Compatibiltiy cables Twinax Cisco with EMC VNX/e

Similar Questions

• FCoE Multihop EMC VNX 5300 to Cisco UCS FI / Series Blade B

  Hi all

  Having a performance problem with FCoE multihop of UCS.

  The presentation is as follows:

  UCS 5108 chassis--> 6248UP FI--> pair of N5k (5548)--> 10gig FCoE EMC VNX 5300 2 x 2 port card

  Everything is functional - I can't ping from tissues to the pwwn EMC n5k cf.

  I can see the paths in vmware on the vhbas everything is in place and active. The VMware is set to round robin and the side EMC ALUA 4.

  I'm at a loss on how to solve it more. The SAN is connected to the fabric with om3 fiber LC + 10 GB SR SFP. UCS has a pair separated from fcoe port fabric channels k 5 down to YEW (the help of twinax cables). The data are separated on its OWN virtual machine. Essentially, I followed the guide from cisco on how to proceed:

  http://www.Cisco.com/en/us/products/ps9670/products_configuration_example09186a0080c13e92.shtml

  The hosts are not boot from SAN for now, they are started from storage USB flash on the blade.

  The show on the 5ks flogi shows all connected, and as I said before, I can see the LUNS on the blades. When howerver I try uplod a file ISO DIS 2.5 GB in size in a data store takes about 2 ½ hours.

  I have the most recent UC 2.1 (2) a firmware installed. The N5ks have NX - OS 6.x. The blades have ESXi 5.1 with the latest drivers enet and installed cisco fnic.

  The default qos for n5k is configured.

  Any ideas would be greatly appreciated!

  -Nick

  Hi Nick,

  Interesting observation. We have an IP hsrp in catalyst 4500 as a router for network management with ip redirects on a reason any. I have disabled ip forwarding as well and currently I do 30K iops with fabric RR double active path and no error in the CPNI on esxi logs.

  I'll have to do additional tests to see the weather, that it is a coincidence or a fix, by activating the ip redirects again. But it looks promising.

  As my e/s load is done with the network management of e/s generator (http://labs.vmware.com/flings/io-analyzer) should have no effect on the routed network FCOE...  He latest even came to my mind to check network Ethernet side.

  Thank you Nick for a great tip.

  concerning

  Mikko

• Switch N4032F and connectivity EMC VNX 5400

  Currently have R720 Dell servers connected to N4032F with Dell twinax cables and

  Reference Dell EqualLogic SAN 6210 connected to N4032F with Dell twinax cables.

  Want to connect EMC VNX 5400 (a ports SFP + with the fiber GBIC)

  Can I remove the EMC VNX IGBC and connect it to the Twinax cables or what I put GBIC in N4032F and connect them with fiber?

  Or do I need something else? EMC asked if Dell stuff not active/active on their ports?

  A Finisar FTLX8571D3BNL works for the N4032F Dell connection to an EMC VNX or Data Domain

• Problem of sync of folder offline EMC VNX 5300 and Window7

  We have an EMC VNX 5300 and we use it as our NAS storage. Everything works ok we seem to be problems with folders offline synchronization of files ok but when we delete the file in the folder it seems to remove it, but in fact it leaves orphaned. Someone has seen this. Help!

  Hello

  I suggest you to contact the team of EMC support for assistance. They should be able to help you.

  See the link.

  https://community.EMC.com/welcome

• Integration with EMC

  The integration soportada esta para poder grabar el video Teleprescencia dentro?, in storage from EMC (VNX o ISILON) principalmente y saben como puedo calcular total grabación para soportar en el storage

  SE sub-granting detect 50 camaras PrecisionHDMC 1080 p 12 x camera, 8 hrs y los 365 Días.

  Gracias

  Hola Juan Carlos,

  Video mediante El are posible grabar el uso del telepresence Content Server. Las use van desde los 200 para los 400GO, pero storage are posible configurarlo para may use a network (NAS) storage.

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11318/ps11347/qa_c67-666702.html

  Also in the Administration Guide is explica como configurarlo para an external storage.

  http://www.Cisco.com/en/us/docs/Telepresence/TCS/5_3/Administration/Guide/storage.html

  Saludos,

  Tere.

  If you find this article useful, please note!

• Good plugin for EMC VNX VAAI?

  Dear all,

  We organize 6 ESXi 5.0 update 1 bunches with 2 boxes of EMC VNX 5500 for iSCSI (only using block, no file) connections. I was wandering if we use the correct VAAI plugin.

  ~ list of modules system # esxcli | grep ' Name\ |-\|vaai'

  Name is charged is enabled
  ------------------- --------- ----------
  true true vaai_filter
  true true vmw_vaaip_emc
  true true vmw_vaaip_cx
  ~ #

  
  ~ # esxcli central storage peripheral vaai situation get

  NAA.600601601c002f00422ca2d160aee111
  VAAI name of the Plugin: VMW_VAAIP_CX
  ATS status: supported
  Clone status: supported
  Zero status: supported
  Delete status: unsupported

  VMW_VAAIP_CX the plugin VAAI is correct for VNX or only CLARiiON?

