Compliance on importing files problem

Similar Questions

• LR3 - change of name of the import file problem

  I have a problem with renaming of files during import.

  I import using YYYYMMDD at the beginning of the file name. However, a picture is taken after about 14:00 one day gets date for tomorrow.

  Any ideas?

  Known bug.

  http://forums.Adobe.com/message/2880448?TSTART=0#2880448

  Workaround for now is to rename not during the import, but in the library after the import. Strangely, rename in library works correctly.

• Problem importing files Outlook Express to Windows Live Mail in Windows 7__

  My new computer has Windows 7 and, of course, Windows Live Mail.  My old computer has Windows XP and Outlook Express.  I copied my file OE that contains all my USB key *.dbx files.  On the file menu of WLM, I then selected "Import Messages" and then indicated the location of my OE files on the USB key.  When I clicked to import the files, a small window with a green status bar that showed all the imported files.  I then clicked on "Finish."  My problem is even if the import seems to be successful I don't think the imported files or folders in Live Mail.  I tried twice with the same results.  Did I miss a step?  My just OE files seem to have not gotten in my Windows Live Mail program.

  Look in the imported folders under storage folders. If you do not see the storage files, in the Menu bar: view | Page layout | The folders pane. Check: View the storage folders.

  Missing Menu bar? Click the menu button to the left of the help button and activate the menu bar.

  If still no joy, copy the database messages OE of the USB on the desktop and try to import from there.

  Transfer of data from Outlook Express and Windows Live Mail:

  For messages:

  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail. Open WLMail and: file | Import | Messages | Microsoft Outlook Express 6, and the point where it was saved.

  Location of OE message store:

  In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  For addresses:

  Open the address book in OE and file | Export | Address book (wab) and save it to the desktop. Copy it to a flash drive. Place it on the desktop or another location on the computer using WLMail.

  Open the Contacts list in WLMail, (go |) Contacts in the Menu bar) and the file | Import | Address book (wab) Windows and the point where you saved it.

  Note: If you use a CD or a DVD instead of a flash drive, after placing on the new machine you must remove the read-only attribute in the properties before you import.

  Bruce Hagen MS - MVP [Mail]

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Problem with imported * file OAM to InDesign

  Hello

  I'm new with Adobe CC and DPS, if its possible this is a stupid question. But I have a problem with my imported file of OAM is a simple logo flying, when I place it in a document of the iPad in InDesign a TI does not appear when I try to preview.

  Well the OAM file has a transparent background, but I have tried also without it and the same result. Please can someone help me?

  Thank you very much.

  Sorry, hit send too fast.

  You have a black background on the page, but the logo works very well.

  You should test it on a device. Test on the desktop will not work correctly.

• Problems importing files in Dreamweaver

  I previously imported files in Dreamweaver by dragging my desktop and dropping them in the local files from my Web sites.  All of a sudden today, I can not all the files to import into Dreamweaver.  I use Dreamweaver on a Mac with OS 10.9.2 13.2.

  Can drag you files in your folder of local site using the file manager of your operating system (Finder)?

  Nancy O.

• Importing files obj to the resolution of Photoshop problem

  Hello

  I have a question about the resolution of the imported files obj Maya.

  I've created a 3D model on Maya and he exported obj file.

  When I open this file in Photoshop, it opens as a file size: 1024 x 1024 @ 72 dpi.

  I need to have this file as 5000 x 5000, so when I resize the image at this resolution the texture looks really bad (as you would expect you to jump iimages bitmap).

  However, when I double click on the layer of texture, the texture is in much better quality (resolution 10000 x 10000 @300 dpi).

  Why the quality of the texture on the 3D object is so low and how to open in larger format?

  Thank you

  Haven't you set Photohop final quality (Raytracing) rendering or did you leave it on editing mode (GPU)?

• Lost important files of the iCloud drive

  I got loods of important files in the player to iCloud and when it was lowered from 15 GB to 5 GB and I lost loods files when it happened.

  If you have a solutiom to my problem pls tel me it

  You can try to restore your device, but you should first back up your information. This article can help you How to clear your device iOS and then set it up as a new device or restore backups - Apple Support

• 12 iTunes does not import files

  Many have had this problem, all have been resolved (apparently) allowed the format conversion with something of an iTunes or install Quicktime as autonomous, but not me.

