Satellite C660 is unable to start for the first time
I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K
For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).
Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.
The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.
If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.
He has not indicated in the error logs files
I did a full reinstall of HARD drive recovery system.
I did a full system reinstall from recovery DVDs.
I did a full system reinstall from DVD disk a hard new recovery.
I replaced the ram
I tried to update the bios, but get an error
BIOS version more than 200
Battery capacity over 10%
AC is attached
Hello
The description of your problem is, for me, quite confusing, and I do not understand your problem.
Can your notebook load and start the preinstalled operating system or not?
Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.
Tags: Toshiba
Similar Questions
-
Hello!
I recently bought this laptop with the intention to replace the hard drive (1 TB HDD 120 GB SSD), as well as upgrading the ram from 8 GB to 16 GB. The problem is that I have improved these things before you start for the first time. And now it complains that it cannot find a device boot, even when I insert a USB key with windows 10 iso on it. Or a cd with windows XP. He needs to have the HDD windows 8.1 original in it on first commissioning? It took a while to replace parts...
Thanks in advance.
That's very true, I used gparted before checking this again, and it was corrupted. Very well! I ended up installing windows 10 home using a free student license. It's perfect, since I have windows 8.1 before running on the 1 TB hard drive and it was filled with bloatware, thanks to HP (no offense). So, it is nice to have a clean install. Everything works fine now, I had to change some settings of 'Legacy Boot' in the bios to boot from the USB.
-
I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:
"Before you can use this feature, OneNote 2010 must start for the first time."
Restart the PC does not solve the problem either. How can I get the printer to work?
Hello pietpompies7
See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.
-
PR Pro CC 2014 not start (for the first time)
First CC 2014 wil not start on my iMac. (for the first time)
It shows:
"Adobe Premiere Pro coult not find capable video game modules. Please update your video display drivers and commissioning.
My iMac:
10.9.5 O.S.
3.5 GHz i7
32 GB 1600 MHz DDR3
Video:
NVIDIA Geforce GTX 780 m 4096 MB
I have foud a CUDA driver:
version 6.5.18
What should do?
Hello
Please introduce this place on your computer:
Click go on the top go to ~/library folder-Type and then go to the application folder - rename the old adobe adobe folder
return to ~/library then go to preferences and rename the old adobe adobe folder
Access documents and rename the old adobe adobe folder.
After doing this, you will be untied your sync settings and custom keyboard shortcuts and the effects, if any.
Thank you
Arjun
-
Firefox crashes while loading images for the first time after windows starts upward
every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
thing I tried
Start windows and Open firefox in safe mode (does'nt fix the problem)updated 13 solved the problem...!
-
Satellite L650D: how long I leave it on charge for the first time?
recently bought this computer series Toshiba Satellite L650D and I was wondering how long I leave on the royalties for the first time to power?
Help, please
Hello
My laptop is still connected to the power adapter, so would always charge the battery.
But usually the battery led turn green if the battery should be fully charged.
Let the adapter connected until this witness would turn to green or blue (based on the model that you bought for) -
I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?
Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.
Problem solved I guess.
-
for the first time using the do not know how to insert video to start editing
for the first time using the do not know how to insert video to start editing
First thing you need to know is that After Effects is not a video editor. First is to put some shots together to tell stories (that is changing), After Effects for creating those shots (compositing and Visual effects) and to create animated graphics.
To use AE, start here: starting After Effects
-
How much time must be recharged Satellite Pro U200-10 b for the first time
Hello
How long the computer laptop Saturday Pro U200-10 b should there be for the first time?
Kind regards
CCHi Christoph
That s easy. You must charge the battery for laptops up to the battery LED switches to green light or blue. I put t know exactly the LED on the U200 Pro colors.
A hint; all the details should be in the manual of the user who is always pre-installed on Toshiba laptops
There, you will find also information about the battery and manipulation.Concerning
-
iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot
Hi all
I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time. It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.
Here are the steps I've tried
1 restart by holding the power button and turning it back on
2. reboot into recovery by now cmd + R Mode
3. enter in disk utility
4 did not have a first-aider for my drive of fusion
5 tried by clicking file > open or remove encryption (both selections are greyed out)
6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)
7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.
