Completely no response / does not load

I bought Sansa clip + for less than a month ago. I played every day and really enjoyed it. even today, while listening to the radio, it stopped working. I thought it was low battery. but when I plugged it to load, it did not at all. just the screen remained black. pressing any button doesn't work either. Anyone know what is happening with it? Thank you very much

Have you tried a reset of the system?  (Hold for 15-30 seconds).

Tags: SanDisk Sansa

Similar Questions

  • My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

    Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

    Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

  • I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

    The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

    Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox if possible.

    • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Updated my iPhone6 to ios10 and now my battery heats up and does not load

    Updated my iPhone6 to ios10 and now my battery heats up and does not load

    I have never experienced this with another iPhone or iOS version

    Of course, it's a problem because I use my phone all day

    What troubleshooting steps have been taken so far?

    Have you completed a reboot, reset or restore such as recommended by Apple?

    Best,

    GDG

  • Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

    Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

    You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

    It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

    Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

    If you want to make Apple know how you feel, you can leave your comments via this form

    http://www.Apple.com/feedback/

  • Site does not load unless I have delete cookies from the site. New behavior.

    Most every day I connect to Schwab.com. From a week ago, the login page does not load. I get only a blank page. It works if I clear the cookies from schwab. So does not work the next time. He is fine in Internet Explorer. Very inconvenient. Any ideas why this has started to happen? I can fix it or Mozilla or end of Schwab?

    Thanks for the ideas.

    My Firefox is just there is an update and the problem with the Schwab page disappeared. I think that all changed two updates there was amended to take account of the situation. I know that Schwab was looking into it, it is also possible that they have changed something in their homepage. Anyway, problem solved!

    Thanks to those who responded. I read each response carefully and liked to learn other points of view of the system. Thank you.

    Donn

  • does not load

    Browser does not load...

    I run the scanner and it still load at all... something in this new firefox will not let it load there was absolutely nothing foung on my computer, when it has been analyzed. Before the upgrade, he worked on this computer. I even deleted completely and it redownloaded and nothing seems to work.

  • Michael weekly ad does not load in Firefox, but it loads in Internet Explorer

    My wife and I have different computers, and she is interested in a lot of ads for creative and other stores. As such, she was telling me how the Michael Weekly Ad (http://weeklyad.michaels.com) does not load on his computer. Just for once, I thought I would try on mine, it not expecting to load, but then he did. I've checked everything I can think of; I've completely updated its modules (which proved be useless anyway because after disabling all mine, the announcement still loaded), I checked to make sure that our version of Firefox to correspondence, and I tried using (Google) search engines to locate similar problems without success. Is there an available explanation (and ideally fix all that is wrong)?

    A lot of content on this page is loaded via JavaScript, so it can block scripts on this page if he sin't show prolerly.

    If you use extensions (Tools > Modules > Extensions) as NoScript , Adblock Plus or Block Flash that can block content, and then make sure that these extensions are not blocking content.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.
  • does not load any page as a commom user, works well as an administrator

    I've been running Firefox for centuries now, no problems previously.
    All of a sudden it does not load any page when I launch FF as a normal user. If I run FF as admin, everything works as it should.

    Hello Tyler.
    Thank you for your quick response.

    Unfortunally suggestions do not solve the problem.
    I discovered that it is in the antivirus (AVG). Once I turned off AVG, FF works as it should.
    One way or another AVG don't like FF.

    In retrospect, the problem started with the AVG Free upgrade to the paid version.
    I'll send moy.
    If the issue is resolved, I'll send another answer.
    SeeYou,
    Willem

  • IPhone 6 Plus does not load after upgrading iOS 9.3

    Hello!

    given that I've updated the iOS to 9.3, the phone does not.  The only way to do is to turn off completely.  And it charges very very slowy (5% per hour).  I also used other chargers for iphone genuine and it's the same thing.  The battery down too quickly (10% per hour). And sometimes, the battery goes down 7-8% in a few seconds.  It was perfect before the update but not anynore.

    I have exactly the same problem.  There are many of us that do. I need my phone for work and it is a huge problem, because it won't hold a charge and does not load.

  • Web page does not load, but is connected to the internet?

    Tried setting up of our new Satellite L300-22 x.

    It is connected to the internet, but the Web page does not load. Spoken at the internet provider who went through everything, including resetting ip.
    He said that when I PING, he gets a response, so it isn't a problem here, but something is blocking the Web page... He doesn't know what we had disabled McAfee.

    Someone at - it ideas on what to do next?
    Thank you

    It is really strange.
    Have you tried to test on the other network, or perhaps by friends?
    Have you noticed the same behavior?

    Have your laptop to factory settings?

  • Recovery DVD does not load

    Hi guys,.

    I use a HP Pavilion A6120N Vista. It has a SATA RAID 0 HD value.  Machine will not start. After ordering the HP Recovery Disk Set, I tried to run the program of recovery.  It displays a message that "Windows loading files...". ». When the progress bar is completed, I get a small bar (2 1/2 inch long) with a few lines on this subject moving from left to right.  Below I have the symbol of copyright and Microsoft Corporation.  But it makes no further along than that.  I put the devices to boot from first and second for the dvd player.  I tried to start with each of them the three DVDs.  I tried to start with disk 1, 30 minute wait and the withdrawal of disc 1 / insert disk two.  I tried booting with the UBCD and another bootable cd and then insert disc 1.  I tried to start with the two disc and pressing F11 I got "Disk Boot Failure, Insert System Disk and press Enter". When I replace it with two disc, I get the same results as above.  Nothing works. If anyone has any ideas, I'm open for them.

