Similar Questions

• I am running Vista SP2 64-bit, I'm trying to dl/install updates security 5 and get a 8E5E0147 error. Help, please!

  I am trying to download an update of safety for IE9 (KB2675157) and four updates of security (KB2585542, KB2598479, KB2584146, KB2665364).
  I used Microsoft Fixit.  I did a clean boot.  I disabled my anti-virus and firewall.  I tried to dl/install KB947821 but it crashes after the display of 50% complete.
  Help, please!

  Hello

  1 did you changes to the computer before the show?

  2 have you tried this Fixit?

  Method 1: SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2: Manually download the update in safe mode with network, restart your computer, Place the computer in a clean boot state, install the updates and see if that helps.

  Step 1: Safe Mode:
  Reference: Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Download here: http://www.microsoft.com/en-us/download/default.aspx

  Step 3: Here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 3: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  Keep trying. But first, I restart the phone.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If she agrees not always the fingerint, reset all settings. No data is affected, but you will have to re-enter all the parameters of the device and the phone will restart on its own. Settings > general > reset > reset all settings.

  Always make sure your finger is clean, free of any oily substance and the same goes for the home button on the phone.

• Liteon Cd ROM completely lacking in 'My Computer'. Help, please! (Someone... Please help!)

  Hello.  I tried to contact the OEM directly, but it has been a week and no response.  I hope someone can help me please.  I copy the email below.  Because I sent this e-mail, I found more "evidence" of the prior exestance of CD ROM  Although it is completely zero from 'My Computer', there are a lot of drivers on the computer for him and now I don't think it's the drivers. I don't know what to think, really. "Here are my new results: in Device Manager, under" Liteon CD ROM "(always with an exclamation yelloe on this subject) I tried to run the"Hardware Update Wizard"for her, and I got this response: the wizard did not find a better match for the material that the equipment currently installed. When I look under 'properties', he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. When I click to troubleshoot, I get the same message ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »).  He (Liteon CD-ROM) is not listed under "config/system/system information system summer/components/multimedia/CD ROM '-there's just an empty space next to"CD ROM ". Even that in "my computer - it's gone."  The CD ROM will not work, but the light is on and it wil eject and accept a disc, but it will not read it. Please look at my email below and please email me with any questions or recommendations. I can't take another sleepless night, trying to "find my CD lost.  It can be a very simple solution - I hope so. But in all honesty, I really don't know what the problem is.

  Dear Sirs,

   

  I'm really, really hoping you can help me. I'm about to lose my mind trying to figure this out by myself.  I can't find a more appropriate contact you, so please forgive me if this isn't in your area or service. If that is the case, Please before my email to the section within your company and let me know. Everything on the official Liteon site I found and (tried to) read is in Taiwanese, and I am unable to read or translate.  If you could (have mercy on me) so help me or point me in the right direction - I would appreciate it very much .  I tried to understand what I have to do for 2-1/2 weeks and I have spent too much time on this when I should be spending time with my kids! :).

   

