Compatibility of memory RAM

Similar Questions

• PowerEdge SC1425 - upgrade Memoria RAM [GRO]

  Buongiorno.

  On our Dell PowerEdge SC1425 - serial number 9TRNQ1J - abbiamo di memoria RAM add need.

  Secondo features found in manuale (SDRAM DDR - 2 400 ECC - 72-bit, PC-3200 Unbuffered, SDRAM, DIMM, clocked at 400 MHz) it nostro fornitore, ha dato della memoria compatibile con queste features, tried my abbiamo anche, e sebbene works memoria di diversi tipi, questa non viene riconosciuta dal Server che in indica "modules no memory detected" con accensione seers of diagnosis : verde-giallo-giallo-giallo.

  Vorremmo sapere is esiste some della memoria, oltre a particular characteristic which indicate in manuale oppure is esiste some settaggio inversions del bios del server per poter fare Upgrade ram of della.

  Grazie.

  Salve,

  He problema e che he Server non riconosce PC2-5300, Halter retrocompatibilil knew altre macchine, lato Server selezione e molto più ristretta.

  Di seguito di ufficiale Dell compatibility list:

  F6928	DIMM, 256, 400 M, 32 X 72, 8, 240, 1RX8	400 MHz, 1RX8 256 MB DIMM 32 X 72, 8K, 240,
  XP764	DIMM, 1 G, 400M, 128 X 72, 8, 240, 1RX4	1 GB DIMM, 400 MHz, 128 X 72, 8K, 240, 1RX4
  4D554	DIMM, 256, 400 M, 32 X 72, 8, 240, ROMB	400 MHz, 256 MB 32 X 72, 8K, 240, ROMB DIMM
  X 1564	DIMM, 4G, 400 M, 512 X 72, 8, 240, 2RX4	4GB DIMM, 400 MHz, 512 X 72, 8K, 240, 2RX4
  G6036	DIMM, 2G, 400 M, 256 X 72, 8, 240, 1RX4	2 GB DIMM, 400 MHz, 256 X 72, 8K, 240, 1RX4
  H2084	DIMM, 512, 400 M, 32 X 72, 8, 240, 2RX8	DIMM 512 MB, 400 MHz, 32 X 72, 8K, 240, 2RX8
  JT055	DIMM, 2G, 400 M, 256 X 72, 8, 240, 2RX4	2 GB DIMM, 400 MHz, 256 X 72, 8K, 240, 2RX4
  G6035	DIMM, 1 G, 400M, 128 X 72, 8, 240, 2RX8	1 GB DIMM, 400 MHz, 128 X 72, 8K, 240, 2RX8
  F6929	DIMM, 2G, 400 M, 256 X 72, 8, 240, 2RX4	2 GB DIMM, 400 MHz, 256 X 72, 8K, 240, 2RX4
  D6599	DIMM, 1 G, 400M, 128 X 72, 8, 240, 1RX4	1 GB DIMM, 400 MHz, 128 X 72, 8K, 240, 1RX4
  C6956	DIMM, 512, 400 M, 64 X 72, 8, 240, 1RX4	DIMM 512 MB, 400 MHz, 64 X 72, 8K, 240, 1RX4

• Usable memory (RAM) less than the installed memory, showing remove Win7 dual-boot.

  Original title: "Memory (RAM): 12,00 GB (3.62 GB usable)", how can I resolve this issue and remove a dual boot Win7?

  I recently, after experincing problems (see below the Intel SSD), noticed the system said that there is only a 3.62 GB of Ram available in my computer.  I have this statement ' Installed Memory (RAM): 12,00 GB (3.62 GB usable) "the computer has always used a higher around 10-11 GB amount.

  I noticed that the Windows performance index was 5.6, after adding an Intell 240 GB SSD, it jumped to 7.6; However, now with the problems is 5.4, caused by the RAM.

