Compile the file .as amxmlc problem

Similar Questions

• Age of Empires 3 error 0003: could not compile the file 'aiLoaderStandard.xs '.

  People,

  I bought the version of digital download of age of Empire 3 full of steam for installation on my laptop Windows 7 Home Premium. Already, I have the CD versions of all games on my desk, but was also able to install it on my desktop in my Steam account.

  In trying to play the AOE3 game on my laptop, I get the following error:

  00:00:00 (0) xs: error 0003 could not compile the file 'aiLoaderStandard.xs '.

  The net effect of this error is that when I run the game, the AI does nothing. He can place a hometown and a Explorer and/or civil, but they do nothing. I tried to uninstall and reinstall the game several times. I also applied all the patches I could find, to include the last being.

  In addition, when you try to play the TAD version, I do not get the aiLoaderStandard.xs error, but it fails to load the map and never even begins.

  Help, please!

  Hello

  You can view the proposal contained in the link, and check:
  http://Forum.AgeCommunity.com/forums/thread/480165.aspx

  If the problem persists, you can create a new thread in the forum for better support.

• The chart to the file. DImension problem

  Hello. I have a problem a XY chart from the files. I managed to establish a curve, but I need 3 charts plotted on a XY Chart. I have 4 txt files with tables 1 d (just a single column) of data. 1: the values of X, the rest 3 values Y. could you please answer what is the error in my diagram and how to solve?

  In essence, nothing is correct on the block diagram. If reading worksheet allows you to return a 2D array, you must use the Index Array function to get a single column in a table 1 d. You use the subset of the array that returns a 2D array that is clearly visible. However, you can make things much simpler using playback of the sheet in the correct manner. Set the entrance to transpose to True and take the exit of the first row. It is a 1 d table.

• InDesign CS5, cannot open the file due to problem with plugins

  Hi people!

  I am running Max OSX 10.5.8 and I am currently using a trial version of CS5 (Design Premium) while work sorts of money for the upgrade.

  I work in-house, and I needed to send a work file to an external design agency. I saved the file in CS5. The Agency has CS5. When they open it, they get an error message saying that they do not have the necessary plugins to open it. We never have any plug-ins, I'm not aware of anything that would come the trial who do not come with the purchased version, so I don't know what to do.

  Is it possible to save a file without saving these 'plugins' with it? Or is there something else I can do?

  Any help much appreciated

  linziloop wrote:

  No, they have a pretty large agency, they certainly have CS5, bought right out.

  This is not typical of an important agency in my expereince. Ask them to confirm the version number.

• Size for the file booklet printing problem

  Hello folk forum!

  While developing a PDF booklet for printing to the local copy shop, I came across a problem, I feel that I've not had before.

  When I "export" my document of 28 pages in PDF format it is about 27 MB, which is logical. However, when I use the option "print booklet" my record is rather 2.2 mb. Of course, the PDF booklet looks like garbage and export non-carnet seems.

  Is it possible to choose subsampling for the print booklet option? I can't seem to find an option to do this and with the help of Indesign files do not really mention that.

  Any help would be appreciated. Thank you!

  Matt O.

  You need not touch the Distiller.

  In the print booklet dialog box choose print settings, in the dialog box that is generated, choose printer Adobe PDF 9.0 for a printer, you choose 'PDF options' and you can set what you want.

  It is kept by document but you will need to make a "Preset" If you want to use it in others.

  

• PHP cannot read the file [was: PHP problem!]

  Hey all,.

  I have a form on my site that saves the information in a .txt file that appears on different pages.

  My problem that I ran into is the following:

  On the pages within the /membersonly (where the form of php and .txt files are located) information is displayed correctly

  On the pages in the rest of the site, I get php errors.  I tried to run php get for files in the /membersonly area, but this does not seem to make a difference.

  Here are two pages, one that works and one that doesn't.  Check out the code on these pages and see if you can find what I'm doing this wrong or absent.

  http://www.hondovfd.org/apparatus.php

  (this one has problems)

  http://www.hondovfd.org/MembersOnly/login.php

  (this one works very well)

  Thanks for all the help!