  My problem is the following... Recently, I ran a clean up/duplicate file registry cleaner program (ARO) and it seems also removed some vital and very much needed files, extensions, drivers, programs and who knows what else.  I had to download several other programs, file extensions and drivers from scratch, in order to get these things working again. But I can not for the life of understand me what to do with my Liteon CD-ROM. I also used the registry cleaner deletes "duplicate files", and after researching (too late), I found that it often confuses some files as duplicates when they are indeed not the same - post or file descriptions are very similar, or disable a single number or letter. I lost a lot of my pictures as well, and I'm heartbroken over. Anyway, the biggest problem I've noticed is that my CD ROM (Liteon CD-ROM LTN486S) will not work. It happened immediately after the registry cleaner 'cleaned' my folders and things - so I guess that's the culprit.  In fact, my computer is not recognizing even the CD ROM at all. It of Completely disappeared-MIA of 'Information/system components' lacks content 'My Computer' and when I try to update the drivers in the only place I can find that show the CD ROM (but with a large yellow explanation
  ! Mark) - in the "Device Manager" , I get the error: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Then, when I right click on it and select "Troubleshoot to start the troubleshooter for this device", I get the same error: ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »). Track only of it (that I can find anyway) is in the 'Device Manager', where even once, it's a big yellow exclamation on the "Liteon CD-ROM LTN486S" here.  It is the only piece of evidence that it ever existed. I've looked everywhere I can think of, in places that I didn't know existed. I've looked everywhere on the internet for the driver for the "Liteon CD-ROM LTN486S' updates but unfortunately, I can't find. There are a few items that refer to the "OEM".  For some reason, I think it's the drivers, but I'm not computer very well informed. It could be something completely different. I wish I could uninstall info CD (only) existing Liteon I can find - and reinstall everything from zero (even do this? Please, tell!). Then... I thought that I contact me Liteon and ask for the drivers. It's at least a Start.  Could you tell me if there is something else I should do or review.
   
  My system info: I have a (Compaq Evo) Windows 2000 Professional SP3 XP. For what it's worth-(if this is important) it's a NIC PCI 32-bit, Intel Pentium 3, 700 MHz, 128 MB total memory, 20.0 GB hard drive, CD-Rom drive, CD - RW drive, 56 k Modem and 10 / 100Mb... (whatever the devil what is). Microsoft Update is in place and worked (automatically), and my system is "up to date" as far as MS is going. Help, please!  I don't know where to another look or what else to do. Please, please... Please advise.
   
  I thank very much for any help, information, recommendation or reference you can give. Maybe you have a safe and wonderful holiday season.
   
  Jenifer Williams, 39...
   
  Amazing MOM, amazing nurse
  A lot of email from Google and shopping experience :)
  Skills very little mundane
  (But quickly learning by trial and error
  !)
  SC, UNITED STATES.
  Favorite (only known) language: English
   
   
  Thanks again!
   
   
  .

  You're welcome, and good luck!

• I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  Hi Shaji,

  You are referring to the methods mentioned links.

  Method 1: Fix Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search?WA=wsignin1.0

  Method 2:

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  For your reference:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helped!

• I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  Hi debg25514049,

  You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

  You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

  Kind regards
  Nicos

• I try to download my first pro, but the installation is terminated at 84%, indicating "installation is complete although some optional components failed to download properly (6). Help, please!

  I try to download my first pro, but the installation is terminated at 84%, indicating "installation is complete although some optional components failed to download properly (6). Help, please!

  I bought tonight and im debating having a refund!

  You can try to use the Adobe cleaning tool and try to download again:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Absolute, complete NOOB! Help me to update a Web site.

  Hello

  I'm a complete Noob to CF, somehow avoided so far but find myself looking at a CF Web site written for a training company, I'm now consulting at (for various tasks, including the update of their Web site.

  For this site, some of the hyperlinks in the content became broken and I was in charge of updating them. I downloaded the static .cfm, have it edited in Dreamweaver, downloaded the .cfm turn it back on to the server and...

  Nothing has changed!

  I need to rebuild somehow content?

  Please save me from tearing out what little hair I have left out...

  With our thanks,

  Peter

  (I'm currently completely embarrassed that I even had to ask this question!)

  Yes CFML = ColdFusion Markup Language, which may be part of the .cfm, cfc, and cfr files and other if you care about monkey with default file extensions.

  Yes ColdFusion compiles CFML in the code of JavaByte, until the file is executed.  This is done in a just-in-time"compilation method, i.e. when the file is requested by the web server (IIS, Apache, etc.), ColdFusion compile this file, run the compiled code and send the results on the web server.  The time necessary to compile files can a proformance on servers busy, very common problem.  There are options for ColdFusion to save compiled versions so that he doesn't have to make this compilation every time.  You can also configure if ColdFusion checks the date and time of the file compiled with the date-time of the source CFML file to see if the source is newer or not and so if it needs to be recompiled.