  If not, how can we load the right pair?

  Thanks in advance,

  Olivier

  This is part of the VAAI.  You need to exploit functionality VAAI, time specific to the vendor for each device a filter of PSA device and a plugin VAAI. VMware provides a unique device called VAAI_FILTERPSA filter plugin. If a device supports unloading of VAAI, it is first claimed by the VAAI VAAI_FILTERfilter. Once claimed by the filter, a plugin vendor-specific VAAI will ask and then manage your device.  In this case, the specific plugin of the seller is vmw_vaaip_emc. It is also provided by VMware.

  You only need to add VAAI software in the case of NAS storage arrays - table seller gives it. In the case of the bays of block storage (iSCSI, FC, FCoE), the software already comes with the ESXi host.

  HTH

  Cormac

• A USB cable will work with any device?

  Title: USB cable original

  Hello.

  Let's say that a SCART is not equipped with a USB cable.

  Is a 'universal' USB cable to work with "any" device USB or different types of devices have different types/forms of USB cables?

  Thank you.

  USB is pretty universal.  The flat rectangular plug that goes in your computer is known as a 'Type A '.  The square plug that usually goes into a printer is a "Type B".  There are also small connectors (Mini-A, Mini-B, Micro-AB, and Micro-B).

  <>http://en.Wikipedia.org/wiki/USB#Connector_types >

  Generally, if you find a cable with the appropriate connectors, this will work.  If the device to which you are connecting does not fall into a general 'category' (e.g. mass storage devices), then the driver software may be necessary at the end of the computer.

  HTH,
  JW

• How is it that Turner Classic Movies (home cable TV) come with captioning, but whenever the same movies are available online (e.g., YouTube), the cc is not always available?

  ONLINE CAPTIONING

  Please explain how is it that about 90 percent of Turner Classic Movies (home cable TV) come with closed captioning, but whenever the same movies are available online (e.g., YouTube), the cc is still unavailable?  Then, of course, there is the possibility of using the Google auto-transcription, which is a sequence of words scrambled for the most part, although I appreciate Google constantly trying to improve the technology on the Internet...  Does anyone know a website of classic movies where appropriate captioning is available?

  Thank you very much.
  Joe

  Hey Joe,

  I suggest you look for the classic movie with subtitling site coded using the closed your favorite search engine.

  You can also upgrade the flash player to the web browser and check.

  http://get.Adobe.com/flashplayer/

  Reference: http://tv.adobe.com/watch/short-and-suite/closed-captions-in-premiere-pro-cs55/

  http://help.Adobe.com/en_US/Captivate/3.0/help.HTML?content=05_audio_21.html

• ERP R12 12.1.3 on EMC vnx

  Dear all

  Please let us know can we use shared EMC VNX storage for ERP R12 application tier.

  Regarding

  T.A

  Yes you can. However, you can contact the seller for documents of this kind--> http://www.emc.com/collateral/hardware/white-papers/h8124-oracle-e-business-unified-storage-vmware-wp.pdf

  Thank you

  Hussein

• SRM 5.5 with EMC SRDF. Full recovery but reprotect fails

  Hi all

  I am fairly new to SRM, but have been plugging away in establishing a new environment that uses:

  vCenter 5.5 u1 (two Sites)

  Solutions Enabler 8.0.1.0 - 1953

  EMC SRDF Adapater (SRA) = 5.6.0 VMAX 20 k

  EMC SRDF utilities SRA (and community VSI) = 5.7.0.2

  RS = 5.5.1.8569

  I followed documentation provided by Cody Hosterman ~which is great and got me almost to the end.  I was able to successfully switch (recovery), a virtual machine using a test Stimulus Plan from Site A to Site B. It was working fine.

  We don't use TimeFinder (unauthorized) and so when we realize the expected behavior once happened that the SRDF link has been broken. The State of the R1 to Site A device has become write disabled. The device of R2 in Site B became read/write and the State of the device group is "Fail Over". It is in SRDF asynchronous mode.

  
  

  To try to 'Restore' the group, I see errors relating to the configuration of the storage to reverse direction.

  http://i.imgur.com/zWiGtT5.PNG

  I checked the log EmcSrdfSra as suggested on the site now main SRM server and it seems that there is a mistake shortly after you have created a new consistency group.

  http://i.imgur.com/5hZT8HQ.PNG

  I raised a support call with EMC with it directly as a first port of call, but it is in its infancy so I thought I would ask if anyone has any idea what could go wrong here. I have exhausted my googleFU skills and I'm at the stage of trying to get some eyes on the issue. I am happy to provide more information if necessary or to answer your questions - what someone might have.

  
  Really hope someone can help!

  Thank you!

  Ryan

  Hello

  I got some progress with this so I thought back and share what he needed to solve this problem.

