Compound arithmetic question GOLD...

Similar Questions

• Compound path question

  Apart from their use to cut holes in the forms, are there other reasons to create a compound path? They seem to be similar to a grouping of the railways so I was just wondering.

  They are not at all like groups. Transparent tracks get a trace in the layer panel, no container with sub-paths (as a group of the East). You will need desperately transparent trace when you want to make several paths clipping mask. Also for some operations of pathfinder with multiple paths

  There is a chapter in the manual which compared groups for the compound path for compound forms.

• Composed of different arithmetic table size

  Hi all

  I have two table with a different size,

  Table 1 table 2

  1                0

  1                0

  1                0

  1

  If compound arithmetic GOLD was performed on them, I went out

  1

  1

  1

  Is it possible that I can get

  1

  1

  1

  1

  Thank you.

  The filling is more easily done using "reshape the table." Here is a minimal code that fills the shorter array to the size of the longer of the two.

  

• multiple in a single frame case

  Hello

  I want to achieve such a function as follows in LabVIEW

  If (1<><><><>

  I = I ++ ;

  else if (9<><><><>

  I = I;

  on the other

  I = I;

  I tried to combine boolean several together, but it turns out be a huge "building", please someone here help me, thank you!

  You can have a case within a case structure structure.  Thus, the box structure located in the wrong box of the outermost case structure would be equivalent to the part of the code ElseIf.  It is not so complicated to install.  In your case, because the code inside each case is a simple calculation just passing on the data or change it, a few select statements would work as well.

  Where things are a bit more complicated is the assessment of your Boolean expressions since they consist of multiple comparisons related to the set.  But it's not that bad, as you have just about build Boolean logic using the primitives LabVIEW provides.  And since you have 4 conditions that all must be fulfilled for one of the Boolean expressions to be true, you can use the compound arithmetic node (available on digital and Boolean palettes) for fashion AND to combine several conditions.

  Give it a try, and then if you get stuck, post your VI and we can help you improve it.

• Why the blue wires turn orange when changing to subtract to divide the operation?

  Hi all

  I wonder what happened in my block diagram.

  I had an article that has had an operation of subtraction with numbers... I realized that I needed to divide by 2 rather than subtract long days here by two (summer)... and when I did, all turned orange wires before blue...

  I have a compound arithmetic by adding 3 numeric values to come... through a case statement... case 0 default transmits values through, case 1 divided by two...

  Is there a change of type of data here, I do not understand?

  Thank you in advance,

  Cayenne

  Divide an odd integer value leaves you with a decimal number. LabVIEW decides so it is best to use a floating point representation (double in this case) If no data is lost.

  There are several alternatives if you do not want to change your data type: function quotient & rest, scale of power of 2 function (in this one you will have to imagine a way to distinguish odd numbers if you need to)

  You can, of course, also to change the type of data in full after the division.

• Multi-entree Boolean vi

  Are there any Boolean vi which allow an amount any entries? As one 'or' vi which can take 4 + entries.

  Use an RC with 4 inputs. It's called the Compound arithmetic function and it is on the Boolean palette and digital. Right-click on it to change the Mode (Add, multiply, AND, OR, XOR).

• BlackBerry Smartphones IMAP - No support? Help, please.

  Yesterday, I became an AT & T customer and bought a "BOLD".

  I really love the phone, but unfortunately, I have a major problem with it.  I can't IMAP works correctly.  I have two IMAP accounts; one is Gmail, the other is a private account with my host.

  I configured both correctly (such as IMAP, pop3 no).  I followed the instructions on the Google site with care.  I searched the web and these forums and found hundreds of messages describing this problem, but not a SINGLE response.

  The problem is, to reiterate: IMAP is down.  When I receive an email on an IMAP account, it is pushed to my BB.  That's great.  If I read or delete it on my BB, it is adjusted correctly on the server.  However, if I read or delete this email on the server (via webmail or any other application functional IMAP), it remains unchanged on the BB.  Yes, I checked all the settings of 'reconciliation '.  'Removal of reconciliation', and al.  This box is absolutely worthless...  I thought at the beginning, maybe it was just questionable Gmail IMAP implementation, but my host IMAP server works the same way, so it's too.

