Complete the workflow

Similar Questions

• Archived content that is in the workflow, status review

  I archive the content, which is still in the workflow, is not a review, not approved.
  If the status of the indexer is presented as "Workflow."
  Status review is "Review".
  
  If I create a query with these criteria, the archive is empty.
  
  dReleaseState = 'E' AND dStatus = 'OPINION '.
  
  Query options = "all selected revisions.
  
  I know exactly that he is happy and I should have more than 200 files but exported archiver "0".
  Finish. Exports successfully 0 revisions.
  
  What can I do to get around this restriction?
  
  Thx for your help.
  
  
  By the way... Found Repository Manager content in the workflow. Archiver is not.
  
  Edited by: travillion on 18.09.2012 10:25

  Sorry, but this is the correct and expected. You cannot export any items currently in an active workflow.

  This excerpt comes from 10g documentation, but it applies to 11g. (He has been this way for many, many years.)

  You can export revisions that have a status of RELEASED, DONE, EXPIRED and GENWWW. You cannot export revisions that are in an active workflow (revision, EDITING or pending status) or which are DELETED.

  A big reason is that there is a bit of additional data on the document and the associated workflow process itself that archive simply cannot capture and migrate.

  It is much simpler to just complete the workflow before attempting to migrate the data.

• Enable the initiator to cancel the workflow

  We want to leave the workflow creator to cancel the workflow.  At present, they must search in the Tracker to see who is assigned to the step, then he or she must call that person and ask them to cancel the request.  At each stage, allow us to cancel.  Everyone has a web service or separate process that would allow the initiator to cancel the request?

  You can create a workflow process using gateways.  The gateways allow multiple logical paths.

  Split w/f after the initial stage.  A leg is your current approval process, the other leg of the roads of gateway to a task assigned to the initiator user (they get an action that will allow them to cancel).

  Set the gateway to be of type 'or' instead of a 'and' - as if one leg is completed, the workflow is done.

  I him did not for a moment, so you'll need to experiment to see if it cleans all the tasks of participants.

  I had to build a dynamic f/w with over 100 potential participants and had to create a custom component to clean the subtasks of the user.

  I hope this helps.

  Mark

• CS5 installation failure exit code: 7 unable to complete the silent workflow

  "Exit code: 7 - could not complete the silent workflow" appear in the Installer log file. What should I do to fix

  ?

  In the Creative Suite 5 Design Standard Installation log, I found this error:

  Call to the custom action ROLLBACK encode the pre-installation for payload {D92BBB52-82FF-42ED-8A3C-4E062F944AB7} Microsoft_VC80_MFCLOC_x86

  Fri Jul 25 [1324] 12:50:19 WARN 2014

  I also ran CC cleaner.

• Status for the workflow IN. monitor say complete workflow with errors

  Hello
  
  I changed the PO notification by changing the associated plsql package. Now when I see IN. notices in the notification window it display correctly.
  
  When I search the same PO in State control in charge of workflow administrator, I get the following error.
  =============================
  [WF_ERROR] ERROR_MESSAGE = 3835: error '-20002 - ORA-20002: 2018: impossible to generate the XML notification. Caused by: 2020: error getting to content of the notification. Caused by: ORA-04061: current status of has been invalidated ORA-04061: current state of the package body 'APPS '. PO_WF_PO_NOTIFICATION"has been invalidated ORA-04065: not executed, altered or abandoned the package body"APPS. PO_WF_PO_NOTIFICATION' ORA-06508: PL/SQL: called program unit is not found: 'APPS. PO_WF_PO_NOTIFICATION' wf_notification. GetAttrDoc2 (2975647, ACTION_HISTORY, text/html)' encountered during execution of the function Generate ' WF_XML. Generate ' event 'oracle.apps.wf.notification.send '. ERROR_STACK = WF_MAIL. GetLOBMessage3 (2975647, WFMAIL, 2020: error getting notification content.) Caused by: ORA-04061: current status of has been invalidated ORA-04061: current state of the package body 'APPS '. PO_WF_PO_NOTIFICATION"has been invalidated ORA-04065: not executed, altered or abandoned the package body"APPS. PO_WF_PO_NOTIFICATION' ORA-06508: PL/SQL: called program unit is not found: 'APPS. PO_WF_PO_NOTIFICATION' wf_notification. GetAttrDoc2(2975647, ACTION_HISTORY, text/html) Wf_Notification.GetAttrDoc(2975647, ACTION_HISTORY, text/html) Wf_Notification.GetText(2975647, text/html) Wf_Notification.GetBody(2975647, text/html) WF_NOTIFICATION. GetFullBody(nid => 2975647, disptype => text/html) WF_MAIL. GetLOBMessage3(nid => 2975647, r_ntf_pref => MAILHTML), step-> text/html body layout) WF_XML. GenerateDoc(oracle.apps.wf.notification.send, 2975647) WF_XML. Generate(Oracle.apps.WF.notification.Send, 2975647) WF_XML. Generate(Oracle.apps.WF.notification.Send, 2975647) Wf_Event.setMessage(oracle.apps.wf.notification.send, 2975647, WF_XML.) Generate) Wf_Event.dispatch_internal)
  =============================
  
