Composition widget starts on the second slide instead of the first.

Similar Questions

• Composition Widget - make a the first picture shown a particular thumbnail view stacked

  Someone knows how to do a special thumbnail of the first image shows a view stacked? I have dozens of thumbnails square, arranged from left to right, top to bottom and all their targets next to this block of thumbnails in a stacked view. When the site is loaded, the first thumbnail to show is the 7th thumbnail! How to make the first thumbnail in the block of the first to show when the page is loaded?

  What describes Brad, this is how it is supposed to work.

  How is the site being downloaded (via publish, upload to FTP host via an external FTP program)?

  What are the options set for the widget of Composition? (Display of a screenshot is easier).

• Some programs do not correctly start on the first try.

  I don't know when or why it started, I'm leaning towards one of the updates. After this point, some installed programs - date of exit of Atari from the edition of Unreal Tournament 2004 Editor and some games via Steam from Valve application for example - began to refuse to start correctly the first time. But on the second, it will be.

  Here's a breakdown of what's going on.

  1. I click to start a program.

  2. the process is, but the program does not work.

  3. I click a second time.

  4. the progress process begins again and the program starts very well.

  Strange things.

  1 Quiting the first process has no effect on the second attempt of result.

  2. does not occur with Microsoft programs I've used. (

  3. steamed, the problem first start levonorgestrol less often launched from the steam window that shortcuts (always failed the first time through the shortcuts)

  4 steam itself doesn't have this problem.

  5 unreal Tournament 2004 works better (errors are rare) on Windows 7 it works on Vista.

  I have Windows 7 Home Pre - 64 bit

  If using the main .exe in the games installs folder work properly remove current shortcut
  and make a new shortcut to the main .exe.
  R / click on the .exe and select - send to - Office.

  If there are problems with the boot via the Steam client you can find the best suggestions on
  steam or via Steam faq forums.

• Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl

  Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.

  @Ach ja, meine Muttersprache ist Deutsch

  You must use the file > Place Photoshop button (Cmd / Ctrl + B).

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• HP Pavilion Notebook 15-ab083T: laptop upgraded before even starting for the first time = problem?

  Hello!

  I recently bought this laptop with the intention to replace the hard drive (1 TB HDD 120 GB SSD), as well as upgrading the ram from 8 GB to 16 GB. The problem is that I have improved these things before you start for the first time. And now it complains that it cannot find a device boot, even when I insert a USB key with windows 10 iso on it. Or a cd with windows XP. He needs to have the HDD windows 8.1 original in it on first commissioning? It took a while to replace parts...

  Thanks in advance.

  That's very true, I used gparted before checking this again, and it was corrupted. Very well! I ended up installing windows 10 home using a free student license. It's perfect, since I have windows 8.1 before running on the 1 TB hard drive and it was filled with bloatware, thanks to HP (no offense). So, it is nice to have a clean install. Everything works fine now, I had to change some settings of 'Legacy Boot' in the bios to boot from the USB.

• XP does not start on the first try to start

  I just reinstalled XP Pro SP3 on new 250 GB HD HD partitioned C - equal D. DΘmarrage initialization stops and I have to hit reset in order to get Windows to load. Any ideas on what I should do to correct so machine will start on the first try.

  If the CMOS battery on the motherboard is dead, it may take two or three attempts to start re-namely configuration of the BIOS of your system.  If your time is incorrect immediately at startup, this could be another indication.  Look on your motherboard for a button size battery shift.  Check the documentation for the computer from the manufacturer of your Web site.

  You can also try a chkdsk with the repair operation (/ R) option if you have problems with your file system.
  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?

• Intermittently, jumping to the first and the second slide instead of the conditional action

  Hello

  I have an action on the first slide in my Captivate program (7 Captivate), (press Enter) which says that if your variable = this, go to a slide specific (v_lastmod = 1, jump to slide 4) and I have about 19 of these if statements in the action.

  What I notice is sometimes (intermittently) rather than to go to this particular slide, he would go to the first slide and continue on the second slide (and obviously not stop there since there is a pause button). If I click on update, then it reload again and go to the slide by the action.

  I tried to add a loop where the else statement repeated the action, just in case it might be a problem of preload? That doesn't seem to work. It would be just stuck on the loop. I also tried to add a preloader by default preload that Captivate and always intermittently it crosses the first slide and just keep to the second slide (unless I hit refresh, it will take me to the appropriate slide). I also tried to add Else, keep, but no change.

  Any ideas or suggestions?

  Thank you

  Ruth

  It is not a good idea to have such a pretty complicated advanced right action on enter to the first slide. It must be generated at run time and the offset is probably what you see. Try adding a short welcome slide before this slide, which has no action on enter. That might solve your problem in a simple way.

• When I include a Table of contents in my project and get an overview of the project, it always starts with a blank slide that contains an arrow to 'start '. That's fine, but I really want to start with the first slide in the deck. How to change that?

  The Captivate TOC suggests that the first slide must be 'System Basics title Page'. But instead, I get the screen below. You must click on the arrow to start the course. Not terrible, but I'd rather just start with my first slide. Ideas?

  

  If this isn't HTML, you will have to leave checked AutoPlay. Normally SWF-output supports automatic playback. Check the preview in the browser instead of draft Preview.

• CS6 flash does not start after the first time.

  Hello! I installed Flash CS6 creative cloud in a previous version to open some old files. It works fine the first time you open it. After you close the it and try to open again, it shows the popup flash for a second and she disappears. Same thing over and over. After you uninstall and install again it opens for the first time and same problem after that.

  Any thoughts?

  It worked:

  Navigate to:

  C:\Users\«yourusername»\AppData\Local\Adobe\Flash CS6\en_US\Configuration

  There is a file fontinfo.txt. This opens up in Notepad and remove all what it and save it, but before you start again Flash, change the properties of this file fontinfo.txt for read only so Flash cannot crush him again.

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 11 always starts playing the first piece of the library. How can I change this so the first song it plays is random or last played song.

  When I open Windows Media Player 11 the first song it plays is always the first song in my library.  I can't find the setting to change that to a song randomly or at the last song played before him close last time.

  You can try the function 'Restore media to start' of the Windows Media Player Plus! plugin.

• Only once at the start of the first image to sound

  I imported the sounds of my animation and visuals must be synchronized with the audio, they depend on each other. But whenever I need to replay to hear the audio, it only works if I start from the beginning. He is very good at the beginning, but I proceed with my movie, the more frustrating it gets. If I play in the Middle, the audio will be silent.

  I tried to find answers to this, I don't know if there is a simple option for this, or if this is a bug. Help, please!

  Sound can have different type of synchronization setting in the properties panel. To do what you want, you would normally define the flow, but that only works for AS3 documents, it is not available in HTML5 Canvas.

  If you are just an animation that will end in video, or just for the reading of office, use AS3 FLAS. If you do an animation for HTML5 Canvas, start with an AS3 FLA, do everything which animation to adapt the sound stream and then convert the FLA in HTML5 Canvas.