compile the Starter exe

Similar Questions

• Can I change the starting EXE via FTP?

  Is there a way to manage the startup on a T target application (specifically cRIO) through file management?  Is there a configuration file that specifies the startup application?

  I would like to download several exe files to the target and then allow the user to program the application parrir start a GUI I wrote.

  I looked in the files, is not evident.  And research here at NI.com makes me nowhere.

  Looks like there are several ways for a program to run at startup. According to the KB, I found that you can have several VI move on boot and allowing that a startup application (.rtexe) will replace all starting screws; only the executable file will run. The start screw will not attempt to run. Feel free to read more below.

  http://digital.NI.com/public.nsf/allkb/CD3C7A3F58CBBAAA862570F8007D8D06

• How can I prevent the WKUfind.exe that appear on my screen why I start my pc

  How can I prevent the WKUfind.exe appearing on the screen when I miss my PC?

  Hello

  1. what version of Windows are you using?

  2 have had any changes made to your computer before this problem?

  Perform the following methods and check if it helps.

  Method 1:

  I recommend placing the computer in a clean boot and then check if the problem persists or not.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• completed the explorer.exe process and also can't start Task Manager

  Hi, I have a Toshiba Netbook, in which I inadvertently done the explorer.exe program, and now I can't even start the Task Manager because the keys ctrl + alt + delete does not work, and I can't turn off because it has been set to mode standby mode when it is turned off!

  Press and hold the power button for 8 to 10 seconds.

• At the start, I now get the message: AGMailAgent.exe

  At the start, I now get the message:

  Windows cannot find 'AGMailAgent.exe '. Make sure you typed the name correctly and then try again. To search for files, click the Start button, and then click search. »

  As I haven't typed anything at startup, I'm a bit puzzled by this message. Also, I don't know what the message refers. Can help you, please?

  According to the website Agics, it is associated with Virgin Media. You are able to boot into Windows after the error? That seems to be with the program to backup stuff V. You may need to reinstall the software due to corruption.

  I hope this helps.

  Jim

• Why lsass.exe consumes resources after the start?

  Lsass.exe turns 15-20% cpu level for 10-15 minutes after the start.  I have a fast, dual-core machine and the latest XP.

  Hello

  "lsass.exe" is the local security authentication server. It checks the validity of the user on your PC or Server logons. Lsass generates the process responsible for authenticating users for the Winlogon service. This is done by using packages of authentication such as the default, Msgina.dll. If authentication successful, Lsass generates the user access token, which is used to launch the initial shell. Other processes that the user initiates then inherit this token. More information

  Note: The lsass.exe file is located in the C:\Windows\System32 folder. In other cases, lsass.exe is a virus, spyware, Trojan or worm!

  If you suspect a viral activity, and then run Microsoft Security Scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I hope this helps.

• get the Octoshapeclient.exe: cannot start error message everytime I turn on my pc.

  My computer is running slow so I uninstalled programs and deleted all my files, now I get the Octoshapeclient.exe: impossible to launch the error message every time I turn on my pc, I have Vista.
  I ran a Spybot scan and a scan of Norton, continues to receive the Octoshape error. Please advise next step. Thank you!

  Hi Diane,

  Thanks for posting this question in the Microsoft Community.

  1. have you updated to Service Pack 2 installed?

  2. when exactly you get this error?

  Follow these methods.

  Method 1.

  Start the computer in safe mode and run a full scan of computer viruses.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Additional information.

  Is my PC infected with virus or spyware? : http://windows.microsoft.com/en-in/windows/is-my-pc-infected-with-viruses-or-spyware

  Method 2.

  We can refer to this article and check if that helps.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-in/windows-vista/optimize-windows-vista-for-better-performance

  Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with this problem of Windows. We will be happy to help you.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• SOLUTION EXPLORER. EXE must always run at the start of the TASK MANAGER after the LOGIN/WELCOME screen.

  Trying to restore the empty desktop icons by the recommendations, I have a white screen with a pointer after login and WELCOME screen.  CTRL-SHIFT-ESC gives me the TASK MANAGER. and I returned 'explorer.exe' I then the full desktop with white icons.  I need to do this every time I have start or restart the PC. I checked the regedit and the only entry to WINLOG, SHELL is "Explorer.exe" any ideas about a problem?  Thank you!