  I installed the Google Gmail app, and even if it is very nice, there is some delay extreme in the update of the mailbox (like + 20 minutes), and by itself, it does not provide the notification icon of e-mail as the BIS email application is integrated at the top of the screen.  In addition to compounding this question is that if I go into the Gmail app and delete the new email, email REST still in the standard e-mail BB for this account folder.  In other words, don't always no IMAP synchronization removal.

  Bottom line is, it would seem that the timing of deletion (and read) with IMAP is one-way only: from BB to a server; but ever since the BB server.

  What I need to know is the following:

  (1) is there a way to make it work?

  (2) otherwise, this will to work correctly in the next few months?

  Should if the answer is no, then which option I return the phone and get a well designed?  I don't understand how the so-called top phone for e-mail cannot do something as simple as good IMAP synchronization.  MANY people use the IMAP protocol now are not corporate/exchange users.

  Any help/ideas on this would be greatly appreciated.

  Hi and welcome to the forums!

  rceee wrote:

  The problem is, to reiterate: IMAP is down.  When I receive an email on an IMAP account, it is pushed to my BB.  That's great.  If I read or delete it on my BB, it is adjusted correctly on the server.  However, if I read or delete this email on the server (via webmail or any other application functional IMAP), it remains unchanged on the BB.  Yes, I checked all the settings of 'reconciliation '.  'Removal of reconciliation', and al.  This box is absolutely worthless...  I thought at the beginning, maybe it was just questionable Gmail IMAP implementation, but my host IMAP server works the same way, so it's too.

  (1) BIS service supports only a way of reconciliation. The device can delete the messages in the Inbox of the account, but the reverse is not supported. Gmail does not support wireless read and unread status, unlike Yahoo, AOL. Hotmail and Ms OWA accounts.

  I installed the Google Gmail app, and even if it is very nice, there is some delay extreme in the update of the mailbox (like + 20 minutes), and by itself, it does not provide the notification icon of e-mail as the BIS email application is integrated at the top of the screen.  In addition to compounding this question is that if I go into the Gmail app and delete the new email, email REST still in the standard e-mail BB for this account folder.  In other words, don't always no IMAP synchronization removal.

  I assume you mean the gmobilesnyc app. You have an option of the application to turn the notifications so it will inform

  you when it arrives. (According to Google discussion site) With regard to the duration (20 +) minutes of update that is

  between the application mobile and Gmail. BlackBerry supports the soft, but gmobile is actually the front end fot traffic.

  Once again BIS does not support two way deletion and Gmail does not read and unread status.

  Bottom line is, it would seem that the timing of deletion (and read) with IMAP is one-way only: from BB to a server; but ever since the BB server.

  Yes as he covered the other two statements. BIS, does not delete in two ways. Gmail does not allow the State read / unread.

  What I need to know is the following:

  (1) is there a way to make it work?

  (2) otherwise, this will to work correctly in the next few months?

  Google is just now with the possibility to synchronize the calendar and contacts as well.

  In regards awaits BIS make one major technical change and system there revamping of Google on the Tower

  a dime are highly unrealistic and frankly short sighted. As a business person yourself you already seeing two

  large companies are a radical change in a month? The possibility isn't even a valid consideration.

  Should if the answer is no, then which option I return the phone and get a well designed?  I don't understand how the so-called top phone for e-mail cannot do something so simple as the IMAP synchronization is assured.  MANY people use the IMAP protocol now are not corporate/exchange users.

  I wish you could be a BlackBerry customer, but if the technology on BOTH sides of equations does not correspond to your

  cooperation needs that I guess you have to make a major decision. and implement it in a month.

  I sincerely hope that the 'grass is greener on the other side of the fence", but I sincerely doubt it.

