Comps before turn sweet when it is assembled in Master comp

Similar Questions

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• MBP turns on and turns off when plugging in/out

  Hi all

  I had a problem with my MacBook Pro mid 2012 since I got it. I started with Mountain Lion and have recently upgraded to El Capitan. Same problem on all releases. I assumed it was a feature, but it really starts to get boring.

  When my MacBook is in mode 'sleep' (closed or open, is not serious), whenever I plug the power chord, or it just turns and then fall back to sleep after a few seconds. I know that MacBook have a sort of hybrid of special standby/hibernation where they also record the State of the hard drive, but why should it turn on when I pull the power cord? This is especially troublesome when I travel. I want to just pull the cord and put the MBP in my bag. But no, I have to wait until she returns from his sleep, and again, without the risk of possible damage/failure of HARD drive.

  I hope someone has a solution or maybe just an explanation for it.

  Thank you!

  It is safer to stop any computer before departure.  Why it does what you say it does let you guess.  Not all models for this.  I tried to address this during your first year of ownership or Applecare and not 4 years later.  In addition, your PRAM Battery or the main battery may be soon need replacement, and who could do to issues of power more.

• Satellite U400 won't turn on & when we will not sleep mode

  I have a Satellite U400 and is a year and a few months.

  In the last few it was in place, and it started when the computer goes to sleep and goes to the black white screen, it will not fall.
  The only way to do anything is held in the power up to what it turns off and then back on. This brings me to the warning screen that I turned off my computer incorrectly. It was actions also for a few weeks and randomly started unexpectedly.

  Then just today it does at all, I was pressing the power button and the key itself would be lit up and on the right side of the small lights would light up but don't turn on, I kept pressing it again and again and again and finally it turn on. Once on, I used only for a few minutes before turning off again and then do the same thing, I kept pressing the bottom until it works. Its been on now and has not extinguished again.

  There not in the newspaper I had to reformat my computer because I forget my password and had put me out of the computer. About a week after that is when the problems started. I'm not all that clever computer, to be honest, I do not understand something of things, I can follow step by step to do something.

  I really want to pay to have it fix I just want myself and as soon as its in great shape and never had any problems before.

  Does anyone have any idea what this might be, or why it might be?

  I think about reformatting again because I'm worried that didn't work right the 1st time or something.

  Or if it's something that needs fixing someone have any idea on the cost of it?

  Thanks ^_^

  Hi aev270,
  sounds like a serious problem for me.
  Try the following: take out the battery, cd-rom, hard disk, and then try again.
  If it starts without this items - you lucky!
  This means that it is probably a software problem (but I think not - sorry)
  you see the toshiba logo / messages from the bios? No - the you're in trouble.
  This strange behavior may depend on many things: defektive components such as ram, grafics... nor (badest) motherboard...
  If you have still warranty on this subject, you should go to a having servicepartner check installation.

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15 Notebook: Wifi does, said feature WiFi is turned off when it is, in fact, on?

  My wifi suddenly turned off, when I troubleshooted it says that wireless capability is turned off and when I went to turn it on, it was already activated. I tried many things including updating almost everything, but nothing seems to work. Help.

  Hi @Elexia,

  Nice day. Forums can accommodate you! Is a great place to find resolutions. I read the post about wifi, HP 15 laptop connectivity problems. I'll be happy to help you here.

  Impressive work on diagnosing the problem properly and perform troubleshooting before asking your question on the forums of HP. Kudos to you on this point. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP and it's a real pleasure to help you here.

  First off the power we need to properly diagnose if the problem is hardware or software partners.

  For clarity and to help you the best I would need more information in this regard.

  Please provide the model # complete computer.

  • When there is this first begin?
  • Any hardware changes were made such as changing the router or modem?
  • Has it started after any update an application or software? (windows, HP or other applications such as security applications)

  If the event is recent, you might want to try a system restore to a work date known well before the problem occurred. Link for restore: http://support.hp.com/us-en/document/c03327545

  If it does not please visit these links to help: http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/8499326/model/8942890/document/c04649175/

  Link 2: http://answers.microsoft.com/en-us/windows/forum/windows_10-windows_store/windows-10-wireless-capability-is-turn-off/18d989f9-bf2e-4477-b361-52a6ba4b88b3

  Link 3: http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Common-fixes-for-wireless-connectivity-issues/m-p/4831601/highlight/true#M86871

  Link 4: https://support.microsoft.com/en-in/help/10741/windows-10-fix-network-connection-issues#network-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  If none of these work, please use a wired Ethernet cable and update the bios, the chipset and Wi - Fi drivers from this link: http://hp.com/drivers that relate to your computer.

