Compilation of sample of JDE 4.2.1 error

Similar Questions

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator

• Modules of sample in OPA 10.4.2 - error 404 - not found

  Hello
  
  I just installed 10.4.2 OPA but was not able to load the rulebases sample included in the package. I just copied everything compiled rulebases (* .zip) of C:\V35235-01\examples\rulebases\compiled to C:\OPA\web-determinations\web-determinations\WEB-INF\classes\rulebases then re-packed folder web-determinations to create web - determinations.war then deployed to Weblogic. When I tested the site web-determinations, I get "Error 404 - not found". Here are the sites I've tried.
  
  Directly from the deployment of the Weblogic Console test tab - http://localhost:7001 / web-determinations
  New IE browser - http://localhost:7001 / web-determinations/startsession/BenefitCodeExample/en
  
  However, I was able to open the BenefitCodeExample page when I accessed the OPM. I opened the project, and then click 'Build and Run' via Web-determinations.
  
  Can you please help me with this problem? I don't know if I'm doing good how to deploy the rulebases. If this isn't the case, please let me know the right way. Thank you!
  
  Kind regards
  
  Ann

  Are you sure that you create the war file correctly? you will need to zip the contents of the directory of web-determinations and not the directory itself, try to open your file. War and the file war comes with WinZip and compare the content.

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• JDE 6.0 - get error: "__ide_copyfile__.tmp (access is denied).

  Hi, when I click on 'Build' in JDE, I get the following error: java.io.FileNotFoundException: C:\Program Files (x 86) \Research In Motion\BlackBerry JDE 6.0.0\simulator\__ide_copyfile__.tmp (access denied) build complete. Accordingly, any changes made to the codification (of my application) is not charged on the Simulator. The Build in use is working properly and now the above error suddenly. How can I fix it? The version of the simulator that I it running is 6.0.0.246 (9800) thank you very much

  This looks like a problem of permission to the Windows directory. Make sure that the account you are using is able to write to the location specified in the error message.

• Try to compile a Word document, OPA throws incorrect filename error

  When I try to compile a Word from OPM document, I get an error in a dialog: "political modelling Oracle could not open document, such that an error has occurred in Microsoft Word: incorrect filename."

  Can someone help with this please?

  The development of the OPA team posted some troubleshooting tips for people with problems of market OPM 10.4.4 with Windows 8 and Office 2013: https://community.oracle.com/thread/3542454

  See you soon,.

  Jasmine

• Problem compiling with Xcode plugin sample

  Hi all

  I'm having a problem of compiling a sample plugin in the SDK ("BasicPlugin") using Xcode on Mac OS. Xcode build error is "name"CursHandle"unknown type". The error occurs in two source files: AVExpT.h and SafeResources.h. I can't find any header provided with the Acrobat SDK kit that defines the type of CursHandle.

  I'm on Mac OS 10.8.4 and Xcode 4.6.3.

  The SDK documentation says that the SDK is only compatible with Xcode 2.x; elsewhere in the documentation it says that it was compatible with Xcode 3.2 and 3.3. What is the reason for the above error? It is not possible for me to install the old version of Xcode, because I'm running 10.8 OX, and older versions are not compatible.

  I would be very grateful for any help.

  Paul

  Yes, the software SDK still uses characteristic of carbon (even if Acrobat itself does not use anything carbon).   Therefore, you need an older version of Xcode that talks about carbon.

  Consider using a virtual machine from a certain flavor to run an earlier version of Mac OS and Xcode.

• Error during the compilation of the LCCS SDK Flex 4.5 SDK samples

  Hello

  I'm new to Flex programming and exploring the samples provided as part of the LCCS SDK. I'm trying to compile the examples available as SimpleChatExample.mxml in the swf file using the Flex SDK 4.5 compiler (mxml.exe). But I get following error - could not resolve < rtc:ConnectSessionContainer > to an implementation of the component. Could you please help me to find the exact cause of this? This is to integrate the swf file that is compiled into an existing ASP.NET page and to check the feasibility.

  Please guide. Thank you.

  I recommend the following:

  http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7fcc.html
  

  and use the following syntax to reference:

  http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7a92.html
  

  or better still on the command line:

  mxmlc - help list details

  Normally, you will need to refer to this list of options available (even for compc), and then to formulate your command line options.

  Your order will be probably looks like this:

  mxmlc -library-path+=path_to_lccs_sdk/libs/player10 -source-path+=src src/MyApp.mxml
  

  Depending on your needs, you will need to play with "- include - libraries" and "- external - library-path" params as well.

  Hope that helps,

  Alex G.

• JDE 5.0 does not work

  Hi guys.