  If please be informed or reminded that I am not a RIM job.  I am a user like yourself. If you want some

  technical documents in support of the thesis point I'll be happy to give them. Please let me or other usesrs know if you

  need more information. Here's the number free of charge for RIM 877-255-2377.

  And so the email address: [email protected]

  Thank you

  BIFOCALS

• How to rebuild a spatial index partition that is marked 'INPROGRS '.

  I'm on 12.1.0.1 Enterprise Edition.

  I have a very large table of sdo_geometry objects that I divided it into several partitions.  I have create a spatial index on this table as UNUSABLE and then rebuild the partitions across a few different sessions.

  In total, the construction of index takes a few days.  Last week during the construction of the index, the database crashed completely.  This left me with most of the scores with a USER_IND_PARTITIONS. USABLE STATUS, some with UNUSABLE and a couple with INPROGRS.

  I can rebuild the UNUSABLE partitions as usual, but when I try to build a INPROGRS partition I get:

  ERROR at line 1:
  ORA-29952: cannot issue DDL on a domain index partition marked as LOADING
  

  The mistake is understandable, given that the index partition was INPROGRS when the database crashed.  The question is how to recover from it.  The doco says:

  Expect that the index partition operation complete question GOLD FORCE INDEX DROP to remove question OR index an ALTER TABLE DROP PARTITION to delete the partition.

  None of these options are good for me.  I don't want to let down the entire index as most of it is built.  It doesn't seem to be an option to recover a partition of index construction which is blocked at INPROGRS.

  
  

  Support Doc ID 557600.1 addresses this issue says in the context of the Oracle text index.  Sa dit :

  Sometimes, if CREATE INDEX or ALTER INDEX fails, an index can be left with the status of LOADING or INPROGRS and let the context index in an unusable state.

  Any attempt to retrieve using SUMMARY INDEX is blocked. The only recourse is to drop and re-create the index.

  In this case, use CTX_ADM. MARK_FAILED to force LOADING failure index status so that you can retrieve the index with the INDEX of CURRICULUM VITAE.

  If the suggestion is to use CTX_ADM. MARK_FAILED ( http://docs.oracle.com/database/121/CCREF/cadmpkg.htm#CCREF0500 ). 

  There is a similar option for spatial indexes?

  Thank you

  John

  Hi John,.

  Have you tried mdsys.reset_inprog_index (owner IN varchar2, varchar2 IN index_name)?

  This procedure will erase INPROGRS and to FAIL if index or index partition is INPROGRS.

  Thank you

  Ying

• Creating a Contact form

  Hi all

  I got the code on the www.getbootstrap.com site to create a basic contact form below. But I noticed there is no built in Captcha. Is Captcha need because I go account when you don't have it, you get a lot of SPAM emails. If so how is this possible?

  Thanks in advance.

  iangoulbourne wrote:

  Hi all

  I got the code on the www.getbootstrap.com site to create a basic contact form below. But I noticed there is no built in Captcha. Is Captcha need because I go account when you don't have it, you get a lot of SPAM emails. If so how is this possible?

  Thanks in advance.

  CAPTCHA is not strictly a necessity because many are difficult to read and generally more problems than what they are worth. However, you should consider including something like a simple arithmetic question/answer.

  There is not "under the code" in your message.

• change conversion

  Hello

  My program made some changes.

  Everything works fine, but not this amount: $2.05.

  Instead of giving 5 cents, it gives 4 cents.

  I don't understand why. It's my code.

  TKS a lot.

