Similar Questions

• Reference Dell Replay Manager with Actifio or well Veeam?

  I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

  Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

  Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

  Thank you!

  You cannot Replay Manager if you go with the Actifio solution.

  Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

  Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

  Some of the main benefits of using Actifio in your scenario would be:

  -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

  -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

  -Data could be kept for more long with of Actifio built in compression and dedup global

  -Instant access to virtual copies of the data from the system of Actifio

• In older firefox if I stop firefox.exe to the Task Manager and start firefox it will restore all my open tabs, now it doesn't

  usually in the earlier version as 28, so I end the process "firefox.exe" task manager and run back the firefox, it will restore the tabs normally I opened (websites that I had until I stop the firefox.exe)
  But now that more recent versions, not give me this feature, restore session screen becomes white and I drop my open sessions.
  I have to use the history to restore the sessions that I lost,

  Please can someone take a look at this problem, it would be an interesting option to stop the firefox.exe in the Manager of tasks and able to restore all the sessions again

  I have attached a picture for your information

  Thank you
  regarding

  Unfortunately the image have no download, but there are built in the back of the inverter session. If these do not work correctly, we are happy to investigate.

  • The problems of Firefox in Mode safe

  However, there is an addon that helps with backups called session manager Session.

• I have install an add-on for Firefox, but it does not appear in my list of Add-ons Manager, and after I restarted Firefox, it went.

  I try to install 1-Click Youtube Video dDownloader, which is supposed to add a download button to Yuotube video pages. I go here:

  https://addons.Mozilla.org/en-us/Firefox/addon/1-click-YouTube-video-download/

  and I click 'add to Firefox '. It gives me the window "install now". I click on 'Install now' and it is said that Firefox has to restart and it will be installed when Firefox opens again. If I click "Restart now" and restart Firefox. Then I go on Youtube, but no button. I check the page of the Add-ons Manager, and I see that it is installed in the extensions. So, if I go to the page and click 'Add to Firefox' once again and restart once again, go to Youtube, the download button IS there, and it works perfectly. But if I exit and restart Firefox, the download button is once again absent, but the extension is always installed. Why this extension works only when I restart twice, and then it disappears again?

  When the button does not appear, but the extension is marked as active, try to reload the page to Youtube without using the cache by pressing command + shift + r to see if that triggers the extension to insert the button.

  If it remains inconsistent, I would like to ask the developer to Add on to their Contact page: http://www.clickvideodownload.com/contact.php

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• I just added a "Add Manager" and now I can't find it anywhere, he hides or IM just not at the right place? Please help, thanks

  I downloaded 'Slims add on Manager' and now I can't find it anywhere.

  {Ctrl + Shift + A}

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• I looked in the addons Manager and I seem to have 5 versions of java installed console, do I have all or can I disable all, but later?

  I see 5 versions of the java console addons, 6.0.04, 6.0.07, 6.0.10 6.0.12 Manager and 6.0.14.Do I need all these or should I disable all, but later?

  If properly uninstalled plugins for Adobe Reader and Foxit Reader should also uninstalled in the process.

  Be careful with the Windows registry, unless you know what you're doing.

  • Always back up the registry to another source; not the current hard drive.
  • Use a program that will offer to back up the registry keys that you delete.
  • Always have a boot disk (CD/DVD, USB key) just in case you make a mistake.

  You can use Windows search to locate the plugin files and delete them if they are on your hard drive and leave the single registry. Find and delete the following files while Firefox is completely closed. After you delete the files, launch Firefox, look at your plugins, addons > Plugins, to see if the two plugins are gone.

  • The Adobe Reader plugin name: nppdf32.dll
  • Foxit Reader plugin name: npFoxitReaderPlugin.dll

  A few links for you to watch:

  1. Foxit Reader:
     • http://www.foxitsoftware.com/support/showfaq_technical.htm
  2. Adobe Reader:
     • http://kb2.Adobe.com/CPS/400/kb400769.html
     • http://www.Adobe.com/cfusion/search/index.cfm
     • http://kb2.Adobe.com/CPS/836/cpsid_83690.html

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• Incompatible Power Manager and driver bluetooth Y550

  I have an old lenovo y550. I recently bought a copy of windows 8 and install it on my lenovo y550. Unfortuanetly lenovo support does not provide drivers for windows 8 for my laptop. I tried to install the driver of lenovo power management and bluetooth but windows 8 says it's not compatible. Please help me.

  Hello

  You can also install this driver in compatibility mode bluetooth or Bluetooth Broadcom Windows software and see if you can now send and receive files on paired devices.

  Broadcom Bluetooth driver

  Windows 7 64 bit
  IN3BTH08WW5.exe
  57.7 MB

  neokenchi

• x 1 problem management and the supply of the carbon battery

  Hi everyone I x 1 carbon 3448

  in these 3 days, I have 2 questions:

  1. There is a warning sign on the right side of my battery meter tells me mya battery capacity is less than 50% of its original capacity.
  2. I can't open the power manager at all. even after the update today, it solves nothing.

  Please help now my laptop cannot survive 30 minutes without load

  You run Windows 7?

  Reinstall the power manager, and then run a battery meter reset.

• HP Laserjet Pro M201dw: "then I explained the problem to management and they said not to buy all the HP printers more."

  Our two new printers Laserjet Pro M201dw are not recognized on the office network.   I have spent hours trying to understand this and posted questions on the forum Support HP, but without response. They became more disadvantages than thay are worth.  And that's enough.  Then I explained the problem to management and they said 'don't buy it not all HP printers more.'

  Thanks for the suggestions.

  I tried to BootP and disable ipv6 on a printer and at first, it worked (finally).  But then, after having unplugged and restarted, he returned to the ip address of connection no.

  So finally, I noticed and changed the setting of the link of "Automatic" to '100TX' speed full - and that seems to have solved the problem of intermittency.  I've converted and turn it back on, unplugged, etc., and it maintains the connection and ip address.

  Do not want to play with something that works, I can't say with certainty if the speed of one link would have solved the problem (probably not), but it seems that while your excellent suggestions finally established a network connection, the setting of explicit link speed was necessary to maintain the connection.

  Thanks for your help in this matter!

• is Tsinternet user group, download manager, and NNTP service does not participate in 2008 if server windows Yes... Please give me the link of reference

  Required link that support it, upload, Tsinternet user group manager and the NNTP service is not longer involved in windows server 2008

  Hi HP_990,

  I would suggest to repost your question in our forums Windows Server TechNet here:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Thank you!