Bluetooth volume goes down at random

Similar Questions

• Win 7 Volume goes down on its own

  It just started recently, perhaps just after an automatic update of Windows, but my volume decreases automatically on its own, at one point, she increased her own but most of the time, it will reduce in volume every 10 seconds or until it is 0%.

  I read some of the online solutions, but none of them does not seem to work for me. I have spent in the Communication tab and check the box 'Do nothing', check all my keys to ensure that nothing is stuck down etc.

  Hello Robert,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with sound or volume in the computer, which decreases after Windows Update. We are happy to help you in the matter of fixing.

  You can run the troubleshooter from the below mentioned link and see if it can help solve the problem.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

  Open the Audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  This problem may also occur due to some third-party programs, the origin of the problem. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Media playback volume goes down when any usb device is inserted (REPORT of BUG)

  Whenever I have plug in a USB device (iPhone / USB key) and I media play (video in the browser / media player / music etc.) device that plays the media has the volume automatically turned down to very low volume.

  While I can increase the volume for the single device that is quite annoying... I have disabled the option of mixer to allow other apps to control the sound, but it continues to impose...
  I think it of more of a bug than anything else, but happy to try and proposed the solution

  Eeek just figured it out

  Sound > playback devices > Communications tab
  Change option to reduce the amount other noises of 80% nothing to do...
  I think that Windows thought my iPhone was a communication device, even if I tried to load ;)

• Volume goes up and down during playback on Qosmio G55-Q802 MP3

  I just bought a new laptop from Toshiba with Vista Home premium.

  When I'm playinh of MP3 files, the volume goes up and down.

  When there is a soft part in the song the volume increases and when instruments of start to play more strong volume goes down.

  Can anyone help me please with this problem?

  Hello

  First of all, it would be really interesting to know which laptop model you have

  In addition, I would like to know if you have tested the MP3 files using different actors

  Have you noticed the same sound problem using WinAmp or another free software?

  Check it!

• Why my volume goes up and down during playback of music on YouTube?

  I listened to a few songs on YouTube channel & the volume goes up and down by itself.  How can I stop this? My computer is Lenovo & its pretty new, nothing wrong with it.  Are there other buttons that I miss?  Do not use to be like this, please help?  I want to just listen to my music without having irritated by this problem :(

  Hello

  1 did you do changes on the computer before the show?
  2. not this problem only occurs when you play music on YouTube?
  3. what browser you use to access YouTube?

  Method 1:
  You can update the latest version of the flash player and check:
  http://get.Adobe.com/flashplayer/

  Method 2:
  You can open Internet Explorer, preferably to a page that needs to play sounds.
  a. click on the volume icon in the windows system tray (in the lower right corner of the taskbar) and then click on the link titled "Mixer".
  (b) a panel will open showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
  c. ensure that belonging to Internet Explorer volume level is set correctly.
   
  Method 3:
  If the problem persists you can perform the clean boot, this problem may occur if a third-party program, the origin of the problem. Placing the computer in a place clean start State and resolve the problem. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  Alternatively, you can perform the steps in knowledge base article:
  The video problems with Internet Explorer
  http://support.Microsoft.com/kb/2532294

  You can also visit the links:
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

• Volume, keep going down

  My cursor of volume under windows 7, keep going down and I tried to change the communication for the 'status quo', but still not working please help me

  Hi GordonCheng,

  (1) since when are you facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the number of brand and model of your computer?

  Method 1: Uninstall and reinstall the \audio card drivers:

  You must be logged on as administrator to perform these steps.

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in Device Manager, locate the sound video and game controller, and then double-click the device name.

  (d) click the driver tab and then click on uninstall the driver, and then follow the instructions.

  Click on the link to re - install the drivers manually

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the link below

  Tips for solving common audio problems
   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• The mid-2010 iMac with 4 bank going down. I have 12 Kingston SODIMM KTA-MB1333 / 4G.

  I have 12 Kingston SODIMM KTA-MB1333 / 4G.
  Checked with Memtest 86 any single bank, without problem.configuratio

  The mid-2010 iMac with 4 bank going down.
  Any other configuration with 3 Bank work perfectly.

  < post branched out by host >

  Forget the RAM Kingston and return it for a full refund, if you can.

  Spec'd correct., tested and reliable Mac RAM DO can be bought online Mac RAM sources Crucial memory, directly from the site Crucial (crucial.com) or OWC (macsales.com).

  Already mentioned several times in this post of the thread.

  Any other RAM from other sources and manufacturers (except OWC or Crucial) is questionable, at best.

  Good luck!

• While using my phone and the battery goes down sometimes while it is on the charger

  While using my phone and the battery goes down sometimes while it is on the charger

  What charger do you use? Which shouldn't happen with the Apple adapter, but it might with adapters that cannot provide informed that the phone needs.

• Connection WiFi to internet goes down

  Hello

  I have a problem with access to the internet. After a few minutes, the WiFi connection to the internet goes down, and I'm not able to access internet again unless I restart the computer.