  Cuckoo.

  package {}

  import flash.display. *;

  import flash.text. *;

  import flash.events.MouseEvent;

  SerializableAttribute public class U1A4_Monnaie extends MovieClip {}

  private var monMessage:TextField = new TextField;

  private var maMiseEnForme:TextFormat = new TextFormat;

  private var montantAffichageFormat:TextFormat = new TextFormat;

  public void U1A4_Monnaie (): void {}

  btnSoumettre.addEventListener (MouseEvent.CLICK, calculeMonnaie);

  }

  private void calculeMonnaie(event:MouseEvent):void {}

  Nei of the window change

  maMiseEnForme.font = "Tahoma";

  maMiseEnForme.size = 14;

  maMiseEnForme.color = 0 x 000000;

  maMiseEnForme.leftMargin = 20;

  maMiseEnForme.rightMargin = 20;

  montantAffichageFormat.bold = true; Format the display of the total amount

  monMessage.x = 200;

  monMessage.y = 45;

  monMessage.autoSize = TextFieldAutoSize.LEFT;

  monMessage.defaultTextFormat = maMiseEnForme;

  the var sum: number;

  var totalCents:int;

  var pieces200Cents:int = 0; Add the variables pour $ 1 and $ 2 parts

  var pieces100Cents:int = 0;

  var pieces25Cents:int = 0;

  var pieces10Cents:int = 0;

  var pieces5Cents:int = 0;

  var pieces1Cent:int = 0;

  var remainder: int = 0;

  var nouvMessage:String;

  sum = Number (montant.text);

  totalCents = int(somme * 100);

  pieces200Cents = totalCents / 200; Addition of the calculation of the amount of $ 2 coins

  remaining totalCents = 200;

  pieces100Cents = remaining / 100; Addition of the calculation of the amount of $ 1 coins

  remaining = totalCents % 100;

  pieces25Cents = remaining / 25;

  remaining = totalCents % 25.

  pieces10Cents = remaining / 10;

  remaining = remaining 10%;

  pieces5Cents = remaining / 5;

  remaining = remaining 5%;

  pieces1Cent = remaining;

  amount. Text ="";

  nouvMessage = ("$ \n2:" + pieces200Cents + / / display new amounts)

  "\n1 dollar:" + pieces100Cents + "."

  "hundred \n25:" + pieces25Cents + "."

  "hundred \n10:" + pieces10Cents + "."

  "hundred \n5:" + pieces5Cents + "."

  ("hundred \n1:" + pieces1Cent + "\n");

  montantAffichage.defaultTextFormat = montantAffichageFormat;

  montantAffichage.text = "$" + somme.toFixed (2) m:System.NET.SocketAddress.ToString (); Display the given amount

  monMessage.text = nouvMessage;

  addChild (myMessage);

  }

  }

  }

  You probably use a binary arithmetic question with your definition of totalCents.  try to use Math.round () instead of int.

• Image in question on the shipment of gold

  So when we send the image to dell gold should have the driver's cab or just the .wim? Send us a hard drive, when we finished, but I was wondering if we need to restore the image or with the taxi driver. We have 2 different models, we are ordering a latitude 3440 and 7020. At least he can to put both of these cabins of driver on that hard drive.

  Hi Prescotta-

  Thanks for the question.  Everything what you send to Dell is the WIM image was created and captured by the Image toolset help.  The Dell factory process allows to detect the model of system order you and inject the latest drivers for your 1st boot image production.

  In summary, the Image toolset help will create a system image Windows Sysprep (which has unattended installation you selected during the process) that can be redeployed to the Dell for several types of model plant and the chassis.  Reference Dell will always ensure that you have the latest drivers for the platform that you order.

  Tyler

• Question related to the Xbox live gold connection

  UH I have the same problem my friends and my brother is on but I tried everything and I have an amazing connection but there must be something with all of your servers, I wanted to do was play my last day of gold but it won't let me connect after this update of the system, but it's a bit inconsistent and this happened to me like 6 times I'm already about to get rid of my Xbox but I really like Microsoft. Can u pls find a problem with my Xbox live problem

  Hi Mark,

  My apologies for the delay in response. For help on this issue with the Xbox, you can post your request here:

  http://forums.Xbox.com/

• Question PLSQL with variable compound column names

  Hello gentlemen,
  

  
  

  I'm new to PLSQL and I would like to display some values of columns, which are listed in the defined variable in dbms.output. I created under code, which I think it could work, but I guess that it is far from correct.