  How can I make sure workflow completed without error.
  
  Thanks in advance

  957031 wrote:
  How can thanks for the useful update, I perform steps below

  1. stop the sender of the Notification and the workflow delayed Notification Agent listener
  -How can I shutdown Notification Mailer and deferred Workflow Notification Agent listener

  see the MOS note:
  Workflow Java Mailer & Notifications FAQ [ID 562551.1]
  and http://docs.oracle.com/cd/A60725_05/html/comnls/us/fnd/fndwfmal.htm

  2nd recompile the applications through ADADMIN schema
  -What are we by schema recompile APPS through ADADMIN, do what this means we must compile all invalid objects of the apps schema.

  check
  http://docs.Oracle.com/CD/A97501_01/Acrobat/11iadutil.PDF

  Thank you

• Time-out in the workflow

  Hi all

  I am new to Oracle Workflow. I am facing problem when I put the Notification time-out feature.

  Approve and reject functionality does not work as expected.

  I put the time for 2 Minutes.

  and my notification package is as below,

  If funcmode = "RUN" then

  Insert the script - good job (it is inserting only when I select to approve or reject, not sure why it doesn't work when timeout)

  end if;

  If funcmode = "TIMEOUT" then

  Insert the script - don't DO NOT WORK
  end if

  If funcmode = 'REPLY' then

  If result = "APPROVED" then

  ... good job

  elsif result = "REJECTED" then

  ... good job.

  on the other

  ......

  end if;

  end if;

  I need to insert into a table, when the time came.

  Please tell me how to do?

  I thank in advance.

  Kind regards

  UVA.

  Are you sure that you have completed the engine in background once expired the time-out? I mean, not because two minutes have passed is the activity considered as expired. You must run the background engine for the activity has expired. He's there when the funcmode = "TIMEOUT" will be used.

  You can use the wfengchk.sql script to check whether the activity has actually expired.

  Kind regards

  Alejandro

• In regard to the Workflow Designer in Adobe sign

  I wanted to confirm that the user interface technology used for the manufacture of boxes of workflow is HTML5, also I am not able to view the workflow option in the trial version of the product.

  It is not available in trial version?

  Also, please share links to understand more precisely on the workflow designer.

  Hi anikav53009235,

  Please be informed trial offer is a superior level of service will be all the features except integration.

  You can consult the KB documents below to create forms in the sign Adobe environment:

  Create form: Create forms

  Field Type field types :

  Assign roles: assign roles to form fields

  Field validation: form field validation

  Appearance of field: set the appearance of the field

  Otherwise, you can use the method of text tag to complete the forms:

  Use the text tag - Tags text use to create form fields

  Feel free to contact us if you have queries or concern.

  Kind regards

  Nicos

• Passing parameters to a method call in the workflow

  Hello

  I have a jsff page with a table it contains. To fill the table I used the default activity in the workflow.

  Table is is filled with data. When clicked on a line other jsff should get called.

  For this, we have written action method in the backup of the homepage bean.

  public String homeNavigation() {}

  Return "navigateToJobDetails";

  }

  and in the workflow if "navigateToJobDetails" is returned, we called breeding "getJobDetails" for complete details on employment and the method of flow control is given to the jobdetails.jsff page.

  This stream works very well, but we need to send parameters to the getJobDetails method. How this can be done.

  Help, please.

