Computer, burn the CD, but says it's empty

I need to burn a PDF on a CD, so I used the tool and the Windows Explorer, with the first CD, went through all the normal process but, in the end, it eject the CD and was told that an error has occurred. OK, I thought there was a problem with the CD itself. So I went to another CD, and this time it was burnt successfully. But my laptop says that the CD is empty, even if he comes it burned! The computer to my work, also said that the same CD is empty.

Then I decided to test a third CD, burning music instead. I used Windows Media Player and it burned the CD successfully. But again, my laptop says that the CD is empty, even though it plays fine on my radio and my DVD player.

It's a strange problem, because my laptop plays any CD normally.

I wonder if it is a driver problem? What is the physical support (since the CD I tried to burn were all the same)? Does anyone else have this problem?

My laptop has Windows 7 Ultimate 32-bit, and I've only used the Windows native tools to burn the CD.

Thanks in advance.

HI - have you checked in 'Computer' ' CD/DVD Drive' in 'Properties' with one of the inserted discs? What you see on the pie chart? -Thank you, R.

Tags: Windows

Similar Questions

  • Computer recognizes the printer, but does not install

    Original title: printer / driver problem

    My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

    Hello

    You did it of any material changes or software on the computer before this problem?

    You can follow this link completely and check if the problem persists.

    Printer in Windows problems

    Hope the helps of information.

    Please post back and we do know.

  • my computer has the power, but it does not start.

    my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

    Hi moozer_890


    1 during how long have you had this problem?
    2. have you updated display drivers installed on the computer?

     

    Method 1 :
    To resolve the problem, you can see if the uninstall and reinstall then the display driver-
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Method 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

     

    I hope this helps.

  • I can't use my external hard drive from toshiba on computer in the window, but I can use it on apple.

    I can't use my external hard drive from toshiba on computer in the window, but I can use it on apple. Is there someone who can help me solve it I will be grateful for it :)

    When it is connected to the PC, it is visible in disk management?

    Was this a drive that has been formatted using your Mac with the mac file system? If so it will not turn on the PC, without the use of third party software

  • My disc drive tells me what drive is in it, but says it is empty for all discs. What could be the problem?

    I put in a disc and go to the media, he tells me what disc is in but says it is empty.

    You can try running this:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  • print jobs in the queue from the computer to the top, but do not print

    1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

    chrismcgo wrote:

    I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

    I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

  • went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

    went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

    Hello

    Maybe it's an activation issue, please see the link https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    Kind regards

    Gag

  • Media Player does not burn the CD, it says 'clean the disc or use of other brand of blank disc '.

    Why media player usually burn the audio CD? It says need to 'clean the disc or use another brand of blank disc' - what l'H@&& is that?

    Hi me,

    -You receive this error message while you try to burn a CD/DVD? Or is it specific to any particular CD/DVD?

    Follow the steps listed in the article given below to resolve this issue:

    Windows Media Player Error Message help

  • Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

    Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

    To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

    Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

    ipconfig/release

    ipconfig/flushdns

    ipconfig / renew

    Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • changed name of computer on the network, but an old still appears

    My computer on the network was named with an employee of the previous.  I went and changed my computer name, how ever the old computer name is also still on our network.  I can not connect, so I know that it does not work and my new named a.  But how can I remove the old named computer, so it does not appear on our network.

    It will disappear in a short time.

  • Try also install Windows XP on a portable computer and the process it says miss me 4 .xml files.

    I am installing Windows XP on a laptop.  The system stops at various points and wrote that a file is missing.  The files are listed below.  Could not complete the loading process.  I check my PC Tower and the files are on it, and I've copied to a USB flash key.  Can I use these files on the laptop?  I would like to use the CD that comes with the Tower, but it is cracked and I ordered a replacement of Microsoft.     HELP

    ipcfg. XML

    cmnicfgh. XML

    OSINFO. XML

    potscfg. XML

    Hi kenny38,

    Sorry for the delay. Try the tip in the link below to perform a "Clean Installation" of windows XP

    How to install or upgrade to windows xp.

    http://support.Microsoft.com/kb/978307

    For tips on troubleshooting Setup errors, see the link below.

    How to troubleshoot an XP Installation fails.

    http://support.Microsoft.com/kb/950718

    Let us know if that helps.

  • XP USB Drive > Vista see the files, but think they are empty

    I have a new computer with Vista.
    In 'Computer', it shows the drive as being:
    Local disk (g)
    37.3 GB free of 181 GB
    It shows the directories but think that the folders are empty.

    The drive is a XP computer.

    What should I do to display the files in Vista?

    Thank you.
    Tony

    OK, time to feel stupid. It was a problem of USB Port on the Vista machine.
    Problem solved.

  • Start the computer to the top, but before the office back I get a black screen for 5 to 15 minutes long.

    Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."

    I don't know the problem, looking it up and this is an annoying problem.

    Hi InterestedLearner,
     
    -Have you done recent changes made to your computer before this problem occurred?
     
    Updated the graphics driver and check if it helps fix the problem.
     
    Visit the manufacturer's Web site to do the same.
     
    Take a look at these items as well for more information on updating a driver:
  • Ping the computer of the user but does not '\\user\d$ '.

    Hello friends,

    I have a problem according to the files and folders in my network.

    A Client PC using windows xp. Ping PC correctly but the '\\user-PC\c$' does not. Also not connect to vnc viewer.

    Hi David,

    Thanks for posting your query in Microsoft Community.

    From your problem description, I understand that you have problems to access the XP client computer.

    The question you have posted is related to networking, it would be better suited to the TechNet community.

    Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

    I hope this helps. If the problem persists or all linked windows queries or issues related to the Windows operating system, please get back to us. We are here to help you.

  • HP 5740 all-in-one: computer recognizes the printer, but not to scan

    My computer HP Envy Phoenix 810-470pc will print and fax, but not to analyze my HP 5740, I can scan from the printer and send it to the computer, but cannot scan to the computer, I reinstalled the software and it hooked up via usb, but it still does not work. Windows 10.

    Welcome to the HP community @retiredrudy,

    I read about the problems you are having with the scanning from or to your Officejet on Windows 10 5740. See the link below and try all the steps in order and you should be able to scan in progress!

    Let me know if you encounter any questions!

    HP printers - "no Options of Scan" or "scan settings do not value" message (Windows 10)

    Best wishes to you!

    Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

Maybe you are looking for

  • Australis...

    Australis is Firefox for Kidz! [Profanity and personal attacks, removed by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  • Impossible to search iTunes Store on iPhone

    When it is on my iPhone, iOS 9.3.2,and 6V I can't call the search functionality in the iTunes Store. I used to be able to do it, but not now. I see same as any music/movies/TV shows if I wanted to buy a. I can check my status of download (but there i

  • Satellite A300: Option to "Wake on Wireless LAN" disabled in the BIOS

    Hello I have a laptop Satellite A300-230 and in the BIOS, the option (under Advanced) to toggle the * Wake on Wireless LAN * is disabled and grayed out with no way to change it. Why is it so? How can I activate it? BIOS version is 2.20 (later). Thank

  • How to partition the HARD on Satellite L300 drive?

    I'm crazy little go! I just bought a laptop L300 and I was totally reassured I was able to partition the drive. I have partitioned many readers in my life and know what I'm doing (for the most part)-, but this one - I can send it to the store. It has

  • Phone serial number

    OK, so the IMEI # on my phone under settings > about phone > status > IMEI. A figure more than the # hex that you get by putting * #06 # on your Dialer. Where are you supposed to use when registering your product on these forums?