  Hi Eric1029,

  You can check if the following registry entries are correct.

  a. open the start menu, in the search bar type regedit, and then press ENTER.

  b. navigate to the following location and check the entries for "Shell" and "Userinit" on the right pane:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  "Shell" ="Explorer.exe" (REG_SZ)

  'Userinit"="C:\WINDOWS\system32\userinit.exe '.

  c. also check if you have the correct permission for this registry key (winlogon)

  d. right-click and select permission. Make sure that at least with that you have group administrators, system and installer of confidence with full control and users group read permission.

  e. check if you are able to launch explorer.exe in the window running in the Task Manager.

  Important: The above method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After you restore rundll32.exe, I restarted my computer all the icons on my desktop and all programs in the start menu disappeared

  Every thing seems to have returned to normal, but when I restarted my computer all the icons on my desktop and all programs in the start menu disappeared, and yet, all programs are always in: Control Panel > add/REMOVE programs.   I can still connect to the internet by going to-Start > my computer > view > go to the desktop. How to get back all the icons on my desktop. I tried a click right, but in vain. I also ran a scan complete antivirus. any help would be appreciated.

  Thank you Joel S. Before I could put your advice into practice a friend recommended a friend who advised me to do a system restore, which he said he would be happy to do it for me. So look like an easy option, I agreed. It seems to have solved the problem (fingers crossed), but now it seems that I need to format the hard drive. If you have any tips on formatting hard drive I'm all ears. Thank you Owen

• C4580 install disables the XP firewall and internet access for 3 minutes at the start of the PC

  After installing C4580, when I turn on my Dell Inspiron C510m, XP tells me that the firewall is disabled, I can't access to the internet or even my router nor can I use the Applets in Control Panel that could help me sort these things. After 3 minutes, the Firewall WARNING disappears and everything is fine, but none of the updates antivirus and software update checks performed and I have to perform these tasks manually. The printer works fine, but it worries me that this behavior indicates a potential vulnerability - it's like something kept the door open to let the unpleasant things in the computer. Uninstall the HP software solves the problem, and he re - install it reminds me once again. There is something hanging in a HP driver at startup?

  PeterM

  I found the answer to this one, if anyone is interested, even if the solution required a work-around on the way. Suggested HP support I have just uninstall and install software downloaded from their site (PS_AIO_04_C4500_USW_Full_Win_enu_120_210.exe). This indeed solve, and another problem I had (see network & Wireless forum), but this download is missing the software package I.R.I.S. OCR, presumably for reasons associated with 3 rd-party lisensing. HP support insisted that this download was the OCR, but the OCR .exe is certainly missing. Workaround needed to go back and re - install the CD software, then uninstall everything except the OCR package (you can do), then install the downloaded version. My PC still takes too long to start, but it's probably the combined effect of each software package, I never installed wanting home phone so that it loads.

  PeterM

• How to block the helppane.exe in windows 8.1

  Hello

  I am not able to find the solution online for the pop-up windows coming up every time when to connect to the machine. HELPPANE.exe poping continues upward and am not able to type. The shortcut keys to activate automatically and not may not work in other applications

  Kindly advice

  Thank you

  Tushar solange c.

  Hi TusharSawant,

  Thank you for your response.

  Here is a link to help you get into Safe Mode. Safe mode of Windows 8.

  You can also access the Safe Mode by pressing the F8 key about once every seconds after turning on the laptop computer. This presents the advanced boot option, select Mode safe mode with networking"

  At the command prompt type msconfig and hit eneter

  On Services tab check hide all Microsoft services

  Click on the Startup tab

  If you can locate the helppane.exe, uncheck the box and click on apply.

  Restart your computer as normall.

  If you are unable to locate the helppane.exe, repeat the process to start msconfig

  Hide all microsoft services

  Click on the Startup tab

  Disable all

  You can go back and allow one at a time until you have located the file at the root of the problem. Once you have found, check all those remaining in the start menu, but let this one off.

  I hope this helps.