  
  

  DECLARE
v_TEMP_QUERY VARCHAR2 (1000 BYTE);
v_TEMP_VALUE VARCHAR2 (1000 BYTE) := 'FILTER_01, FILTER_02';

BEGIN  
FOR v_TEMP_LOOP IN
(v_TEMP_QUERY := 'SELECT DISTINCT ' || v_TEMP_VALUE || ' FROM CW_PAGE_COMPONENT_TEMPL WHERE COMPONENT_TEMPL_ID = 10000034642';
EXECUTE IMMEDIATE v_TEMP_QUERY; )
LOOP
DBMS_OUTPUT.PUT_LINE (v_TEMP_LOOP.v_TEMP_VALUE);
END LOOP;
END;

  
  

  Thanks in advance for your help and advice on this issue and sincerely,

  Sebastian

  OK, first of all, you're confused concepts here.

  cursor loop FOR waiting for a slider must be provided, and yet you offer an assignment statement and a command immediately execute for it.  Syntax is not valid.

  Secondly, you force the way of the use of dynamic SQL, which is generally bad practice.  This use of the SQL is rarely necessary, because it often indicates that functional requirements, database design, or design/code enforcement has not examined properly... the first question is "why don't you know the names of the columns to select.  With dynamic columns in your query, you need some kind of dynamic code to manage the results of the query, you will not be able to reference the columns directly by name.

  Thirdly, the DBMS_OUTPUT package doesn't make "blank".  This may sound pedantic, but it's a common mistake that people make.  There is no fill data dbms_output buffer.  It relies on call code/interface to read the contents of the output buffer and display it in fact (for example, in SQL * more you use SQL * Plus the command "set serveroutput we ' to achieve)

  In general, in a well designed where application you know your columns you would only make...

  Start
  I'm in (select distinct filter_01, filter_02 from vw_page_component_templ where component_templ_id = 10000034642)
  loop
  dbms_output.put_line (i.filter_01 | ',' | i.filter_o2);
  end loop;
  end;

  If the columns are dynamic, then you have three options:

  (1) create a ref and pass cursor who back, extracting the content for example

  sys_refcursor getRc function returns (in numbers, in colnames templ_id varchar2) is
  RC sys_refcursor;
  Start
  Open rc for ' select distinct ' | colnames |' from vw_page_component_templ where component_teml_id =: 1' using templ_id;
  return rc;
  end;

  In SQL * more:

  var r refcursor; -It creates a variable in SQL * Plus ref cursor type
  Start
  : r: = getRc (10000034642, ' filter_01, filter_02');
  end;
  /
  print r;      -It's SQL * command to retrieve the cursor open and display the results

  (2) create an object and collection of the right structure to receive the results and use execute immediate to select IN this structure.

  (I will not show in this way, because it is absolute rubbish, and if you know the columns that you want to create the object and the collection, then you should not use dynamic SQL in the first place)

  (3) use the DBMS_SQL package to run the query and retrieve the data from the column in position rather than example:

  create or replace procedure run_query (p_sql IN VARCHAR2) is
  v_v_val varchar2 (4000);
  number of v_n_val;
  date of v_d_val;
  number of v_ret;
  c number;
  number d;
  whole col_cnt;
  Boolean f;

  
  rec_tab dbms_sql.desc_tab;
  number of col_num;
  v_rowcount number: = 0;
  Start
  -create a slider
  c: = dbms_sql.open_cursor;
  -analyze the SQL statement in the cursor
  DBMS_SQL. Parse (c, p_sql, dbms_sql.native);
  -run the cursor
  d: = dbms_sql.execute (c);
  --
  -Describe the columns that are returned by the SQL statement
  DBMS_SQL. DESCRIBE_COLUMNS (c, col_cnt, rec_tab);
  --
  -Local variables Bind to return to the different columns according to their types
   
