I am running Vista SP2 64-bit, I'm trying to dl/install updates security 5 and get a 8E5E0147 error. Help, please!

Similar Questions

• Vista Basic 32-bit X 86 PC. Download/install updates to important safety for more than 2 years (didn't know that it was not doing this).

  I use CCleaner, Spybot and defragment the hard drive a week. The computer crashes often and over the past year, I've found if I pull up the Windows Task Manager, it thaws the computer most of the time. I tried KB947821 update tool for Windows Vista system, but when he tried to install I get error 0 x 80240009. I tried MicroSofts MicroSoftFixit.wu.MATSKB.Run, but it is too impossible to install. I have F-Secure protection and it seems to work, but can't really verify. A friend has the same protection, F-Secure and Vista, but did not have these problems. Someone at - he found a solution before reloading the system? If so, what can I do?
  Important security downloads unloaded are KB975560 KB978251, KB974145, KB977165, KB987262 and KB971468.

  Most of the 'solutions' I found online did not work (preparation of the system and the MS Fixit downloads tool)

  Help!

  Manual is very well.  Here are a few things to check.

  Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  If none of the above solves your problem, it's time to backup your data and restore your computer to factory settings.

  I hope this helps.  Good luck.

• I am running Vista Ultimate 32 Bit version of 7 should I install

  I tried running windows update Advisor, but he can't scan my system for some reason any. so I don't know what verson of 7 should I buy

  This is the Forum for Windows Update.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  Windows Vista SP2 came out mid-2009.  You should have gotten a long time ago.

  How to obtain the latest Windows Vista service pack

• I am running vista ultimate 32-bit and 64-bit so the disk and to install 64-bit on a new PC.

  Salvation as above I am currently running Vista Ultimate 32 bit and have just bought a new computer that is running a 64-bit system, I have a product OPS windows genuine containing both 32 & 64-bit disc. How can I disable the 32-bit to install a clean 64-bit on a new HARD drive. I intend to use a drive to kill to wipe the HARD drive on my old computer but have read that others have had the problem, reinstall the 64-bit version as windows will not activate the license, any help or advice on this would be really appreciated.

  Hello

  Just clean the disk.

  There is no way to disable the function.

  And phone Activation may be necessary when you do what you do.

  You'll probably have to explain to a real person.

  What to is explained in the link.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Using Windows Vista SP2 (32 bit), failed to install IIS

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!
  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!
  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!

  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!

  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  I have only a limited understanding of IIS and ASP.net.

  1. What are they? IIS 5, 6, 7.0?
  2. make sure that your version of Vista can support.
  Go to programs and features > column to the left, turn Windows has on or off > scrolling Internet Information Service > expand (+) sign and make sure if its level of compatibility under Web management tools. Home Premium can go as far as IIS6. > Make sure check marks are on the elements you need to install IIS.

  3. from what I understand, the version of Vista Ultimate and superior is required to install IIS 7.

  This is as far as I know.

  To install IIS 7, here is a tutorial:
  http://learn.IIS.NET/page.aspx/28/installing-IIS-7-on-Windows-Vista-and-Windows-7/

  Your question needed IT expertise. I suggest that transfer you to one of these support ASP.NET forums.
  Here's one of them: http://forums.asp.net/

• I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

  You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

  "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

• Can I install lightroom 5 on Windows vista home 32 bits andhow many computers can I install it on? I'm afraid that if my computer rejects lightroom I will get a second chance.

  Can I install lightroom 5 on Windows vista home 32 bits andhow many computers can I install it on? I'm afraid that if my computer rejects lightroom I will get a second chance.

  Bunkieboy,

  Lightroom 4 and later will not install or run on the 32-bit editions and 64-bit of Windows XP Edition family or professional

  Lightroom 5 et seq. will not install or run on 32-bit editions of Windows 7, Windows 8, 8.1 for Windows and Mac OS 10.6.x

  Lightroom CC will not install or run on Mac OS 10.7.x

  Please see system requirements for Lightroom for more information.

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it one at a time. Lightroom is the exception because it is a cross-platform product, so it can be installed on the pc and mac platforms.

  Guinot

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security

  Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security...

  First of all, this forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Secondly, this is not the place to ask questions about WIndows 8 Developer Preview.

  Some likely forums are:
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsapps
  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

• I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

  Update product key

  I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

  You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

  Read your manual, on the recovery of the system and try the options there.

  If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

• My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  Hello what jay,

  Thank you for your message.  Please, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  Here you see secondary hard drive?
  If so, you can assign it a drive letter and everything should be good.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.