  I downloaded and installed JDE5.0 yesterday. Then I compiled package samples and he ran. Samples of applications Packager has worked well.

  After that, I created my project in the workspace of the samples. Then I get Error Message "Untrapped Exception Detected" when I compile and run on the Simulator.

  You have the same problem like mine?

  How to fix?

  Thanks in advance.

  Yep,

  When this prob occurred first, I uninstall (removed BlackBerry JDE 5.0.0) and reinstall.

  Then I compiled the app. Compile the second time, occurred the prob again.

  In fact, I reinstall several times (4-5).

  It seems that it is very complicated for me.

  Then I have another way to correct. It's research in Motion\BlackBerry JDE 5.0.0\simulator\clean.bat

  (Also turned off antivirus)
  

  After that I started several times (3-4), "Uncaugth exception" didn't happen again.

  Hope this helps to another that has the same prob like me.

  -Raiden'

• tables of fixed size in FPGA compilation error - how to implement a waveform control in an FPGA?

  Hello

  After being stuck for two days, please let me briefly describe my project and the problem:

  I want to use the cRIO FPGA for iterative control of waveforms. I want to capture a full period of the waveform, subtracting a reference waveform period and apply control algorithms on this. Subsequently the new period of correction must be sent again for the output module OR. If it does not work, the captured waveform will look like the one reference after several iterations.

  I am planing to create an array of size fixed for the capture and the reference waveform (each around 2,000 items for a given period). I use so 2 paintings of each elements of 2000. I use the function 'replace the subset of table' to update each element captured in the loop sampling and a feedback for each table node to keep in memory (I also tried shift registers, but then the berries do not have a fixed size any more and I can't start the compilation process).

  If I try to compile the FPGA vi, I get the following error:

  Details:
  ERRORortability:3 - Xilinx this application runs out of memory or met a memory conflict.  Use of current memory is 4167696 KB.  You can try to increase physical or virtual memory of your system.  If you are using a Win32 system, you can increase your application from 2 GB to 3 GB memory using the 3 G switch in your boot.ini file. For more information, please visit Xilinx answer Record #14932. For technical support on this issue, you can open a WebCase with this project attached to http://www.xilinx.com/support.
  "Synthesize - XST" process failed

  Before I added berries to my code I could compile the FPGA without problems. So, it seems that the tables are too big for the FPGA. :-(

  Therefore, I would like to ask if there is perhaps a better method to implement my problem in LabVIEW FPGA? How could avoid the tables to save my waveforms on a period?

  Thanks a lot for your help in advance.

  Best regards

  Andreas

  Unfortunately, the LabVIEW FPGA compiler cannot deduct stores shipped from berries (yet). When you create these two large paintings, you are creating essentially several registers very, very large. Just by looking at your picture, I guess that there are at least 4 copies of each of the tables.

  You want to use LabVIEW FPGA memories instead. You can create memories outside the loop and then read/write them where you are currently referencing the berries. The only change that you really need to do is to break down your treatment in scalar operations. I have attached a simplified version of your plan, I hope it helps. Let us know if you have any other questions.

  

• compiler Java has failed:

  I know this must be a simple solution, but I am new to Java. When I try to compile the Hello World program I get:

  Error! : error: failed java compiler: javac - 1.3 source-target 1.1 - g - O-d C:\Users\Chris\AppData\Local\Temp\rapc_29286710.dir - bootcla...

  I have configured my way through the control panel and still nothing. Any help would be greatly appreciated!

  Get a sample of work here request:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=17514

  and try to compile it.

  The compiler works now?

• BlackBerry JDE Build Error - new installation - Hello World

  I'm new to the Blackberry development.  I was able to get Eclipse works without any problems whatsoever and I built a few sample programs and one of my own.  However, it seems to me that RIM Blackberry JDE has some nice features for the visualization of information specific to Blackberry batteries, memory statistics, etc. Then I tried to get the RIM Blackberry JDE 4.5 and 4.7 installed so I can revisit.  I had some problems installing a reason any.  I've gotten past these problems, but I'm starting to get the headache trying to build "Hello World".

  What would someone mind helping me resolve the error of next generation for 'Hello World '.  It will probably take something simple and I feel stupid, but I have to finish reviewing the RIM JDE so I can select my development environment and begin to develop.

  Building helloworld
  D:\Program Research In Motion\BlackBerry JDE 4.5.0\bin\rapc.exe-silencieux import ="...... \.. \Program Files\Research in Motion\BlackBerry JDE 4.5.0\lib\net_rim_api.jar"codename = helloworld helloworld.rapc warnkey = 0 x 52424200; 0 x 52525400; 0 x 52435200 D:\Temp\HELLO\helloworld\com\rim\samples\helloworld\HelloWorld.java
  I/o Error: Cannot run program "javac": CreateProcess = 2 error, the system cannot find the file specified
  Error while building project

  Thanks in advance!