  dbms_output.put_line (' number of columns in the query: ' | col_cnt);
  1.col_cnt j
  loop
  case rec_tab (j) .col_type
  When 1 then dbms_sql.define_column (c, j, v_v_val, 2000); -Varchar2
  When 2 then dbms_sql.define_column (c, j, v_n_val);      -Number
  12. When can dbms_sql.define_column (c, j, v_d_val);     -Date
  on the other
  DBMS_SQL.define_column (c, j, v_v_val, 2000);  -Any other type of return as varchar2
  end case;
  end loop;
  --
  -Display columns are returned...
  dbms_output.put_line ('- Columns-');
  1.col_cnt j
  loop
  dbms_output.put_line (rec_tab (j) .col_name |') -' || case rec_tab (j) .col_type when 1 then 'VARCHAR2 '.
  When 2 then 'NUMBER '.
  When 12 can "DATE".
  "Otherwise, 'Other' end);
  end loop;
  dbms_output.put_line('---');
  --
  -This part generates the DATA
  loop
  -Retrieves a row of data using the cursor
  v_ret: = dbms_sql.fetch_rows (c);
  -Output when no more line
  When the output v_ret = 0;
  v_rowcount: = v_rowcount + 1;
  dbms_output.put_line (' line: ' | v_rowcount);
  dbms_output.put_line('---');
  -Extract the value of each column of the row
  1.col_cnt j
  loop
  -Fetch each column to the correct data type according to the description of the column
  case rec_tab (j) .col_type
  When 1 then dbms_sql.column_value (c, j, v_v_val);
  dbms_output.put_line (rec_tab (j) .col_name |': ' | v_v_val);
  When 2 then dbms_sql.column_value (c, j, v_n_val);
  dbms_output.put_line (rec_tab (j) .col_name |': ' | v_n_val);
  12. When can dbms_sql.column_value (c, j, v_d_val);
  dbms_output.put_line (rec_tab (j) .col_name |': ' | to_char (v_d_val,' DD/MM/YYYY HH24:MI:SS'));))
  on the other
  DBMS_SQL.column_value (c, j, v_v_val);
  dbms_output.put_line (rec_tab (j) .col_name |': ' | v_v_val);
  end case;
  end loop;
  dbms_output.put_line('---');
  end loop;
  --
  -Close the cursor, now we're done with it
  DBMS_SQL.close_cursor (c);
  END;
  /

  SQL > run_query exec ('select ename, empno, sal, deptno from emp where deptno = 10');
  Number of columns in the query: 4
  -Columns-
  EMPNO - NUMBER
  ENAME - VARCHAR2
  DEPTNO - NUMBER
  SAL - NUMBER
  -------------
  Line: 1
  --------------
  EMPNO: 7782
  ENAME: CLARK
  DEPTNO: 10
  SAL: 2450
  --------------
  Row: 2
  --------------
  EMPNO: 7839
  ENAME: KING
  DEPTNO: 10
  SAL: 5000
  --------------
  Row: 3
  --------------
  EMPNO: 7934
  ENAME: MILLER
  DEPTNO: 10
  SAL: 1300
  --------------

  PL/SQL procedure successfully completed.

  As you can see with this method, you can extract the column details, including the name and data etc. types and then extract each line and extract the data from the column position.

  Of course, this is quite complex, so it would be a last resort.

• Question image gold

  Y at - it no problem using the same image or VM for two different pools? I want to install a second pool related to the same machine or used for my main pool of VM image, so I can test the updates to the image gold before pushing changes to.

  Absolutely no problem. You can still use the same image of gold.

  And if you choose the same data store that you used to deploy the first pool, then the funding pool will be fast enough because it uses the same replica-vm. In this case, you can consider the replica clone ratio also for best perfomance

• Basic question Support (gold)

  Hi all

  I have the basic support subscription.

  They're fun configuration question/help?

  Or will they just direct me to different PDF and/or training / Forum? ^^

  Thank you.

  you have the phone/web support.  Yes, your offer of support includes the problems of configuration on a 12 x 5

  http://www.VMware.com/support/services/basic.html

  http://www.VMware.com/support/services/overview.html