  I ran the full memory diagnostics: start-up and verification of memory it says I have 12 GB of RAM can be used across both.  I asked with Asrock if my RAM and CPU compatible before buying it, and they said it was a wise decision for 970 Extreme4 motherboard.  I subsequently has inquired about the Kingston RAM and included information from a - Data, and they said they used Kingston ringout for approval process as with a - DATA, including the compatibility of the different types of RAM used together.  The RAM was tested and is placed on the store of the computer.
  This problem did not exist until I installed the Intel SSD.

  I don't have a problem with dual boot on my computer after installing a new 7 ultimate on the SSD, and when it worked normally, I atttached the old hd back into your computer, because important data it contains.  This caused a situation of dual-boot.  I did some research and jumped the drive as a slave thinks that it would not cause a problem.  How can I remove Windows 7 from the old hd and then remove the window dual-boot.  I tried the old way to change the startup configuration, however, I can't find it in 7 Ultimate SP1. I also sent the old HD and the start window remained, as the index and the usable Ram 3.62.

  My Questions as already said:
  How can I return to a usable 12 GB of RAM and return the highest Index of Exp Win?
  How the dual boot can be edited to boot from my SSD without window startup and remove window 7 my old HD eventually without formatting?

  The system configuration:
  Processor: AMD FX FD8300WMW8KHK 95W Vichera 3300 MHz

  Memory: ADATA DDR3 1333 AM2U139C4P2 - s 4 GB x 2
  Kingston DDR3 1333 KVR1333D3N9 / 2g x 2

  Graphics card: MSI GeForce GTX 750Ti Gaming

  Motherboard: ASRock 970 Extreme4

  Power: 600 W power supply

  HD: IntelSolid State Drive 240 GB 335 Series

  OS: Windows 7 Ultimate 64 bit SP1.

  The version of the BIOS/Date: 32 MB FRIEND UEFI BIOS legal with GUI support version 2.60

  NISH

  When you are satisfied with your problem is solved, please mark the answer. It helps others see what answered your question.

  If you posted the original question, you can mark the question as yourself have. Just click the mark as answerbutton.
  Source: http://answers.microsoft.com/en-us/page/faq#faqAskQuestion8

  You should see the response from Mark (and have found this useful Me) buttons on all messages, except your own messages, sent by others about your. They are there to allow you to tell other users, messages that you have found useful, and ultimately what solved your problem or answered your question.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• 11 - inch MacBook Air can move 16 GB memory ram?

  Can a MacBook Air 11 inches go to 16 GB memory ram?

  If this is not the case, what Macbook can go up to 16GB of memory ram?

  I prefer to buy the cheapest and then buy my own ram put in me, but I've heard some macbooks now, you cannot install your own memory, must come installed in the factory.

  It is not possible to update the RAM after purchase on a MacBook Air, MacBook Pro with Retina display or a MacBook 2015 or newer. Click here for the list of possible RAM maximum for each Mac model.

  (144574)

• Pavilion DV6500: upgrade memory RAM of HP Pavilion DV6500

  Hi, I would like to upgrade memory RAM on this laptop:

  HP Pavilion dv6500

  p/n GV262EA #AKB

  Please could you provide me with information what kind of RAM I can use?

  Thank you in advance, best regards

  phav

  Hello

  It is an old machine, which

  Supports up to 4 GB of system RAM PC2-5300, DDRII (667 MHz)
  Supports the following configurations:
  ● 4096 (2048 × 2)
  ● 2048 (2 048 × 1, 1024 × 2).
  ● 1536 (1024 + 512)
  ● 1024 (1024 × 1, 2 × 512 MB)
  ● 512 (512 × 1)

  Kind regards.

• computer laptop 15r-005tx: memory (ram) and storage (hard drive or replace it with SSD) upgrade.

  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  edd609 wrote:
  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  Hello

  Below are the specifications of your computer:

  http://support.HP.com/au-en/document/c04337709

  1. for the RAM:

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail processors)
  Supports dual-channel memory
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2) or (4096 × 2) (No 32-bit OS or Windows 7 Home)
  ● total system 12288 MB memory (8192 × 4096 + 1 × 1) (not for 32-bit OS or Windows 7 Home)
  ● 8192 MB total system memory (8192 × 1.) or (4096 × (2) No 32-bit operating system)
  System memory total 6144 MB (4096 × 1 + 2 048 × 1) ● (not 32-bit operating system)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
  ● total 2048 MB system memory (2 048 × 1).