  (You must make sure that) that you have installed a suitable JDK, and (b) in the JDK bin directory is in your Windows PATH environment variable.

  Open a command window and type javac

  If it is not found, the JDE cannot find it either.

• To display the option/Hide keyboard in storm of BB + 4.3 JDE

  Hi all

  my project is to build on 4.3 JDE. It works fine on the device version 4.3 and higher. When I install this same build the BB Storm that even I don't see the option to hide or show the keyboard. For this, I have compiled my project in JDE 4.7 and now I see these options.

  But the problem is I want to keep just one generation. and the obligation for versions 4.3 and higher. so I don't want to keep two different builds.

  Can someone suggest a solution.

  If you use the search button and search for 'compatibility mode' you will find numerous threads on the subject.

  Here's one of many:

  http://supportforums.BlackBerry.com/T5/Java-development/sticky-quot-compatibility-mode-quot-issue-on...

• Error in compiling the example of Indesign CC 2014 project

  Hello

  I'm trying to compile the sample project to 2014 of CC of Indesign using VC ++ 2013. but it shows me the following error:

  "error C2039: 'assert_not_arg': is not a member of 'boost::mpl' (...) '. \.. \.. \source\sdksamples\basicmenu\BscMnuSuiteLayoutCSB.cpp) D:\Adobe InDesign CC 2014 SDK\external\dva\third_party\boost_libraries\boost\iterator\detail\facade_iterator_catego ry.hpp"

  Build result shows also 'compiler version unknown - please run the configuration tests and communicate results'.

  
  

  I added after path in "properties of the project-> VC ++ Directories-> Include directories.

  D:\Adobe InDesign CC 2014 SDK\external\dva\third_party\boost_libraries

  D:\Adobe InDesign CC 2014 SDK\external\dva\third_party\adobe_source_lib

  Please let me know if any settings I need to change in 2013 VC ++.

  I use the application Indesign CC 2014 and 2013 VC ++ and the operating system is Windows 8

  Thanks in advance,

  Priyanka

  As mentioned in the guide to porting Visual Studio SP4 2012 is necessary on windows. You can build sample VS 2013 by changing your project to V110 but V110 available tool only if VS 2012 installed on your system means that in all cases you Visual Studio 2012.

• Why 'Read a fixed number of samples' help with the error 200279?

  Hello world

  It is a question about a tip found in the explanations on the acquisition of data error-200279. This explanation it is said: '... ". reading a fixed number of samples instead of all available samples can fix this... »

  AFAIK the DAQ system buffer is a ring buffer, so we can consider having a writing position and a position of reading "in motion" along the ring. While the playback position is the position of writing, everything is brilliant. But if writing catch up reading, samples will be overwritten and therefore-> error-200279.

  So here's my question:

  I do not understand why a fixed amount of reading samples would help me with this error. I don't understand why other Councils (increase in the size of the buffer or the frequency of reading) would help me because they reduce the probability of the playback position being outrunned by the position of the writing.

  But if I read everything which is available, whenever I read the only way for the buffer fills would be that the time between two readings take more time than necessary fill the entire buffer.

  Or in other words to each reading I will read at least as many elements that it has been filled by writing since the last read, so the only way to fill the buffer would fill completely at once since the last reading.

  This should be a lot safer than reading a fixed amount, because in this case, I'd get a problem if I read it that fewer items than writing complete at the same time, regardless of the number of items that would be and no matter what the size of the size of the buffer that would be.

  What I understand here?

  Thanks and regards,

  Sebastian

  SBach wrote: this VI is a State Machine in queue, the reading part is made in the case of timeout and cases are used as initialization orders, stop and change the outside DAQ hardware.

  That I can't tell when these commands will trigger the time between two readings could not be set. If a strictly fixed amount of data could lead to a buffer to fill.

  Init command: you certainly don't have a running task.

  Stop: You stop the task, then doing here if you get overrun.

  Edit tasks: you will probably need to stop the task still before you can edit the task, but let's go back to not caring.

  The way I see it, the other commands must stop the task anyway.  If you can leave the timeout do its job and do not do a lot of extra stuff.

  And here are some alternatives:

  1. use a shift register to keep track of how long your wait time should be.  In the case of reading, make the deadline to be whatever it is that you are using.  In all other cases, only the 0 so that a read timeout must be performed immediately (once the queue is empty).

  2. When you do your check to 1.5 times the timeout, if there is too much data, queue a reading at the front of the queue so that playback will happen.  The idea is that you really want to keep the same stack sizes to keep the memory to be allocated.  So just to be read more often.