  If clearing the cache didn't cause your changes to take effect, you will need to describe more about your installation.  This isn't a place where ColdFusion has problems, it works as advertised.

• HP OfficeJet 4650: HELP please... printer will print a page and print is not complete

  I'm so frustrated.  I bought this printer 10 days ago and he hung up.  Worked very well.  Print several things and one day in the middle of the printing of the forms out, then it just starts Act up.  I have tried several things to fix the problem, but nothing resolved.  It will print the first page (1 of 7) but then it gives me just a blank sheet for page 2 and then stops.  What is going on?  Help, please.  I am implemented instant of hp ink and I lost several prints to try to solve this problem.

  To all those who have this problem with Windows 10. Ryan at HP helped me to understand that it was the edge browser that was causing problems. I thought that I was using Internet Explorer, but he was on board. Try using Internet Explorer or Chrome. It solved the problem for me. Thank you Ryan at HP!

• Why all of a sudden my monitor shows a double image of everything? I checked all the controls in the monitor. Have complete scan of the system. Restarted. Help please!

  Why my monitor see suddenly double images? A bit like a 3D cube. I checked all the settings in the screen itself. They are very good. A comprehensive security system has to analyze. He came clean. Cache of cookies. Defragmented. Restarted. Is entered in controls and found nothing out of the ordinary. But then again, I'm not very savvy computer. Help, please!

  Borrow a monitor from a friend and attach it to your computer, if possible, attach your monitor to your friend's computer.  If the monitor remains screwey computer your friend then the monitor is dying and needs to be replaced.  If the monitor of your friend looks like screwey on your computer, you'll have a hardware problem that must be solved.

• 2015 CC Dreamweaver cannot open or create web files more: message "invalid argument has been found" keep appearing instead. The problem persists even after complete reinstallation. Help please.

  I have Dreamweaver CC 2015 since last year, on a system win 7 with plenty of space and good care.
  Never had any problems until last week, when Dreamweaver stop opening o creation of html or php files. Instead, the program displays an alert of "invalid argument has been found", then stops to do anything.

  I've looked everywhere. I cleaned the resgistry, reset preferences custom, tested different files, with or without content, old and new, even uninstalled and reinstalled Adobe CC. Nothing works.

  I install Quora, because I have work to do, but I prefer clearly have CC Dreamweaver working again.

  Need help please, I don't really know what to do.

  Although that is NOT a real solution (now I have to keep a local copy redundant and unprotected and move almost a gigabyte of data, whenever I need to edit a project) work space solves the problem. I still don't know what has changed since before, but I can work again.

  IMO Adobe should at least give notice of this behavior, letting us know that the application does not work because it is restricted to local activities. "This file cannot be saved through a network" or "this program can change the local files" would have sufficed for avoid me a good 5 hours of lost production.

• The scripted model complete for "Tree" is missing - the others are there.  That's happened?  Help, please.

  When I go in Edition > fill and select "Pattern".  I check the ' Script: box, and then click the arrow in the menu drop-down. "  The following display: filling of brick / Cross Weave / place along the path / fill Random / spiral.

  Filling of symmetry - but NOT a tree.

  What's wrong?  I have reset everything - still no tree.

  Help, please.

  Thank you

  In the latest version, it has been moved from the menu filters. If you have an older version, then it is possible that photoshop is having a problem with your video card, its driver or preferences. Make sure that photoshop preferences has advanced graphics enabled. If this doesn't work, update the video card driver.

  You could list your system specs, then maybe someone else can lead to a solution.

• Need help please this script... LucD? :-)

  Everything works as expected, but I have a problem with the two parts of the script. They are the bits where he itterates the NETWORK card and hard drives (pink and blue sections below).

