Compatible replacement for HP g60-216em (NF270EA) hard drive

Similar Questions

• Replacement for HP Pavilion Elite e9250t HARD drive

  I get an error message saying "A disk in a RAID 0 volume is a failure".

  I plan to replace both drives, currently, to 500 discs with a capacity higher than as 2 TB each. The Pavilion Elite e9250t supports 2 TB disks? And can I install them with RAID, so that my data is protected?

  Hello JMHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have questions about your desktop PC HP Pavilion Elite e9250t supports 2 TB disks and whether or not it supports RAID. According to HP Pavilion Elite e9250t desktop PC product specifications and configurable Options , your computer supports "2 TB (2 x 1 TB) 7200 RPM SATA 3 G (3.0 Gb/s) ' so the answer to your first question is 'YES', it will support a 2 TB hard. As to your second question as to if she supports RAID, indio motherboard (which is what you have) supports the following:

  • Integrated RAID controller: P55 (same as previously introduced application ICH9r RAID)
  • Steps to configure RAID (internal link to setup for P55, even the steps of configuration for ICH10r and ICH9r)
  • Intel RAID solution is called Intel Matrix Storage Technology (outside link)
  • Only some models indio compatible ship RAID (see datasheet for your model). Compatible RAID means that the system is ready to be configured for RAID 0 or RAID 1.
  • Migration from 1 to 0 is supported by material in the world.
  • RAID modes supported *:
    • RAID 0
    • RAID 1
  • Additional resources:
    • Overview of RAID
    • Intel Matrix storage technology (outside link)

  * NOTE: three hard disks requires a RAID 5 and RAID 10 four hard drives. While the hardware can support other RAID modes, only RAID 0 and RAID 1 modes are supported on models that include this motherboard.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Replacement for Dell Latitude E6230 HDD (hard drive)

  Hello.

  I need to replace my old HDD in Latitude E6230.

  I found in the store a 500 GB HARD drive model, but I need to be sure if it is compatible with my E6230.

  Seagate Momentus 5400.6 fact (ST9500325AS, PN: 9HH134-500) compatible with Dell Latitude E6230?

  Thanks in advance.

  Finally, I could say that 9mm HDDs are not compatible with Dell Latitude E6230.

  I have consulted with Dell service center and they have confirmed that only discs hard 7mm will work with E6230.

  After that, I tried again to install 9mm in my E6230, but failed.

  So, be very careful when you get answers here not from official representatives of the Dell!

• I need a driver for a Maxtor 3200 external hard drive compatible with windows 7

  I need a driver for a Maxtor 3200 external hard drive compatible with windows 7

  I just got a chat session with a Seagate tech (formerly Maxtor).  He said that the Maxtor 3200 s/n I made in 2006 don't is NOT supported by Win7 and never will be.  I just bought the year last from Radio Shack for about $80,00.  If anyone has any ideas, I'm open to try.  I read a blog by which this guy has followed this procedure and it worked, said: let HD; Start Win7; Turn on HD; restart the pc (NOT reboot).  Who has not worked for me.

• This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

  I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

  Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
  If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

  Why you want to replace a 500 GB with a 80 GB drive it?

  Macintosh is not an operating system

  A 80 GB drive is too small for a win7 PC

• Use the TC for backup and as external hard drive

  Hello

  Can I use TC for backup and as external hard drive?

  If yes then when it is full, TC erase my personal data I have stored in TC as a hard drive or erase the oldest backups?

  1. Yes, but you shouldn't. Your working data and backups must be on separate drives in case one of them goes down.

  2. Time Machine will not erase the data it did not originally there.

  (142739)

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• How much space do I need to allow for Vista while partitioning the hard drive?

  How much space do I need to allow for Vista while partitioning the hard drive?

  I am installing on a new drive hard and need to partition the hard drive.

  I remember he had a certaing amount allocated for vista and before recovery.

  Help, please!

  Hello

  40GBs is the minimum; who will be vey quickly useless.

  Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

  You can use all of the hard disk space available to install Vista on.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

  I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

  I have not tested, but it should work with Lightroom:

  http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

  Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

• How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  Right-click on the folder name and choose the location of the update folder.

  See fig 8 to the attached link:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

• What are the hard drives of compatible replacement for HP Pavilion DV6T-3000?

