Compatibility issues between Captivate 8 and 9?

Similar Questions

• "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows."

  Original title: "hp pavillion needs of troubleshooting"

  Printers and file devices it says my computer needs troubleshooting and this is the message I get after a repair...

  "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows." The system in the Away Mode is only compatible with 32-bit versions of Windows. This problem is not critical, but you can avoid it again by turning off the system Away Mode in the BIOS of your computer. Refer to the instructions provided with your computer that explain how to access the BIOS and disable the Mode system Away. »

  Where can I find instructions on disabling the system Away Mode?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your model number >, read the instructions.

  Or contact HP direct:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• CC of Photoshop runs very slowly on my new Dell Inspiron 7000. Is there a compatibility issue between the CC of Photoshop and new 4K (Radeon R7 M270) videos?

  Just bought new e Dell Inspiron 7000: CC of Photoshop is so slow, so it's actually not possible to use it. No compatibility issues?

  Hi paolol,

  Please click the link below

  Video editing using Adobe Photoshop CC | Shooters from 4K

  Kind regards

  Mohit

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• compatibility issue between the windows operating system 7 and NERO 7 ultra edition

  y at - it an easy way to make NERO 7 compatible with windows 7

  Thank you

  I took a glance at the website of the company Nero. It seems that Nero 7 is compatible with Windows until Vista operating systems. Here's what the company says about Windows 7 and Nero 7.

  You may need to upgrade to a newer version of Nero.

• Compatibility issues with windows 7 and maplestory

  I have windows 7 32 bit, I downloaded maplestory and when I clicked it, he jumped to the top with a box that says it has compatibility problems.  I tried to go to the properties of switching it forms XP SP3 and windows vista and rebooted but none of this seems to work.  I also went to troubleshoot compatibility and put it in my specefic problems, but it comes back with an error in Japanese.

  Help?

  Hello

  MapleStory has no information on the Windows 7 Compatibility Web site. The origin of the game specifications are for Windows 98 - XP.
  It is possible that they did not have it compatible with Windows 7 yet.

  You can check with the support of Maplestory for all hotfixes that may be needed to play the game on Windows 7.

  http://MapleStory.NEXON.NET/support/downloads.aspx

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compatibility issue with DVD Maker and Windows Media Player

  I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

  I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

  I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
  A month ago, I did 2 DVD with images and music. Here's what I did...
  Open Windows Movie Maker...
  1. I imported images in the timeline.
  2. I imported the music (wma in your case) file to Audio column / music.
  3. I have synced it so that the images and the music would start and end at the same time.
  Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
  4. I clicked on publish on DVD.
  Windows DVD Maker wil pop up. You know the rest of the steps.

  t-4-2

• Compatibility problem between RH 9 and HR 10

  Person to another branch of our company received a copy of RH 10 to update an existing WebHelp project that was done originally in RH 9. For various reasons, we need to revise this draft (now in HR 10) by another person in the company who only has 9 HR. However, we get an incomaptiblity error when we try to reopen it in RH 9 (see figure below).

  I was under the impression that you could go "back and forth" between the two versions. Is there a work around for this? We want to keep the development in the RH 9 environment and cannot afford to move at this time.

  

  Hello

  Surely you can downgrade to RH9 as long as you do not use specific features of RoboHelp 10. (You can even go down to RH8.)

  See http://www.wvanweelden.eu/articles/downgrade-robohelp-project for an overview for a how to.

  Take a bow

  Willam

• issue between Vista OS and Norton Internet Security 2010

  I recently installed Norton internet Security 2010

  I have Vista Home premium 32-bit with SP2 for Vista

  The installation of the program Norton Internet Security 2010 went well. It seems to work

  However, I note that Norton Internet Security indiacted a mistake involving module them ccSvcHst

  the error message indiacating

  Norton detected some sort of error with ccSvcHst.exe function program and the error code was

  0 x 80070490

  can someone tell me what this means? I seem to be able to get my updates of Norton and my Microsoft updates without problem

  This error means that my Norton Security is NOT working?