  Problem with the NIC (Pink) loop - it only shows nic 0, and if there are multiple network cards - they are not out in the CSV file. Also returns only 0 NETWORK adapter MAC address and not the other nic MAC addresses...

  Problem with loop (blue) disc - it returns only the first TWO discs even if some of my VM 4 or even 5 discs...

  No idea why this is happening. This script is not my work, but I found it very useful for what I need...

  Script:

  Claire
  

  $VirtualCenter = Read-Host "Enter the Virtual Center server name".

  $FileLocation = Read-Host "Please Enter full Path and file name to save the output.  Must end in .csv or .txt.
  

  $Cred = get-Credential
  

  SE connect-VIServer $VirtualCenter - Credential $Cred
  

  $stats = @)

  #Uncomment the two lines if you want to inventory just a cluster instead of all the VMS in vCenter
  

  #$VMCluster = Read-Host "Please enter the name of the Cluster.
  

  #$ServerList = get-VM-location $VMCluster

  #If the two given lines are deleted, then comment out the following line
  

  $ServerList = get - VM

  {Foreach ($Guests to $ServerList)
  

  $Guest = $Guests.Name.ToUpper)
  

  Write-Progress-activity "Create VMware Guest Inventory" - Status "Treatment VM guest $Guest" # display progress bar
  

  $VMGuest = get - VM $Guest | Get-View
  

  $VM = get - VM $Guest
  

  $ESXHost is (get - VM $Guest). Host.Name.ToUpper)
  

  $VMHost = get-vmhost $ESXHost | Get-View

  $row = new-Object System.Object
  

  $row | Add-Member-Type NoteProperty-name 'Guest' - value $VMGuest.Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name "Power status" - value $VM. Guest.State
  

  $row | Add-Member-Type NoteProperty - Name "Guest OS full name"-value $VM. Guest.OSFullName
  

  $row | Add-Member-Type NoteProperty-name "Comments RAM (MB)" - value $VM. MemoryMB
  

  $row | Add-Member-Type NoteProperty - Name 'Comments vCPU Count' - value $VM. NumCPU
  

  $row | Add-Member-Type NoteProperty - name "Guest VMTools status" - value $VMGuest.Guest.ToolsStatus
  

  $row | Add-Member-Type NoteProperty-name "Guest VMTools Version" - value $VMGuest.Guest.ToolsVersion
  

  $row | Add-Member-Type NoteProperty - name 'Guest status VMTools Version' - value $VMGuest.Guest.ToolsVersionStatus
  

  $row | Add-Member-Type NoteProperty - name "Comments VMTools status running" - value $VMGuest.Guest.ToolsRunningStatus
  

  
  

  $NICCount = 0
  

  ForEach ($vNic in $VM. Guest.Nics) {}

  
  

  $NIC_IP = "Guest IP Address for the NETWORK adapter" + $NICCount + "."
  

  $NIC_MAC = "MAC address of Guest for the NETWORK adapter" + $NICCount + "."
  

  $NIC_vSwitch = "Guest vSwitch network for the NETWORK adapter" + $NICCount + "."
  

  $row | Add-Member-Type NoteProperty - name $NIC_IP-$VMGuest.Guest.IpAddress value
  

  $row | Add-Member-Type NoteProperty - name $NIC_MAC-$vNic.MacAddress value
  

  $row | Add-Member-Type NoteProperty - name $NIC_vSwitch-$vNic.NetworkName value
  

  $NICCount ++
  

  }

  $DiskCount = 0
  

  $DT = @)
  

  ForEach ($vDisk in $VM. Guest.Disks) {}
  

  $DriveLetter = 'Comments Drive' + $DiskCount + ' ".
  

  $DriveSize = 'Comments Drive' + $DiskCount + 'size '.
  

  $DriveFree = 'Comments Drive' + $DiskCount + 'free space '.
  