  I appreciate your help.
  JoPa

  Hello

  It will be interesting to know which laptop mode and wireless network card you have. Now I can just recommend to install the latest driver for WLAN card. If you have the Intel card inside it please visit http://support.intel.com/support/wireless/
  Good bye

• Acer Switch 10 i. put powered w / power cord, power button + volume Up/Down ii. No LED light

  Problem:

  Power does not illuminate. 75% battery charge. A tried
  a. power switch button
  b. power button + volume Up/Down button for 60 seconds (technique of being able to be in hibernation mode)
  c. a/c power cord... light to show load or power not turn on AND the Tablet does not become hot... in other words, Tablet accepts no power coming from being plugged into an electric outlet

  Solutions to be able to put it back on

  1. perhaps central card mother battery died... Well, in the past my LAPTOP would work with single power supply and no battery... but... it is a tablet that works maybe like a mobile phone because if the battery is dead, then unit does not work until the Central battery has sufficient charge

  2. maybe an electrical circuit problem?

  3. may reset a deep sleep mode?   ... but already there is a technique of this situation and I tried it.

  4 perhaps, software power settings but if are unable to start. can't get to the BIOS.

  Thanks much for any help.

  Solution... it was an electrical problem, capacitor w / low-Volt charge had gone below this threshold to function, voltage decay over time.  Replaced.  Laptop as it has done before does not.

• My laptop goes down when I try to play games. Internet works fine however.

  My laptop fell down while trying to play WoW, Civ, RATW, and Spore.I done a virus scan mcafee says the computer is clean. Internet seems to work very well as well.

  Hi DanielWilkinson,

  ·         You receive an error when the laptop goes down?

  ·         Have you updated with the latest drivers?

  Check to see if the following is useful.

  Method 1: Reduce hardware acceleration. To change the hardware acceleration, follow these steps.

  a. Click Start and then click Control Panel.

  b. click appearance and themes. Click on display.

  Note: If you use Windows classic themes, use the next step:

  c. Click Start, click Control Panel and then click view. On the settings tab, click Advanced.

  d. on the Troubleshooting tab, move the hardware acceleration in the second position of the left and then click OK.

  Note: The following message is the description for this slider control position:

  Disable all DirectDraw and Direct 3D accelerations, as well as all cursor and advanced drawing accelerations. Use this setting to correct severe problems with DirectX accelerated applications.

  e. click OK to close the display properties dialog box.

  Method 2: Log on to the manufacturer's Web site and update the laptop with the latest graphics card drivers. In addition, update the last chipset and other updates to the device driver.

• When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.

  When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.  I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection.  If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution.  I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens.  There must be some weird conflicts.  I tried to update the drivers, that made no difference.  Is there a setting Aero or the conflict at stake here?  In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work.  From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again.  Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?

  Change your update settings to find the problem, we > then right-click on > hide.

  And don't do hardware drivers through Windows updates.

  Find them in the equipment or the system direct manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See Update above settings to solve this problem

  See you soon.

  Mick Murphy - Microsoft partner

• How do you get alerts if your mail server goes down?

  I have send and text alerts sent via my server Exchange but is it built to send alerts in case our email server goes down? Foglight has a mechanism to send alerts that do not require a mail server?

  Hello

  Yes... Make sure that the failover on monitoring of Server SMTP is selected in the Config > Admin > SMTP settings area. This will continue to route alerts through our mail server, in which case your crashes.

  Thank you

• 851W w / WPA - PSK - Interface goes down.

  Hello

  I tried to configure WPA - PSK on the router 851W. I followed the instructions using the SDM and properly active wireless WPA - PSK network. I have connected a MacBookPro to the network wireless, with all the features, then after a minute or two, separates the client and Dot11Radio interface goes down.

  I have install a network open without any connectivity problems. I have search the net and forums of Cisco without success for a solution to this problem. Here is the link to the guide: http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_example09186a00808acf2f.shtml

  Any ideas what might be causing the radio interface down with WPA - PSK configured?

  Thank you.

  For some it's IOS version WPA - PSK, which proved to be intermittent. Cisco CSCeh90412 bug describes it. Try to update the IOS version and check.

• If my computer goes down...

  Hello and thank you in advance if you may be able to answer this question for me: if my computer goes down, the media are saved once to install the software on a new computer cd? I still have my installation cd.

  To put your mind at ease, I suggest the following.

  Buy yourself an expansion one (1 GB) (not SDHC) SD card these are cheap at the moment.

  Using the application of media, copy all your Photos on the expansion card.

  They are saved and can even be copied from the card on your computer using a card reader.

  Download and install the free software NVBackup (just binaries.zip) @.
  http://sourceforge.NET/project/showfiles.php?group_id=92189&package_id=186018

  The value of NVBackup to save all the info on your device for the expansion card, it can do all night, even while you sleep

  In the unfortunate situation where your E2 have been totally crash on you, then you could transfer all your data to the E2 after they have been repaired or even another replacement E2.

  The suggestions above to take your computer out of the eqation and I know they'll work because I did it on my TX and I do not own a computer at all the

  All the best, woz of oz

  Message relates to: Palm TX