  Here is your link to another.

  Preparation tool update system for Vista
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/39449a7b-30f0-4814-b49e-752bdce21fbd

  Have you ever run the tool until the end, Yes, it's OK to run it manually?  Let the finish this time.

  Try running it in one clean environment with no other third-party programs or services that are running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  Error 0 x 80070490 has a possible sense of...

  Permission denied / [a problem initializing or using session variables] or item not found

  which is good to know isn't?

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Have you tried the Support offered by Norton?

• compatibility issues with windows 7 and card adapter and video screen in a computer laptop compaq nx7040

  After I installed Windows 7, 32-bit in my computer compaq laptop nx7040, there were two messages stating I have video card and display adapter problems. The pilots could be exceeded, but I can't find an updated driver. Can anyone help? Thank you.

  Hello

  This is an old machine (I know because I had one). It was a very good machine, but it upgraded to Windows 7 is a bit too far I think.

  Kind regards.

• Official word on Captivate 8 and 10 of Windows?

  Hi all

  I was wondering if there is no official word from Adobe on the compatibility between Captivate 8 and 10 of Windows yet?

  Thank you kindly,

  Nicole

  I have not seen it mentioned in everything from Adobe so far. If it is not in the technical under system requirements specification, you must assume for the moment that Cp8 is NOT compatible.

  http://www.Adobe.com/products/Captivate/tech-specs.html

  In the past, when new versions of a major operating system first came out, there was often problems with compatibility.  If you need to Captivate to work on your OS and it is critical to your day-to-day productivity, DO NOT rush in and install the latest OS and hope for the best.  Install an operating system is usually a street one-way (or at least VERY inconvenient for roll-back).

  If it turns out that Cp8 does NOT work with Windows 10, past experience of similar questions (for example 6 Captivate with Windows 8) suggests that you could relate to upgrade to the next version of the Cp for compatibility. If a patch is released for the older compatible version, you can be waiting weeks or months for it.

• I just bought a new LG monitor. Photos open in Microsoft Live Photo are green. Is there a compatibility issue?

  I wonder if there are some compatibility issues with monitors LG and Microsoft Live Photo Gallery?  One of my photos that I opened with Photo Gallery is all green.  LG assured me that it is not the monitor.  I opened a couple of other photo programs and photos look good on those.  I use Microsoft Photo Gallery most of the time, and it's embarrassing.  Anyone have any ideas?

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. For Windows Photo Gallery, see problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

• I'm unable to access webmail on TalkTalk (formerly Tiscali) using Firefox 5.0 and TalkTalk tell me there is a compatibility issue?

  I have not had any problems with my previous version of Firefox and I can access my Tiscali/TalkTalk webmail using the latest IE browser. I am connect but cannot access the contents of the mailbox. I asked TalkTalk on the problem they have stated that "If you are unable to access the mailbox using Firefox version 5, so I want to inform you that there is compatibility issue with Firefox version 5 and webmail of Talk Talk, thanks to which you found the error above. Alternatively, you can try to uninstall the latest version of firefox, and then reinstall the earlier version to settle the case. "Can I assume that these difficulties will be resolved between you? I would prefer to use Firefox and do not wish to go back to IE.

  Apparently, TalkTalk mail will work with Firefox 4 and 5 of Firefox If you set the browser are to TalkTalk mail saying that you always use version 3.6.

  You can find instructions for this in a post on the forums of TalkTalk: Firefox 4 & TalkTalk webmail - Forums.

  Note: when you open about: config the first time, it will display a warning message that you have to be careful with changes that you make. It's certainly good to keep in mind.

  It work?

• compatibility problems between DA2400ES and X930D?

  Purchasing a X930D, someone has already tried it with a DA2400ES and/or someone does know of any compatibility issues?

  Hi Zactly,

  You can connect to the TV X930D STR-DA2400ES receiver without any problem.

  There is no problem of compatibility between these products.

  Kind regards

  -Anthony

  If my post answered your question, please mark it as "accept as a Solution.