  $vDiskCap = [math]: Round (($vDisk.Capacity)/1 GB)
  

  $vDiskFree = [math]: Round (($vDisk.FreeSpace)/1 GB)
  

  $row | Add-Member-Type NoteProperty - name $DriveLetter-$vDisk.Path value
  

  $row | Add-Member-Type NoteProperty-name $DriveSize - value $vDiskCap
  

  $row | Add-Member-Type NoteProperty-name $DriveFree - value $vDiskFree
  

  $DiskCount ++
  

  $DriveTotals = "" + $row. $DriveLetter + "" + $row. $DriveSize + ';
  

  $DT += $DriveTotals
  

  }

  
  

  $row | Add-Member-Type NoteProperty - Name 'Host name' - value $VMHost.Summary.Config.Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name 'number of Sessions on the host' - value $VMHost.vm.Count
  

  $row | Add-Member-Type NoteProperty - Name "Is a member of the host Cluster" - value (Get-Cluster - VMHost $ESXHost). Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name "Hosting provider" - value $VMHost.Hardware.SystemInfo.Vendor
  

  $row | Add-Member-Type NoteProperty - name 'Model home' - value $VMHost.Hardware.SystemInfo.Model
  

  $HostRam = [math]::Round(($VMHost.Summary.Hardware.MemorySize)/1Go)
  

  $row | Add-Member-Type NoteProperty - name 'RAM to host' - value $HostRam
  

  $row | Add-Member-Type NoteProperty - name "CPU model of home" - value $VMHost.Summary.Hardware.CpuModel
  

  $row | Add-Member-Type NoteProperty - name 'number of CPU host' - value $VMHost.Summary.Hardware.NumCpuThreads
  

  $row | Add-Member-Type NoteProperty - name 'The host CPU speed' - value $VMHost.Summary.Hardware.CpuMhz
  

  $row | Add-Member-Type NoteProperty - Name 'Name of the product to home' - value $VMHost.Summary.Config.Product.Name
  

  $row | Add-Member-Type NoteProperty - name 'Version of the product to home' - value $VMHost.Summary.Config.Product.Version
  

  $row | Add-Member-Type NoteProperty - name of the Generation of product to home' - value $VMHost.Summary.Config.Product.Build
  

  $row | Add-Member-Type NoteProperty - name of the "Service Console to host" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.IPAddress
  

  $row | Add-Member-Type NoteProperty - name "the subnet mask of Console Hosting Service" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.SubnetMask
  

  $row | Add-Member-Type NoteProperty - name of the "Service Console 1 to host" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.IPAddress
  

  $row | Add-Member-Type NoteProperty - name "the subnet mask of Console 1 Hosting Service" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.SubnetMask
  

  $row | Add-Member-Type NoteProperty - Name "vMotion Host IP Address" - value $VMHost.Config.vMotion.IPConfig.IpAddress
  

  $row | Add-Member-Type NoteProperty - Name "VMotion the subnet mask of the host" - value $VMHost.Config.vMotion.IPConfig.SubnetMask
  

  
  

  $stats += $row
  

  
  

  
  

  }
  

  $stats | Export-Csv-Force. \$FileLocation - NoTypeInformation
  

  Invoke-Item. \$FileLocation

  Thanks for your help

  PS. I'm a complete NOOB with Powercli, so try to find my way around it yet.

  PPS - if someone has a better VM inventory script - please be so kind as to pointing me to it...
  

  Thought as well, but I'm afraid he wil cover the possibilities.

  Assume the following:

  VM1, 3 cards, 2 hard drives

  VM2, 2 cards, 5 hard drives

  The order will be VM1, VM2 with the effect that you get 2 hard drives for VM2.

  The alternative I came with us to make Dummy entries and always use the maximum columns for network cards and hard drives.

  If you want to get

  NIC1 NIC2, NIC3 HD1 HD2 HD3 HD4 HD5

  VM1 x x x x x na na na

  VM2 x x na x x x x x

  See if it works for you.

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support