  • iTunes 12.1.3.6 64-bit
  • QuickTime 7.7.6

  I have a huge selection of files (mp4 and m4v) video all converted iTunes yet formats over the years of hard work. All worked perfectly (as long as home sharing is not screwing around). I bought new hardware for my main computer so moved my old kit to my server to take over the functions of iTunes. As this is a "new" computer I went straight to import my old HDD to the new NAS (all the permissions granted at a time) from the iTunes library base.

  iTunes has simply nothing. I then tried to import files in various ways at different locations (local shared folder, NAS), and by various techniques (drag / move, import file, import file, open with, add automatically) none of them got the files in iTunes. "Automatically add" gave the strangest response however. I created the "not added" like there was something wrong.

  Three things, I can guarantee you:

  1. Files have been acceptable for the last 5 years in iTunes and are played regularly through the AppleTV, so no conversion is necessary at all.
  2. It's not a permissions issue, as even the local file was not imported.
  3. I can't go to 12.3.1 he simply refuses to start at all.
  4. This box is a new facility with nothing else installed except the above.

  I would like to try an older version of iTunes to see if I could get that back to normal, but I am unable to find a previous releases section (could be me).

  Does anyone have an ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.

  In some cases with 64-bit systems, you may need to install the version of iTunes for Windows (64-bit-for older video cards) and QuickTime to enable iTunes work with some videos. 32-bit users must install QuickTime.

  TT2

• Cannot download and install programssince a corruption of important files... explore 8 is an example

  I had an incident that caused the corruptions of important files and loss of some programs. I was previously using Internet Explorer 8 and now IE7.  When I try to download and install IE8, it blocks the download, runs for hours without having to download anything. Other programs are also not download... arrive almost at the end, they never end. Very frustrating.  Maybe it has more to do with the installer?

  Hello

  1. You did any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the scan on the computer online and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 3:
  If you have problems installing programs, then run this fixit and check if that helps:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  It will be useful.

• SP3 will correct a missing System 32 file problem?

  I have been cheated by removing

  C:\Windows\System32\rundll32.exe

  as a result of something being allowed in my computer because of what I perceive as a failure of my anti-virus program.

  I can access Internet, but not my MS Office 2007 applications.  If I download and install SP3 on my PC it will restore this missing file?  Or is there another way to go about it - I tried to copy the file into another folder where I found the System 32 folder and that did not work.

  Thank you!
  

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• Duplication of important file?

  My recovery Point climbed only need 2 DVD need 7 without obvious reason.

  On the audit of large files/folders, my most important files are:

  C:\                  45.5 GB

  C:\Users\ 16.7 GB

  16.4 GB C:\WINDOWS\

  C:\Users\IAN 14.9 GB

  C:WINDOWS\winsxs 8.48 GB

  My biggest individual file is only 1.32 GB

  Y at - it of these duplicates, and if yes how safely get rid of them?  I transferred a large number of picture files in the storage media and PC and also to/from a laptop.  Notepad (on Windows 7) also seems to have used a lot harder that I expect and has a similar file as indicated above.

  I also seem to have 3 folders containing overall the same JPEG files.

  Any help would be appreciated with gratitude!  Thank you.

  Really sorry for the delay to return to you.

  I tried all the suggestions that threw up only a few minor problems.

  At the end of the day, I've been using again the settings to the factory settings followed by the re-installation of your time, programs, data and updates.  Now, I installed everything as before, but with more than 20 GB more disk space.

  Although directly your suggestions do not solve the problem, I learned a lot more about the inner workings of my computer so thank you!

  Regards Ian

• Lost sound on BBC iPlayer, ITV Player, 4OD, you Tube etc. You know not if deleted the important file or something. Any suggestions?

  No sound on iPlayer from the BBC, ITV player, 4OD, You Tube etc. No problem with speakers like WMP works well. You know not if deleted the important file or something. Any help?

  Problem is now solved. Uninstalled Vista Codec Package and installed K - Lite Codec package and it seems to have solved the problem.

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.