  I have a HP Pavilion DV6T-3000 PC laptop, and S.M.A.R.T. has constantly warned me of impending hard disk failure. I already reinstalled the hard drive, and I still get error 301 s.m.a.r.t. So, I decided to buy everything new, replacing the hard drive. I use the latest operating system Windows 7 (64-bit).

  Currently, I have the hard drive supplied with this notebook: A Western Digital Scorpio Mobile Hard Drive (WD5000BEKT-60KA9T0). Can someone tell me if this drive (http://www.wdc.com/en/products/products.aspx?id=130) is compatible? If not, could someone recommend me a compatible spare for my laptop hard drive? Thank you.

  Hello

  Yes, it should be compatible with your device.

  Concerning

  Maton

• How do I download an another CC for installation on a new hard drive? Old is dead and has been replaced, but I'm starting to any operating system.

  My CC number 1 installation went with the old, is crushed, hard drive. Installation of number 2 is on laptop. How can I download another copy for the new drive?

  Hello

  Please use the following link to download the Adobe Creative Cloud Desktop application: Download Adobe Creative Cloud apps | CC free trial Adobe

  See also,

  Download and install Adobe Creative Cloud apps

  Connect and disconnect activate Cloud Creative applications

  Download and install the non - trial apps Creative Cloud

  Let us know if that helps.

  Kind regards

  Bani

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• Pavilion DV6-7010US: Windows 7 x 64 OS Recovery for a customer with a hard drive defective

  If a customer brings in his laptop DV6 we replace the hard drive (physical hardware failure on the read/write heads, click of death) and you notice the product key (of course) is rubbed off the label.  In addition, the client wants that pass us 850 Pro Samsung SSD (no problem) as soon as we have the HP recovery media.

  So we order the media and go to install it, and the first thing we encounter at 6% is the error: failed to create the CDS. FLG

  * crap *.

  Troubleshooting time:

  Tried an external DVD - RW drive to install OS - no dice

  Tried a disk WD Black 7200 RPM (new) - No dice

  Tried removing the RAM bars, different slot configurations - no dice

  Many other hours of troubleshooting resulted with all the same result.  We even recalled HP to verify that they sent the correct discs which they categorically said they did.

  So here we are with a laptop that should have only taken an effort of 2 hours and ended up with a happy customer, and now we are nowhere close to a successful outcome.  So I return to the forum of the assistants, geniuses and then the occasional * happy? * HP Support person asking for help.

  Here is the info:

  Pavilion DV6-7010US

  P/N: B5S11UA #ABA

  The system board ID: 182 d

  CT Council number system: PCRFQ2A2E2SAFE

  BIOS version: F.25

  Discs provided for us at HP ($ 35):

  Part number: 692848-001 and 692849-001

  Favorite of hard drive to install to: Samsung P/N - MZ7LN500, M/N-MZ-75E500, EVO 850 500 GB SSD

  Secondary Option: Western Digital P/N: WD7500BPKX, HDD 750 GB 7200RM

  Any help would be extremely appreciated!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information). If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about it here.
  
  Thank you for visiting the Forum from HP Support.

• Portege 3440: ntoskrnl.exe file needs to be replaced - how to start without external hard drive

  Hello

  My 3440 has developed a problem, I think the boot.ini file corruption that it requests to the file ntoskrnl.exe replaced at startup. The problem is that I don't have an external drive to boot from. When I press F2 it gives me a list of devices, that which no no it starts from. I don't have the external CD drive for this, and it won't have a USB floppy drive.

  It is impossible for me to solve this problem without the external port replicator or a cd player?

  Thanks in advance

  Pete

  Hello

  Unfortunately, without the access on the Windows CD you will not be able to fix it.

  The ntoskrnl.exe file is placed on the original Windows CD in the i386 folder.
  You could start at the beginning of the CD to make the repair console by pressing R
  In the repair console, you can use this command:

  Expand D:\i386\ntoskrnl.ex_C:\windows\ntoskrnl.exe
  (D is the CD drive)

  But as said above seems that you will need the CD player

  But wait if the i386 folder has been installed on your HARD drive you could expand the ntoskrnl.exe in this folder to C:\windows\