  (Your machine uses 1.7 GHz Intel Core i3-4010U with Intel HD Graphics 4400 so it has 2 slots). Please use the manual next (page 76) to the part number het to buy good RAM. The manual also shows you how add/replace RAM

  http://h10032.www1.HP.com/CTG/manual/c04409502.ppdf

  2 SSD:

  Yes, you can replace the current drive with a good brand, standard SSD for laptops and hardware wise, please use the #59 manual page to replace the HARD drive.

  The fast and easiest way is to buy with at least 512 GB SSDS, clone the SSD HARD drive and install in Bay HARD drive as shown on the #59 page.

  Kind regards.

• Pavilion s3100n: upgrade memory ram

  Two weeks ago, I got my backup to restore the system in the mail, I installed .i have windows vista 32 bit so I installed windows 7 64 bit and works only question is my ram memory says I have 1.00 GB(895_MB_usable).my question can I upgrade my ram 1.00 GB GB 4.00 or higher memory before buying a different memory ram on ebay? Oops I forgot to mention that my old desktop is a HP pavilion slimline s3100n.sorry

  Hello

  Your device supports 2GB maximum:

  Memory upgrade information

  • Architecture memory dual channel (1 DIMM per channel)

• G62 A35ER: memory RAM Max for G62 a35er

  Hi, in the manual for my a35er G62 (http://h10032.www1.hp.com/ctg/Manual/c02542102) says that it can to support up to 8 GB of memory RAM, but the supported higher in the manual configuration is 2x2gb (4 GB).

  How can I know what kind of config my phone supports? (2 x 4 GB - 8 GB total / 2x8GB - 16GB total)

  Right in the manual, the bottom of page 1:

  Supports up to 8 GB of memory system

  Example configurations that they give the list just means that it has been sold, so apparently it was sold only with up to 4 GB of memory, but can use and accept 8 GB (2 x 4).

  This is the memory class module:

  4 GB (only for model 1.1) 599092-001

  https://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1468495663&SR=8-1&keywords=599092-001

  For the 1st generation Intel Core laptop computers, it is important that you use low density 8 black blocks by memory side only.

• HP 14-r046tu: adding memory / RAM

  Hello

  I bought a HP 14 Notebook PC (14-r046tu) sometimes in November 2014 and after a while, I noticed that little by little, he began to slow down on me. I already uninstalled the software that I don't normally use and clean up disk space, but he gave little improvement. Research, an option I can use to improve performance is to increase the memory (RAM) of this machine. If I can ask for opinion/s about this if this is possible for my machine or if there are other ways to improve the performance of my machine.

  Thanks in advance

  Hello

  RAM: Please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  The following specification is for your machine:

  http://support.HP.com/us-en/document/c04382942

  It's a basic machine, cheap, low end. I wouldn't have money to improve this machine, save money and buy a better machine will be much cheaper in the end.

  Kind regards.

• Can not open opening Adobe Photo DeLuxe 4.0 said not enough memory RAM

  Original title: opening Adobe Photo DeLuxe 4.0

  Does not open, says not enough memory RAM. I have 6 GB of RAM!

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  ·        What is the full error message that you receive?

  Try it out below mentioned suggestions and check if this may help:

  Method 1: Change the memory allocation for PhotoDeluxe Business Edition:

  a. start PhotoDeluxe Business Edition.

  b. Choose file > Preferences > discs to work.

  (c) in the use of physical memory section, change the used by PhotoDeluxe set to 75%, and then click

  d. OK.

  e. restart PhotoDeluxe Business Edition.