  JDeveloper 11.1.1.7.0

  http://docs.Oracle.com/CD/E12839_01/Web.1111/b31974/taskflows_activities.htm#ADFFD1676

  See: 15.5.2 How to specify the method parameters and return

  Dario

• Rest of the Workflow Service API now

  I have a workflow that works perfectly in vRO 6.0.3.  I migrated the workflow to vRO 7 and I get this error when running: not supported the value of the header: accept = * / * I'm defining the header with this command

  request.setHeader ("Accept", "application/json");

  Here is the complete answer

  |  'attribute': name = error code type = string value =

  |  'attribute': name = restOperation type = value REMAINS: RESTOperation = "d18034f6-cdd2-484e-bfbd-752ac1274f3d:7f70ca66-6c2f-4353-bcad-e96843fbd2fc" dunes://service.dunes.ch/CustomSDKObject?id= & dunesName = ' REST: RESTOperation.

  |  'attribute': name = statusCodeAttribute type = numeric value = 400

  |  'attribute': name = hostResource type = value ResourceElement = dunes://service.dunes.ch/ResourceElement?id= "0dc69f5c-e39e-49a8-bd65-9cbd6bda9b2d" & dunesName = "ResourceElement".

  |  "output": name = statusCode type = numeric value = 400

  |  "output": name = contentLength type = numeric value = 232

  |  "output": name = bots = properties value=#[#Snapi-Request-Id#=#string#a288deff-68d3-48b6-8478-d841c53bc001#+#Strict-Transport-Security#=#string#max-age=15768000; includeSubDomains;#+#Server#=#string#gunicorn/19.3.0#+#X-Cnection#=#string#close#+#Set-Cookie#=#string#JSESSIONID=C2C4D02AB5F1042977303385B65B0EC2; Guarantee; Path = /; HttpOnly, BIGipServerpool_disney is 1400914186.41278.0000; [Path = / #+ #Content-length #= #string #232 #+ #Date #= #string #Sun, February 28, 2016 03:27:23 GMT #+ #Content-Type #= #string #application / json #] #.

  |  "exit": name = contentAsString type = string value = {'error': {'message': "not supported the value of the header: accept = * / * ',' detail": "not supported the value of the header: accept = * / * check error logs trace or enable the glide.rest.debug property check processing demand REMAINS" "}, 'status':"fail"}

  |  "output": name = type of numbers = Array/string value = #{#} #.

  |  ["output": name = output type = string value =]

  |  "exit": name = type of results = string value = {'error': {'message': "not supported the value of the header: accept = * / * ',' detail": "not supported the value of the header: accept = * / * check error logs trace or enable the glide.rest.debug property check processing demand REMAINS" "}, 'status':"fail"}

  |  "no entries".

  End of the execution stack.

  Someone at - he seen elsewhere and not a clue?

  There was a bug in header processing logic that is fixed in the latest plugin versions and will be available with the upcoming vRO 7.0.1 version.

  A quick fix would be to change the line set to your header (note the lower case 'a' accepts):

  request.setHeader("accept","application/json");
  

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• test the workflow

  Hi peoples, I have well configured orchestrator and now I'm testing the workflow.

  The first workflow that I tested is library\vcenter\virtual machine management\move and migrate\MIGRATE VIRTUAL MACHINE

  I right click and choose RUN the workflow, after having entered all the settings, the selected VM is migrated correctly.

  Now, I am testing library\vcenter\storage\DISPLAY all DATASTRES AND DISKS

  I right click and choose RUN the workflow. It runs and ends, but where I can see the display of the results?

  Thanks in advance and best regards

  VMB

  Hello

  You can see the result in the "Logs" tab on the completed workflow.

• How to activate the Workflow Service Agent - E - BIZ R12 Oracle listener

  Environment
  
  DB: 11.1.0.7
  Rel. Appl: R12.1.1
  OS : RHEL 5.1 (x86_64)
  
  Here is the work around is to bring up the WF Agent listener
  
  After completion of the accessing the WORKFLOW system Clone,
  
  Shippers notice status: down
  Agent listeners: down
  Fix components: down
  
  -Workflow Notification Mailer is not required for this Instance
  
  I did it after the NAVIGATION
  
  Log in as a sysadmin
  
  Go to system administrator > OAM > Wrkflow > fix components
  
  Here this theres window a dropdown menu with the actions defined, I selected Stop ALL and click Go
  
  a Req on submitted, when I checked administrator system > OAM > Wrkflow > Service components
  
  Status of the components are disable ...
  
