program completed the installation process, but as soon as Firefox is started in a few seconds the program stops.

    Is there a problem with Firefox and Kindle Fire HD?

    I don't want to use Chrome and the browser of silk Kindle is not very good. I have Firefox on all my machines (desktop, computers cell phones, Android phone, 2 and (hopefully) Kindle) and want to be able to synchronize my favorites, etc. between each one for a consistent use.

    There is only an apk at this link. He is currently the fennec - 20.0 6 .multi .android b - arm.apk

  • compatibility issues with WRT610N and WMP300N security mode

    Greetings from the experts out there. I have adsl AM300 + WRT610N pulled upward at home my receiving office on WMP300N wireless broadcasting (only 2.4 GHz wireless signal that I have disabled 5.0 GHz for troubleshooting). Get the best connection with the configuration below (WEP without authentication). I tested with WPA, WPA2, WEP with shared authentication. All these 3 combinations security mode does not allow my office to connect to my WRT610N router, which leads me to assume that there might be a problem with a pilot of the aircraft. The only link that almost succeeded was with WPA2 because I managed to get the LAN connected but not being is not able to connect to internet via AM300 so I have concluded that it is another problem too.

    AM300

    Software version: 1.19.04

    ===================================

    WRT610N-SG
    Firmware version: 1.00.00 B17
    ===================================
    Security mode: WEP
    Encryption: 104 / 128-bit (26hex)
    TX key: 1
    Authentication type: Auto

    WMP300N
    Driver version: 4.150.22.0 6/21/2007
    ===================================
    Security type: no authentication (Open)
    Encryption type: WEP
    Key index: 1

    (1) are you able to get a good market condition the Internet connection, using a computer that is connected to the WRT610N?

    (2) are you able to get a good market condition the Internet connection, using a computer which is connected wireless to the WRT610N, when no encryption is used?

    If the answer 1 and 2 is Yes, then:

    First of all, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

    In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use.  Delete your current network (this will remove all old settings.)  Restart the computer.  Return to "Preferred networks" and re-enter your current info from the network (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.  Restart the computer.  The computer should automatically connect to your router (this may take up to 2 minutes).  If you're still having problems, temporarily disable your software firewall computer, then try again.

    Note: For WEP, enter 'key WEP 1' (found in the router) in your computer, not the WEP password or passphrase.

    If the above does not solve your problem, download and install the latest driver for your computer's wireless network adapter.

  • Having major compatibility issues with Adobe, Mac Yosemite and Wacom Cintiq programs companion hybrid.

    Since I upgraded my Mac iOS Yosemite, my Adobe CS6 programs do not work well at all. They start very well, but the menu windows acting weird, often forcing me by dint leave whenever I try to do something. I downloaded programs CC trials and some may work better for me, but most have similar problems when I try to use on the Wacom. I'll explain my setup, and exactly what is happening...

    I own an iMac end 2012 model (the one without the cd player) and a Wacom Cintiq hybrid companion that I use as a secondary display design. The screen Wacom is under my iMac in the settings screen, since my Wacom rest below the iMac screen. Think Nintendo DS... like how the lower screen is touch screen... same deal here.

    When I open Photoshop CS6, CS6 Illustrator or even Illustrator CC and move them on my Wacom screen, the 'new' window is aligned with the top of the screen, cutting off buttons and options I need. I can't reposition the window because the upper part is necessary to move it. In the case of the window 'opens', it does not at all appear, but it blocks my program. It is as if he wants me to cancel the open window, but the window is not on any screen. That's when I have to force quit. I also noticed that sometimes it seems you have a 3rd office every time I enter the mission control afterwards. I have no idea why this is so.

    The only option that I know to get around these problems is to put my screen on the mirror and mirror of the iMac screen mode, but not only I have to go into settings and recalibrate my pen, whenever I want to use these programs, but it's a major drawback when I fight for space on my screen since I was only 1 working with this mode. And just to be clear that CC Photoshop works perfectly for me. No compatibility issues he Fortunately, but if it works well with my setup, then why don't the others. Worse yet, I don't know who is at fault... What is an Adobe problem, a problem of Yosemite or a problem of Wacom... I do not know.

    Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

    -solution https://forums.adobe.com/thread/1689788 of a person

    -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

    -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

  • Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

    Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

    I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

    Did you download and install the special version of CS2?  It's the only one, you will be able to use.

    Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Photoshop Elements 4.0 compatibility issues with Vista

    How to solve compatibility issues when Photoshop Elements 4.0 with Vista operating system loading. The software provided with the scanner Canon Canoscan 8600F.

    Nope, I'm afraid that this is going to work on. The best you can hope for is looking for patterns of compatibility, but otehrwise I don't think there is a way to run this software 7 or 8 year on Vista or Win7 / Win8 also...

    Mylenium

  • Compatibility issue with DVD Maker and Windows Media Player

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
    A month ago, I did 2 DVD with images and music. Here's what I did...
    Open Windows Movie Maker...
    1. I imported images in the timeline.
    2. I imported the music (wma in your case) file to Audio column / music.
    3. I have synced it so that the images and the music would start and end at the same time.
    Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
    4. I clicked on publish on DVD.
    Windows DVD Maker wil pop up. You know the rest of the steps.

    t-4-2

  • HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

    My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

    HI JourneysLady,

    I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

    --------------------------------------------------------------------------------------------------------------------------

    Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    Although I am an employee of HP, I speak for me.

    ---------------------------------------------------------------------------------------------------------------------------

Maybe you are looking for