  [Thread placed in Dreamweaver Application Development forum moderator and edited for clarity subject line.]

  davidmsilver18 wrote:

  I am still confused as to why the pages in my area /apparatus do not work.  How can I create a path relative to the area of /membersonly if I'm in a different folder on top of my site?

  If you use PHP, you need to learn some basics of HTML. A relative path using... / to go up a level.

  $filehandler = fopen('../membersonly/month.txt', 'r');
  

  The alternative is to use an absolute path, that will work independently where the script is. Judging by the error message, this should be:

  $filehandler = fopen('/var/home/hondovfd/hondovfd.org/www/membersonly/month.txt', 'r');
  

• How to compile the files in c ++ in the Terminal? Where to find the Makefile?

  Hello who can help

  I have three files in a directory as follows

  IntRateCalculator.h

  IntRateCalculator.cpp

  main.cpp

  my book shows me something like this

  $ make

  GCC - c IntRateCalculator.cpp.

  GCC - c main.cpp.

  GCC-o main.o IntRateCalculator.o rate function

  I tried these welcome in the terminal, but they have not worked and terminal showed me errors. Then I realized later that I need to use the makefile provided on a UNIX platform so that it to work.

  So where and how do makefile?

  Thank you very much for your help!

  Hello BingZL,

  What kind of errors do you have?

  However, it is a debatable issue. You should find a new book, because these commands will not work. You need a Makefile before running. You'll need Xcode or the tools command line, nothing to do with C++.

• Having a problem to recognize the file using the utl_file package...

  Hello
  
  I use utl_file utility to read the CSV file, utl_file.fopen function is useed to open the file. The fopen function has three input parameters, the second parameter is the name of the file. My problem is that I need to read file on a daily basis. The file name will be like:-DDMMYYYYHHMISS. Last six characters are for the hour minute second generational file. If the name has only DDMMYYYY then I can give the name of file as TO_CHAR(SYADATE,'DDMMYYYY'), for an individual the same date throughout the day. But the hours, minutes and seconds will be time when the file is generated, it can be different for different days. In this case how can I normalize the value for the filename parameter in the function fopen.
  
  Thanks in advance.

  Similar to the jeenesh solution:

  declare
   fexists boolean;
   fname varchar2(20) := to_char(trunc(sysdate),'DDMMRRRR');
   ......
  begin
   . ...
     for i in 1..24*3600 loop
       utl_file.fgetattr(location,filename || to_char(to_date(i-1,'sssss'),'HHMISS'),fexists,file_length,block_size);
       if fexists then fname = fname || to_char(to_date(i-1,'sssss'),'HHMISS'); exit; end
    end loop;
  .... --- now you can open the file with above found filename
  
  end;
  /
  

• 16 AIR cannot install the file API product

  Hello

  I have a problem with the new LOOK 16. I'm not able to install files IPA produced by this version, installation always hangs and must be cancelled.

  

  My device is iPad, iOS 5.1.1 PC Win 7 x 64 + Flash Builder 4.7. I tried the two stable 16.0.0.272 and Beta AIR 16, the problem is always the same.

  I tested all my projects and all have exactly the same, I even tried to create simple Hello world package and it also has the same problem. I also tried to get new mobileprovision, but the problem is the same.

  If I switch to any previous air (13 / 14 / 15) the package can be installed without a problem and works fine.

  Thanks for the info,

  If needed I can provide examples of projects etc.

  Jiri

  I emailed with Chris Campbell about it and he said they dropped support for iOS 5 a year ago. However, I and others have been able to compile the files IPA which works wonders on the original iPad up to the latest versions. Even early versions of 16 AIR works great on the iPad 1.

  He said that he would ask for more information and get back to me. Hope he can clarify this point and that support can be back in because the transition to 64-bit should still support 5.1.1 iOS which is what iPad 1 is running.

  IPhone 3gs and iPod touch 4 still work very well with iOS 6 and like the iPad is on the same hardware wise, it should always be supported.

• I can't access the files under a specific user name, no password

  original title: access files

  Received the infamous "blue screen" error  Installed new hard drive and Windows XP Pro.  Installed old drive "blue screen" in a "pregnant" so I could access the files.  Only problem is that I can't access the files under a specific user name, no password.  All of the suggestions.

