Equium A60: ATI mobility issues

Similar Questions

• Equium A60 - ATI Mobility Raedeon 7000 IGP Graphics Driver

  My laptop has been crashing like crazy these days. It was deleted and reinstalled using the recovery disk, however the problems is still as bad as ever.

  The error message would advise to check updates - but I can't find on the site - they have one for 2004 - but that was before I bought the machine.

  I am a novice - I admit that... So can someone advise

  http://www.yournewdriver.com/ATI_MOBILITY_RADEON_7000_IGP_740.htm

• Satellite A60 - Ati Mobility Radeon 7000 IGP error

  The A60 has an ATI Mobile Radeon 7000 IGP, and a file called ati2dvag.dll continues to spoil. He'll either on a blue error screen, or it changes the resolution of 640 x 480 and 4 bits. It has something to do with an infinite loop, or something. It happens randomly. Some days he can barely, and other days it always messes up. I googled the problem and it seems that many people also have the same problem. I read through many discussions and still have not found a solution. I tried to reinstall the driver, the driver update, and other things. Does anyone have an idea on how to fix this?

  Hi Nico

  Can you please tell us if there is no reason for that matter? You did what can be causing this problem? SP2 is installed on your device?

  I checked some forums and it seems that many users have the same problem, most of them with desktop computers. I also found the ati2dvag.dll download site. Check it on http://www.dlldump.com/download-dll-files_new.php/dllfiles/A/ati2dvag.dll/6.14.10.6462/download.html. The most funny thing is that a user has the same problem and after changing the motherboard, everything was ok. I think you should also save up to your data and reinstall the OS using the recovery CD. If there is no contact of success ASP.

  Good luck!

• Equium A60-155: ATi Mobility graphics card problem

  Hello

  I have a laptop Equium A60, recently I am getting error informing messages than the "display driver ATi2mtag has stopped working properly.
  I have reset my machine as told to do the error dialog box. Reset works fine, but the laptop crashes to the desktop, when turned off and on again once I get the Safe Mode screen.

  I reinstalled the driver for the graphics card several times, and the error persists through safe mode. The returned error and trying to open in safe mode, the machine flashed a blue screen of death, too fast for me to read, even applied for each of the available options. I was unable to cross this safe mode selection screen.

  As a last resort that I reformatted my laptop, using the Toshiba CD recover but the error persists, with regular driver display and the actual machine crashed.

  Since the reformat, I reinstalled the display drivers, and the problem persists.

  I downloaded the drivers from this site and the problem is still there

  You know a possible fix or solution to this problem? I am a competent enough and user of computer knowledge, so do not be afraid of getting technical in your response.

  Thank you

  Jake Houghton

  Hello

  This problem occur immediately after the operating system starts or after several usage time?
  If this issue occurs after a several time of use, so it could be an overheating problem.
  In this case, you should check the cooling modules. Check if the fans are working properly.
  Try to clean it with the vacuum cleaner.

  If this doesn t solve the problem if you maybe there is something wrong with the graphics card and you will need to contact Toshiba service for assistance.

• Equium A60: graphics issues and more

  Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was exactly as it was when I got it. stand is now working properly :) but it still is overheating (I mean really, it becomes it hot) and the graffics are always spoil.
  What happens is the screen freezes for a few seconds, then he goes the worst possible of display settings, so everything is massive and the colors are all wrong. and a pop up in windows as a encountered an error please reboot.
  This happens only at random times, I do not understand why ive formatted. I don't know if the card graffics itself is exhausted. any help or ideas appreciated. see you soon

  Hi Dave,.

  I think he should assume that your problems stem from overheating. It is very common for the dust and debris to form and block the passage of air through the CPU cooler. I suggest trying to remove such an accumulation or blowing into the heatsink (towards the cooling fans), or by sucking debris with a household vacuum. If all else fails, then you can remove the heat sink and the dust before replaceing it. Beware that this may invalidate your warranty.