  As a last resort, please save all your data and run a recovery system to factory default this link: http://support.hp.com/in-en/document/c04758961

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Change selectBooleanCheckbox before turning off

  Using JDeveloper 11.1.1.3
  
  I have a JSPX with some selectOneBooleans on it. I also have a selectOneChoice. Given the value selected from the selectOneChoice, checkboxes should be disabled. Before turning off, I need to deselect them.
  
  All boxes have a partialTrigger to the selectOneChoise.
  This is the code I use in the valueChangeListener
  

      public void valueChange(ValueChangeEvent e) 
      {
          System.out.println("Setting new values");
          if(e.getNewValue() != null){
            PlantType type = (PlantType)e.getNewValue();
            if(type.getCode().equals("PLANT")) {
              plant.setIsWild(false);
              plant.setIsCultivated(false);
              plant.setIsList1(false);
              plant.setIsList3(false);
              chkWild.setDisabled(true);
              chkCultivated.setDisabled(true);
              chkList1.setDisabled(false);
              chkList3.setDisabled(false);
              
            }
            else if(type.getCode().equals("FUNGUS")){
              plant.setIsList3(false);
              chkList3.setDisabled(true);
              plant.setIsListedAsterisk(false);
              chkAsterisk.setDisabled(true);
              chkWild.setDisabled(false);
              chkCultivated.setDisabled(false);
              plant.setIsWild(false);
              plant.setIsCultivated(false);
              plant.setIsList1(false);
              chkList1.setDisabled(false);
              
            }
        }        
      }

  An example of a checkbox control:

  <af:selectBooleanCheckbox id="wild"
          text="#{bundle.plant_wild}"
         value="#{pageFlowScope.plantBackingBean.plant.isWild}"
         binding="#{pageFlowScope.plantBackingBean.chkWild}"
         partialTriggers="plantype"/>

  This is what is happening in the UI:
  When I select all the boxes and move from fungus to plant, disabled checkboxes keep activated.
  When I change of BOF plant to fungus, they are unchecked.
  
  I'm doing something wrong here?
  I also added a few exit my plants and my grain of support to find out when the getters and setters are called:
  
  When I change from fungus to plant, it is the output:
  Definition of new values
  Raging boolean
  Raging boolean
  
  I get the same when I go from plant to fungus so I do not know that the EL really returns the correct value for the checkbox control.
  Maybe this could be a problem because I turn off the box and therefore does not allow the change of the user interface or something like that?
  
  How can I solve this problem?

  If immediate = "true" = "true" autoSubmit is set to the SelectOneChoice it is a partial trigger for the boxes, and then set immediate = "true" on the checkboxes too, if phase JSF "Update Model" would be ignored of the boxes.

  Dimitar

• How to turn on when it is not automatically translate?

  How turn on when it is not automatically enabled to translate? Visited a blog (RSS feeds) that did not Translate function.

  Make use of the Google Translator Toolbar

  Otherwise, use Firefox Addons

  • https://addons.Mozilla.org/en-us/Firefox/search/?q=translator

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• Satellite A100-049 - how can you stop it turn on when you open the lid?

  I don't see any option to stop this in the BIOS or otherwise but it annoyingly turns on when you open the lid. I stopped it turn off when you close the lid, but prefer that he remained turned off when you open the lid.

  Any ideas?

  Hello

  I assume you are using the Vista operating system.
  Have you checked the Power Options OS located in the control panel? Do it!

  But a question; Why you use n t stop him if you n t want to turn on the laptop by opening the cover.

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• iPAQ turns off when taken off the coast of the Office docking station

  My hp iPAQ PDA (model 4155) began to turn off when I take it off the cradle of office.  I don't see any options or settings to correct this.  Please notify.

  Sounds to me like the battery takes is no longer a burden.  You can probably find a new battery for your iPaq by searching on the internet.

• I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.

  I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">