  After awhile, I chose listener WF Agent and started OAM and another checked the concurrent application windows, it had ended normal and there was no exit and the file log and priority is 0
  
  
  Please guide me what needs to be done to activate the particular service...
  
  
  -Chetan

  Please see these Docs MOS.

  How to start the deferred Workflow Agent andWorkflow deferred Java Agent listener listener? [548918.1 ID]
  "Service component container does not work" when you try to start workflow components [733335.1 ID]
  Troubleshooting failure of workflow Agent listener on startup [ID 469009.1]

  Thank you
  Hussein

• Question when the workflow started the same session

  Hello world
  I'm having a weird problem. When I start the workflow for the first time, it is stuck at a certain "Activity A" activity with a status of 'Active'. When I start the workflow from the same session for the second transaction, the first transaction is completed and the other is still stuck in the same activity. It continues when I start the workflow from the same session.
  
  But when I close this session, the last transaction of this session is permanantly stuck to the activity with a status of 'Active'.
  
  When I open another session and submit the first transaction, once again the same pattern repeats itself.
  
  
  The code of the activity where it gets stuck is:
  PROCEDURE PROCESS_REQUEST_SUBMIT (itemtype in varchar2,
  ItemKey in varchar2,
  actid number,
  funcmode in varchar2,
  Out out result NOCOPY varchar2)
  IS
  l_sundry_listing_number varchar2 (30);
  number of l_approval_sequence;
  l_action_by varchar2 (240);
  l_count number;
  BEGIN
  
  
  
  l_sundry_listing_number: = wf_engine.getitemattrtext(itemtype,itemkey,'TRANSACTION_ID');
  
  Select count (*) in the XXCED_SUNDRY_WF_ACTION_HIST l_count
  where sundry_listing_number = l_sundry_listing_number;
  
  If l_count = 0 then
  l_approval_sequence: = 0;
  on the other
  Select max (approval_sequence) in the l_approval_sequence of XXCED_SUNDRY_WF_ACTION_HIST
  where sundry_listing_number = l_sundry_listing_number;
  l_approval_sequence: = l_approval_sequence + 1;
  end if;
  
  l_action_by: = wf_engine.getitemattrtext(itemtype,itemkey,'REQUESTOR_NAME');
  
  INSERT INTO XXCED_SUNDRY_WF_ACTION_HIST
  (SUNDRY_LISTING_NUMBER,
  APPROVAL_SEQUENCE,
  ACTION_BY,
  ACTION,
  ACTION_DATE
  )
  VALUES
  (l_sundry_listing_number,
  l_approval_sequence,
  l_action_by,
  "Submit."
  TO_CHAR (sysdate, "DD-MON-YY HH24:MI:SS)
  );
  
  COMMIT;
  
  
  
  END PROCESS_REQUEST_SUBMIT;
  
  
  Can someone help me with this problem please?
  
  
  Thank you
  Rambeau

  Hello

  So that the workflow must be started correctly, something MUST validate the transaction - be it in your procedure that starts the workflow, or anything that calls this procedure. If there is no commit, then when the session disconnects, it restores the workflow.

  So, try

  begin
  XXCED_APWFL006_SUNDRYAPPR_PKG.Initiate_Workflow(transaction_id=>'SUNDRY-0001',
  requestor=>'AMBALAR');
  COMMIT;
  end; 
  

  SQL * more and see what the results are. If it works, the problem is within your call to call the workflow without a validation process.

  Matt

  Published by: Darryl Burke - advertising and deleted links

• PowerCenter session ends, the workflow ends much later.

  We have a frequent an end of session, but then the workflow does not complete for 10, 20 or even 30 minutes. It comes from occurring on random workflows that normally take a minute or less to run.
  
  It happens on the workflow out-of-the-box 7.9.6.1 Apps. We use the 8.6.1, hotfix 6 PowerCenter.
  
  Has anyone else seen this behavior?

  Yes Hot fix 11 Informatica, it comes standard with 7.9.6.2, please apply that to 7.9.6.1, it is supported by Oracle