    After trying on & more, I got another result.  Without the disc in the drive, if I do not press F11 at startup, I get a choice of starting recovery or start windows normally.  These two choices lead to the small bar mentioned above with the lines moving from left to right. If I press F11, it goes straight to "Windows loading files...". "and the little bar with lines.  I chatted with HP support and they said the 800 number.  They told me that the OS is corrupted which causes the restore disc does not load.  Now, I thought that starting a CD/DVD without going through the operating system.  What's in Vista?  Can he change?  I saw as a warning to the other cd/dvd drive (dvd - rw 16 x pbds dh-16a1L) requires an update of the firmware to recognize the HP recovery discs.  I have the drive HL-DT-STdvdrrw.  Could it have the same problem and it had not just been documented?  So far, I am at a total loss.

    Thank you

    Message edited by TennBlues on 30/12/2008 21:58
    Message edited by TennBlues on 12/31/2008 12:03 AM

    AFAIK boot failure disk means one or both of the drives went bad or BIOS (F10) must be set to zero by default. So if the raid 0 Setup and a defective hard driveis then you need to get out that the hd and run recovery on the drive to work or wait until you get to another replaced.

    No, you do NOT have a corruption of the operating system, and Yes, the recovery disc bypasses the operating system on the drive. Windows Vista disk hard is not effect or prevent recovery disks because the disks will always wipe clean first the drive working.

    Try the following steps.

    (1) reboot the pc and go into F10 for installation (for vista)

    On the MAIN tab, check to make sure that your hard drives are both recognized where says 1st or 2nd disk, etc.

    It should look like WDC, SAMSUNG, ST... etc.

    (a) if it is not in the list, then check the SATA cable and power cables inside your computer to make sure it is plugged both ends properly and reconnect the cables to the two discs.

    (b) if only 1 disk is listed, then the other one may went bad on you and I would be the wrong drive breaker go back into the BIOS F10 menu and check that the right drive appears under you devices.

    I would then run a recovery disk of 1 until you replace it. In this case you will not have a raid 0 configuration more since she was only 1 player used.

    (2) try also reset the BIOS default settings by going to the menu of the BIOS F10 at startup and press F5, then press Yes then enter then F10, then Yes, then enter to restore the default BIOS settings.

    (3) after the reboot back to the BIOS menu and go right on the Startup tab and choose boot DEVICE PRIORITY and set the 1st boot device to the Group of HARD drive, then save the changes and exit the BIOS.

    If you want that you set the CDROM boot first yo group.

    You can also turn on the pc and press ESC to boot from the hard drive or a disk drive group.

    I recommend first resetting the default BIOS settings and check the devices first, before opening the pc.

    Message edited by c0rnel on 12/31/2008 01:42

  • Satellite L300 - portable computer does not load

    Hello

    I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.

    All responses will be apperciated, thank you.

    Hi DeeDee_1,

    If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too

    Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.

    Then contact the guy and ask for help. They can give you a good answer ;)

  • G51 - does not load from 60%

    I have recently (early January 2016) got a Lenovo g51 amd A8 WINDOWS 10 and it will not load past 60% I just got and only used to play the Sims 3 and social media sites. But it does not load? Help, please!

    Thank you.

    Comment to Moderator: The model is added to the object for clarity.

    Good day and welcome to the community.

    Looks like you can have the battery saving mode engaged. If so, 60% of load and then stop are normal behavior. In order to load completely, please check the option in the application settings of Lenovo and adjust as required.

    I hope this helps.

    Kind regards.

  • I get the error code 66A with an update that does not load

    a windows update does not load, I get an error code 66A, its boring, I can't get an answer anywhere

    See Andre.Ziegler response to a previous post about the error code:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/107c5a3a-3126-4EAA-930E-815aed8a2582 >

Maybe you are looking for

  • e/s audio simultaneous with daqmx

    I am trying to perform the processing with LABVIEW Student 2013 and myDAQ for audio generation and the acquisition of audio in real time. The treatment will be to manipulate data of signal pt by pt. It seems that continuous sampling is correct with a

  • Who and what is Uniblue registry and how do I get rid of him?

    YES, NOW, HOW CAN YOU GET RID OF THIS UNIBLUE REGISTRY. IT DOES NOT WORK SO I WOULD LIKE TO REMOVE MY COMPUTER IT A WANT FOR ME, THANKS AGAIN.

  • What is windows power shell

    I noticed windows windows power shell and shell what ISE has installed on my computer. What is this program?

  • Aurora - Premium option-DPN liquid cooling: 01YGW

    Thought I'd start a thread to compile some info on the new Premium liquid cooling option offered in the Aurora R4 News (and beyond). I welcome any definitive info from Dell Reps or users of the forum (which has one in their machine). Finally, some pi

  • HELP WITH WINDOWS EXPORER

    My default windows Explorer size is half of the screen and I just want it to fill the screen when I open it. HOW WILL WE CHANGE IT? Help, please.