  Method 2: Rebuild and resize the Windows swap file:

  a. close all applications.

  b. right-click on my computer and choose Properties from the context menu.

  c. click on the performance tab, and then click virtual memory.

  d. Select the option 'Let Me specify my own virtual memory settings'.

  e. set the Minimum and Maximum virtual memory to a value equal to twice the amount of

  your computer's installed RAM, but it is not greater than 64 MB. For example, if you have 16 MB of RAM, the value

  the Minimum values and Maximum to 32 MB. If you have 48 MB of RAM, set the Minimum and

  A maximum of 64 MB. (Do not include any RAM for a RAM, such as Connectix RAM expansion utility

  Doubler).

  f. click OK, then click Yes in the dialog box confirm virtual memory settings.

  g. click close in the System Properties dialog box.

  h. click Yes in the dialog to change system settings to restart the computer.

  Contact the Adobe Photo Deluxe forum to get help.

  http://forums.Adobe.com/thread/360663

• HP Probook 6560 b: a slot of segunda da memoria ram não works

  Boa look forward

  MEU probook 6560 b nao da segunda slot memoria ram nem da para um segundo put do disco no lugar leitor DVD. Algo sera na Bios? is for como did? POIS não encontro nada para verificar the isso.

  Obrigado

  @Memory_Slot Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  English: http://h30434.www3.hp.com

  Spanish: http://h30467.www3.hp.com

  French: http://h30478.www3.hp.com

  Portuguese: http://h30487.www3.hp.com

  German: http://h30492.www3.hp.com

  Korean: http://h30491.www3.hp.com/t5/community/communitypage

  Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage

  See you soon,.
  KarolB

• 2 GB of memory ram in slot 1 GB, is it possible?

  2 GB of memory ram in slot 1 GB, is it possible?

  Probably not.

  I once tried to put a 4 GB module in a location where the specifications say max 2 GB on a HP nc6400 laptop, and it wouldn't start.

  Once, I was able to do it in a desktop dc7600 PC.  Care claimed 4 x 1 GB of memory.

  2 x 2 GB memory, I installed and it works beautifully.  Just for fun, I had a couple of 1 GB chips and the BIOS reported 6 GB, but windows 7 x 64 reported only 4 GB, which was the maximum that he could take.

  Let's put it this way, I wouldn't go out and buy a 2 GB chip and take a chance that it will work.

  If you have one, you can borrow, then give it a try. The worst thing that happens probably is that the laptop does not start.

• What happens to the extra 12 GB 8 GB memory RAM that I installed Vista Ultimate 32 bit?

  Hello

  Could you please tell about the question in the topic?

  Thanks in advance

  Hello

  It's a very simple answer

  a 32-bit windows system cannot use RAM 12GBs

  You can install 4GBs of RAM in a 32-bit operating system; and that's the limit

  Read any article of microsoft relative to your question:

  http://support.Microsoft.com/kb/929605

  System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed

  Read the explanation of Microsoft here and on the link above.

  "If a computer has 4 gigabytes (GB) of memory (RAM) installed, system memory shown in the dialog system information in Windows Vista less than you would expect.

  For example, the system information dialog box may report 3 120 megabytes (MB) of memory system on a computer that has 4 GB of installed memory (4 096 MB). "

  to use your full 12GBs RAM that you need a 64-bit operating system

  Limits of memory for Windows versions

  http://msdn.Microsoft.com/en-us/library/aa366778 (v = vs. 85) .aspx

• How check installed RAM memory and check the amount of memory RAM is consumed

  Original title: RAM used

  Is there a way I can check not just the RAM installed but used the rest of the memory used please what are the steps on the computer?

  Thank you

  Hello

  If I understand correctly you want to know how to check how much RAM is installed on your computer, as well as the way you want to check the amount of RAM memory is consumed by the computer. I will certainly help you with information.

  To check the amount of RAM installed, I suggest you follow the steps:

  • Click Start.
  • Right-click on computer and select Properties.
  • In the window system, under System properties, see installed memory (RAM) to the memory installed on your computer.

  To check the memory consumed by each program you can check by following the steps below:

  1. Open the Task Manager.
  2. On the performance tab, click on Resource Monitor.
  3. Under the resource monitor , you should be able to see the memory consumed by each program.

  

  To check the memory usage, see at the bottom of the Task Manager in the status bar where it says physical memory: xx %

  Hope the above information helps. Please keep us updated with the status of the issue to help you further.