  Normally a thermal trigger remove power if it detects the CPU heat too, but this does not mean that other problems cannot occur.

  If you still have problems with you appear after you have addressed the issue of overheating then please post again.

  HTH

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Equium A60-199 randomly shutting down - could it be overheating issue

  Hi, I am writing on behalf of a friend who knows his laptop A60 closing unexpectedlly... (she says that he stopped after a few minutes, or when she tried to open Firefox)

  Details of system
  Toshiba Equium A60-199 Model No.: PSA67E-00J00C8J
  18 GB free & 19 GB used
  512 MB OF RAM
  CPU Celeron 2.93GH

  Running Windows XP Home
  NIS 2006

  I took a look at distance and was about 30 minutes without any problem using FF logmeinitreach... There was nothing showing in the event log manager, for the time of day, that it would close down all before... so I was wondering if it is a faulty power supply?

  Everythng is going on well just clicked on the analysis of complete system of Norton Internet security which has not been run in a long time and the PC, stop NOW, it will not restart everything. ??

  Apparently she can hear some buzzing but nothing happens... (which I think might well be the blow fan)

  Advised her to let a little and about 2 hours later, she was able to turn it back on... I wonder if it could be overheating. ??

  Apparently he is 3/4 months than what was going on then ceased to happen and started again...

  Please can you give me some advice on how to clean it - other than to take it to a hardware shop

  I downloaded the A60 user manual and have themselves asked to confirm what show the lights - in an attempt to check overheating
  is the question...

  I've also read online "you can spray compressed air into the gills of admission but not airflow vents to help get rid of the dust and debris." I have looked at the manual and can see 2 lots of mouths... It is on the side and the other on the bottom, is e eintake the one on the side? I literally direct the air on side air intakes and the spray?

  When you ask him if she knows that when the fan is always, sometimes on, never an etc. she was thinking ot is ALWAYS on... who'd show up again overheating...

  Please notify
  tamba1

  Hello Cathy

  I also believe that the sudden stops are the result of overheating. If the dust is blocking cooling air flow grill is blocked and material can reach the critical temperature of material very fast. Sometimes you can start any application pre-installed, the CPU usage goes to the next level and laptop will suddenly stop.

  The laptop should be cleaned as soon as possible. If you have no experience with the disassembly procedure I recommend you contact the closest service and the laptop must be cleaned on professional way. It costs a little bit, but you can be sure that you use Notepad for a longer period of time.

  If you need the addresses and phone numbers to contact the ASP (authorized service provider) please visit http://eu.computers.toshiba-europe.com > support & downloads.

  Bye and good luck!

• Related issue wireless on Equium A60

  I have a laptop Equium A60 and upward of unitll recently, that I would never use wireless, but now I do, and I seem to have run into a problem.

  The computer is (apparently) configured to use wifi, but when I went to turn on the switch on the side of the computer's wireless, it wasn't a slide, but rather as a "on pop, pop off" piece of plastic with no way to 'turn on' the wifi connection.

  Is anyway to turn on internal capacity?
  Thank you
  Laura

  Hello Laura

  As much as I know WLAN card is not available on laptops Equium A60.
  Each laptop with WLAN card model has a WLAN sticker placed in the lower corner. Please check if such sticker is placed on your laptop s down.

• Equium A60 issue of the wireless USB mouse

  I bought 3 optical mouse for my equium A60. The first 2 have worked for a short period, but then appeared to be very erratic, beating on the entire screen and the slightest touch. I just bought a third and spend money on it to combat this problem, but it's always like it. It's a belkin wireless optical mouse. The connection is USB and I have no driver to install. It flies just all over the screen completely uncontrollable. Please can someone help.

  Hello

  Have you checked the pointer options in the properties of the mouse?
  In my opinion, you should try changing the query options to slow down the pointer options.
  In addition, improve it the accuracy of the pointer must be marked.

  Good bye

• My Equium A60 not startup after Windows update

  Hello.
  I have an Equium A60 (PSA67E) about 1 years. There has been many problems with this one recently. First, there was the problem of overheating. The machine would heat up and stops by itself without any warning. I tried many options by keeping the cooling ports clear but dint help not at all.

  I've recently updated my bios version 1.90 such suggested by Toshiba. I always see overheating so far after the bios update.

  The most annoying is the display driver which is in this case a lack of mobility radeon ATI 7000. This would cause the display to become oversized and the resolution is very low. It would go without saying when I restart the machine.

  Last month, I reformatted the machine using the Toshiba Recovery CD. Everything went well until I am passed on the automatic update of windows. The first update coming, and I install and reboot the machine to let it function. He's fine. Comes the second update is installed and I have proceed to restart to allow functional upgrades, it does not start. The machine keeps starting over and over again without loading the OS. The screen is the typical Toshiba boot screen with the yellow light (charger) on the screen and after some time a blue screen is delivered for a short time (I am unable to read this error message it is said) and the machine starts start again. What can be the problem?

  I need to install windows XP SP2, and for this I need to go through the Windows Update. What can be the remedy and on the update of the available display driver. I tried, but it makes the situation worse.
  I used the recovery CD at least 20 times that there is no alternative. I tried to start in safe mode but din't work.

  Hi, Germain,.

  According to your description of the problem it doesn't seem to be anything wrong with what you have done so far, but I just want to clarify a few points.

  1. After installing the recovery CD system you install/activate your anti-virus software?

  2. are you using Windows Update in automatic mode or you manually select the update process?

  I recommend you to turn off automatic error (Advanced tab in system properties) reboot so the system will not attempt to restart when you get your blue error screen. This will allow you to see what error.

  Kind regards

• How to activate the resolution wide screen to external monitor on Equium A60?

  Hello

  I had an Equium A60 with an ATI Radion 7000 mobility grahpics chip in it. Earlier the LCD is dead and has decided to use an external monitor rather than replace it. However, the external monitor is a monitor 22 '' widescreen computer does not provide a display suitable for resolution. Is it possible to update the graphics driver to provide the wide screen formats. I looked on the toshiba updates, but there is nothing new there, and ATI are not ready to support offer it on a laptop.

  Any ideas?

  Hello

  You can't choose your preferred resolution because the graphics driver does not support.
  Eventually the 3rd party driver support your favorite display resolution, but to be honest I wouldn't use these drivers because it could cause serious difficulties for laptop.
  The point is that these 3 third-party drivers are untested and not certified by Toshiba.
  Therefore, the use is at your own risk.

  Good bye

• Equium A60-191: upgrade graphic integrated processor

  Hi, new,

  I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

  Thanks (please answer)
  Thanks again!
  Oh and thanks again!
  Suddste000

  Hello

  as far as I know, it is not possible to update the graphics card in a laptop.

  Good bye

• Equium A60: How to get the display on TV?

  Can someone give me details on how I can get my Equium A60 (with ATI7000 graphics card) display appears on my TV? I tried to use the S-video out to TV s-video but the ATI displays tab said that the TV is not connected. I tried to boot up the laptop with the TV on but it makes no difference.

  Thank you

  It is important to activate the s-video option on some TV.
  Then the TV should show up as connected in the properties of ATI Mobility under the view tab

  In addition, you must use the FN + F5 key combination to switch to the TV

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option

• Equium A60 - missing or corrupt ntfs.sys, please run the installation program

  When starting my Equium A60 I get the answer "ntfs.sys missing or damaged please run.

  When I run the toshiba recovery still disc, it does not cure it and I tried to boot from xp cd and it says no bootable cd in the device.

  I remember that this issue has already been discussed in different threads here in the forum.
  Why you n t use the advanced search option?

  OK I did and found these two threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24051

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  I would be grateful for feedback!

  Greetings