  In a situation like yours, you need to "Take Ownership" files that you can access on your old disk:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• You cannot change the file association for .exe owner program

  Just bought new Win 7 Dell desktop running Home premium OS from an old XP computer file transfer.  I am a developer of s/w using a proprietary application that compiles the files of .xpa.  Using 'open with' when I try to associate the file .xpa at our request, it does not.  Instead:

  1. the request does not appear in the list of programs to associate even if it has an .exe file extension

  2. when I click on the .xpa file that I want to associate with the application, it is to be associated with a Windows Media file

  Don't know what to do.

  Thanks for any help.

  Hello

  The question you have posted is better suited for the MSDN forums. For help, please contact their help support team.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  It will be useful.

• Error when compiling .java file

  Hi all

  Controller extension, we did it to our customer.

  When I am trying to compile the code with this command: javac xxchOrderLineDetatilsCO.java

  This is comping the java code and create the .class file but when I try to open this page before oracle then I get the error message below.

  "This class has been compiled for a newer version of the JRE.". The version expected 50.0 51.0 found. to oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)... »

  I did some research on google and found the syntax below to compile java code.

  javac-source 1.4 - target 1.4 filename.java

  I used this syntax and code compiled with warning but it created the .class file and I was able to view the changes on the page at the front end oracle.

  I get the warning message when I use this syntax below.

  «WARNING: [options] bootstrap class path not defined jointly with - source 1.4»

  1 WARNING.

  Also what syntax would be one that suits to compile files .java to create the .class and which does not have the warning message indicates.

  Thank you.

  You environmental source file before compiling the file in the server?

  I think that if you the source of the file env before compiling, it should be fine if you just use javac .

  Reference:

  How to "Source in the environment file.

  See you soon

  AJ

• Illustrator 2015 CC can not read the file

  Yesterday, I created a few illustrations in Illustrator CC 2014. Saved the file. No problems.

  Today, I upgraded to Illustrator CC 2015 and it seems that 2015 is unable to read the file I created yesterday. The file open, but is just a blank canvas that can be expanded, moved or modified.

  -J' reinstalled illustrator. Problem remains.
  -J' sent the file to the computer of the order, he opened in his illustrator of 2014. I edited the file, saved and renamed, return to my computer. Problem remains.

  Has anyone encountered this? Any difficulty?

  Update: OK, so no .ai files will open...! WTF?

  Disable the GPU acceleration in preferences and check your color management stuff.

  Mylenium

• The files HAVE as links within a file, indesign to then be a pdf file, problematic?

  I want to know if the files have linked to an indesign file, which must then be PDFed for the printer, problem somehow. I was always asked by my printer to have all my images within a PDF, CMYK value and saved in tiff format.

  It seems that they should not be a problem, and that by converting the format tiff s i just lose in detail and it being a chore, as I have over 150 images.

  Am I wrong?

  art of John Johnson says:

  What is a manual operation? where in illustrator I convert individually these or make me an option within indesign to do this to all the links of the eps?

  You can record an action to save as .ai and close the file, then run that in the form of lots on a folder of files. But I do not convert batch if I am preflighting. When I control upstream I open all the files, look for problems and potential problems, sync (if any) color, perform the action to remove unused items from the Panel, then save as a new file. I have always save as .ai with PDF compatibility and, if possible, check that all images are linked not shipped.

  Read my file for a file sizes have 370 Ko or there abouts, looks small (although we're talking here of line, maps, etc).

  But I can read is inside my document setup, under 'Transparency' my balance pixelation/vectorization is 75 (in the direction of vector), my resolution for line art & text is 300ppi, gradient and mesh is 150ppi. don't know if I'm just throwing numbers at you, but that's what I got.

  Those are the values by default of the effects of rasterization resolution (for example effect > esthetics > Drop Shadow) and gradient meshes are pixelated when you print or save a PDF file. I usually set up a predefined custom flatterer who goes completely to 100% and does not plan type or convert lines to fills. These are used for priting and record in PDF format only. Your .ai file contains a PDF high resolution whose Illustrator unknown when editing but that InDesign and Photoshop use to import.

  The size of the file is irrelevant to the resolution of the built-in images. 370 KB is quite small, however, and when combined with your description of the content gives heavily to think there is no raster elements, so nothing to sweat. You can open the links Panel to see if there are images embedded or linked. I expect none.