I need help.
Thanks in advance
Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.
-
When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.
I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.
Step 1. Identify the make and model of the USB device.
Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.
-
How can I recover my pc for the first time that I bought?
Hello
How can I recover my pc for the first time that I bought? because my pc is so slow... I have a compaq laptop cq61... and I want to set up the first time... How can I? I don't have a recovery disk because when I bought it dosnt have a recovery in it disc. Please help me. Thank youHello
I'm happy to help you
Glancing at the screen shot you posted, your looks of partition fine recovery (recovery (D).
Save your files on an external hard drive or flash drive (depending on how many you have).
Once that is done, disconnect all connected to your PC, but the AC adapter.
Start the PC and the HP welcome screen, press the F11 key to start the Recovery dialog box and follow the prompts.
It should take 15 to 30 minutes and your PC needs to be restored to its factory settings.
Then just reinstall all programs and files that does not come with the PC.
You will need the files or the installation of program diskettes. You cannot back up installed programs and reinstall them using a backup.
Paul
-
Hello
I started using Windows 7 yesterday for the first time after using Windows XP since its release. A couple of things, first off I noticed lag and be ground everywhere instead travel windows autour mouse, move the mouse on the screen, etc. It will just freeze and jump around, is not no good whatsoever. I have a wireless optical mouse Logitech, maybe this has something to do with it, because I tried to install the software for the mouse, and I got a weird error and something not to be in the right place (very annoying). Nobody knows why, I'll have this lag? It's really annoying and never happened in Windows XP. Any ideas on how to possibly resolve this problem? Thank you very much.
Justin
Programmer for Sony Online Entertainment.
Try to use another mouse, or by downloading the new firmware drivers/mouse from Logitech for your current mouse. Have you noticed the behavior if you start in safe mode? Or if you perform a clean boot?
-
I get an error in XP mode everything works for the first time.
When you start XP mode (on win 7 ultimate) for the first time. "It makes it to the end of the installation, and then said' didn't install correctly, try again" ive linked result withsame several times. What can I do to get XP running mode?
Original title: XP mode (in win7 ultimate) installed, but mistakes so that "fisrt time put in place.
Hi VeryMetal8,
I would have you post your query in the TechNet forums because it caters to an audience of it professionals.
Your request would be more out there.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
Recover if you have questions about Windows in the future. We will be happy to help you.
Thank you.
-
Hi all
I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.
The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)
Save file entry: -.
< 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >
< 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".
javax.servlet.ServletException: could not start a deployment of servers of IDC.
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)
at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)
at intradoc.server.ActiveState.serializeData(ActiveState.java:221)
at intradoc.server.ActiveState.load(ActiveState.java:58)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone
at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)
at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)
at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)
at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone
at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)
at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)
at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)
at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)
at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)
Truncated. check the log file stacktrac full
Help, please.
Kind regards
Vipul
Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone
Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone
Have what version of the WCC you installed?
Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.
You have the time zone set to GMT0? This can be checked from the activestate.hda file.
Try the following solution to replace the zone on all had file on
/ucm/cs Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver
/ucm/cs-type f)
Maybe you are looking for
-
Update on power supply for Hp p7 - 1370 t.
Hi, I'm going to update my geforce gt 620 to a geforce gt 640 GDDR5 OEM, but my PSU is only 300w, I want a power supply 400w or more just to be sure, what PSU guys would you recommend for my computer. Thank you
-
I stumbled the llb attached windows API VI and want to use them, but they are stored in LV5.0 curious if anyone out there has any versions LV to save this LV6 llb or more so I can open it with LV8.6? Thank you!
-
Windows Live Messenger for Windows XP, hrOx80070643
Problem C:\Windows| Instaler\Messenger.msi
-
2114 error when you try to start or update of firewall
After loading adobe up to this day I can't start firewall or the date of
-
InDesign CC 2015 resignations on opening - tried all of the usual suspects
I had this problem before where InDesign closes immediately after opening. Before I wiped my system CC and cleaned the files using the 'Adobe Creative Cloud Cleaner Tool". This time I've trashed even manually my preferences as well. After 4 attempts