  Essentially, in our environment, we have a VMAX in each site. We have now two servers Manager array with Solutions Enabler (on a Unisphere web) installed. The reason is that we have a VCE Vblock and VCE provided a nursery table server. In addition, we have built our own for the purposes of the SRM and other similar things.

  In essence, we do not configured new servers of facilitators of Solutions fully and missing GNS on them. We have also put in SRDF pairs and above all: GROUPS of DEVICES on the old managers table manually. These groups of devices répliquiez not to the new servers, but the other config (Volumes, etc.) have been! So SRM was trying to talk to our new boxes and only really get half the information on volumes and above all the volume groups.

  Once we have properly configured device groups on each site for the Volumes that were used for SRDF replication, everything started working. Since then, we have been in and double-checked the configuration manager servers on new table and all is good. This solved the problems that I posted above.

  I hope this helps someone in the future!

  Ryan

• Clear all alerts stateless in OEM12c with emcli

  Hello

  Can someone please help me on how to clear all alerts without State for all targets with emcli, the following example does not work:

  . "" / emcli clear_stateless_alerts-older_th = 7 - target_type = "oracle_database" - target_name = ' * '.

  There is no such target * (oracle_database).

  emcli does not recognize "*" or "%".  I also want to include all the target_typeif possible, there are many targets and target_type to make them one by one.

  Thank you

  Willem

  Hi Willem.

  In the game of out-of-box rules: "Management of Ruleset incidents for all targets", there is a named rule: 'Rule to auto-clear metric more than alert events 7 days' which applies to all stateless events that don't have a related case and will be open for more than 7 days. If this out-of-box ruleset is activated, then these events are automatically deleted by the rule.

  Refer to

  12 c Cloud Control: automatically configure a rule Incident to metric alerts clear stateless (Doc ID 1559436.1)

  Kind regards
  Rahul

• iPhone 5 loads some cables and not with others

  My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

  Hello, SalinasEd!

  Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

  If your device doesn't load or loads slowly

  If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

  1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
     
  2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
  3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
     
  4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
  5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
  6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

  * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

  See you soon!

• What is best modem cable to twin with new extreme apple 802.11 ac

  I have an old motorola sb6121 paired with new apple 802.11ac extreme I bought yesterday and after 12 hours of trying everything I keep getting disconnected every few seconds... I have read all the message concerned and tried them all to play nice... When I have more signals 85 Mbps because I pay for the explosion of comcast.  I want a new modem and would like to know what is recommended... I see zoom 5141j is recommended, but I see zoom a modem cable new 16 x 4... It would be to my advantage to go with vx 16 x 4 8 x 4 channels at the time of the twinning with extreme? Thank you

  What is best modem cable pair with the new 802.11ac Apple extreme

  Questions like this are indeed impossible to answer... especially because that person has tested every modem with an AirPort Extreme to see if there is really a modem 'best '.  Even if it were possible to come with a modem 'best' but... it would be judicious bit to choose this modem and then knowledge that was not supported by Comcast.

  Therefore, a better plan for you may be to search a list of modems supported by Comcast, narrow your choices down to 3-4 products, then post this list here and ask other users of Comcast comments on how the products have performed for them.  You can also consider posting on a forum online from Comcast as well.

  Regarding your question about the new Zoom modem, this product is really new, so it will be some time before a work experience can be developed for this product. It seems that the new Zoom modem is designed primarily for working with connections to high speed... 600, 700, 800 + Mbps Internet speeds. So, unless you plan to upgrade to a plan of Internet connection with these types of speeds in the near future, you probably don't need a modem with this type of functionality.

• Can I use a USB keyboard (cable or wireless) with my KDLNX810 TV?

  My Sony KDLNX810 USB ports, it can be used with a USB cable or a wireless keyboard? I tried with a wireless keyboard and access to youtube, without success. Is there a driver or something that needs to be configured? Or it just doesn't work?

  I also tried to find a remote control (iphone) app, but have not found a for this model.

  Thank you

  Hello Duane,

  Welcome to the community of Sony.

  Wireless keyboards are not compatible with the TV.

  However, you can use the 101 wired USB keyboard keys with the TV.

  This TV only has not the function distance media. Therefore, it can be controlled using the remote application of media.

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• H233H"cable not connected" with the computer is turned off

  My H233H monitor displays an annoying blue "cable not connected" when my computer is off or in stand-by mode.  Monitor works find out otherwise and all the buttons on the front panel work.  But impossible to find a setting that will turn the monitor off when the computer stops sending a signal.

  If I unplug the cable from the monitor to the computer's HDMI, should not the monitor eventually fade or go to sleeo?  Or will she continue to display this message "cable not connected" blue indefinitely?

  Thank you

  Well, I realized that it is a problem of Acer monitor with HDMI input.

  There is no problem if I connect my H233H monitor with VGA or DVI cable.

  Just thought I'd come back and answer my own question if someone ever comes back here with a similar problem.

  Good luck...