Computer can not sleep when Fireworks running due to waketimer

Similar Questions

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Received notification that my computer has not been configured to run IPv6. How to activate it?

  original title: help with IPv6

  I received a notification from yahoo that my computer has not been configured to run IPv6 properly and that this IPv4 will not be available much longer, so I need to update in order to continue to access the internet. Is this a correct information? I'm under edition family vista with service Pack 2 and the system is about 3 years old. I installed an update within the last few months. If I need to update microsoft will release updates or will it be found elsewhere? Thank you

  Laura

  Hello

  Don't worry, IPv4 will be here for many years to come.

  In any case, IPv6 on Vista is not a simple matter, it can be used by it takes a while to set up.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ce286032-4DF0-4D53-A21e-1590e9280fef

  Win 7 is IPv6 ready out of the box.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Members parents not updated when you run tot.

  I have a scenario where even if low level members change the parent members are not updated when we run an agg
  
  For example, if low level member was 150 and we run the aggregate numbers are fine. If the Member of low level is passed to #Missing parent members are not updated when we run the tot.
  
  IN the script below, we use DIM(COstCenters,SpaceTYpe) CALC
  
  My concern is the SET FRMLBOTTOMUP ON setting I use, because it looks like he will ignore this block. How can solve this problem without affecting the performance too. For example using SET CREATEONMISSINGBLK WE could help, but will have an impact on performance
  
  Here are the details of the script
  
  SET MSG SUMMARY;
  SET FRMLBOTTOMUP
  SET CALCPARALLEL 4;
  
  DIFFICULTY ('Budget', 'Version1', 'Ex2011', 'RSF', 'No_Period', 'M3', 'M6', 'M9', "M12", @IDESCENDANTS("$1"), @LEVMBRS
  (SpaceType,0), @LEVMBRS(CostCenters,0))
  DIM CALC (ManagedBU, AllocatedBU);
  
  ENDFIX
  
  
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", AllocatedBU, ManagedBU,
  @LEVMBRS(SpaceType,0), @LEVMBRS(CostCenters,0))
  
  "$1";
  
  ENDFIX
  
  
  / * Aggregating numbers for the report so it could be read n a high cost central level * /.
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", @IDESCENDANTS (AllocatedBU), @iDESCENDANTS (ManagedBU), @IDESCENDANTS("$1")
  )
  
  DIM(COstCenters,SpaceTYpe) CALC;
  
  ENDFIX
  
  
  / * Numbers for the concentration ratio so it could be considered a regional high-level * /.
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", @IDESCENDANTS (ManagedBU), @IDESCENDANTS (AllocatedBU), @IDESCENDANTS (SpaceType), CostCenters)
  
  @IANCESTORS("$1");
  
  ENDFIX

  The first thing I would try would be to add that the parameter SET to AGGMISSG. IF the database is set to off then if all children of a member are missing then the parent will retain its value. If aggmissing is enabled, then it always overwrites the values parent with the calculation of the values of the child.

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• I just brought LR and PS CC but I can not install Adobe Creative cloud due to error code 201 or 214 how can I solve this problem?

  I just brought LR and PS CC but I can not install Adobe Creative cloud due to error code 201 or 214 how can I solve this problem? I try everything but it does not work.

  Hello

  Please see the help document that below that explains the error Code 201:

  Download error, installation or update of Cloud Creative applications

  You can also see the thread below where this issue has been addressed:

  Error 201

  Error 201; CC constantly disconnected desktop application, will not download again

  Kind regards

  Sheena

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• I bought the HP 7 window to Malaysia & it works normal, but when I'm at home in Myanmar, my computer can not activate because limited geographically with error code 0xC004C017 code

  Dear Sir.

  I can't activated Home Premium window 7 in geographically limited right, about, I bought Home premium Windows 7 in Malaysia & normal work but when I got to the House of myanmar, my computer some problem & I do factory setting of window 7 activate the window 7 but can not activate because geographically limited.
  I bought at the Malaysia (restriction of activation is Distribution and activation required to be held in South East Asia except Singapore), my country is myanmar's Southeast Asia too, why occur geographically restricted. My country myanmar is Southeast Asia. Please solve this problem fix for activation.
  my email address is * address email is removed from the privacy *.
  E-mail address is removed from the privacy *.
  Best regards
  TIN TUN AUNG, Myanmar
  Phone 959 5137238 {}

  Original title: code 0xC004C017

  Try to use the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can NOT CONNECT to PC RUNNING WINDOWS 8 - only "your PC is offline.". Please sign in with the last password used on this computer. »

  I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?

  But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error.  I had this problem as well and he needs to be addressed.  Whenever you walk away a network before installation on your PC/laptop, you will have this problem.  Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account.  Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again.  It should work.

• Windows 8 do not sleep when I close the lid

  I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

  What can I do else?

  Edit:

  I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

  is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP