Computer connection on another printer on cisco valet router

Similar Questions

• Laptop computer connecting to the printer connected to the Airport Extreme

  I will soon buy a MacBook Pro laptop and I'm interested in the way in which I connect to the printer connected to my iMac through my Airport Extreme.

  Unfortunately, you don't specify how the printer is connected to the iMac, but let's guess that's via USB.

  On your iMac...

  Open the preferences system (gear on the dock icon)

  Open the share

  Enter a check mark in the box next to printer sharing

  Close the window

  Now, do the same for the MacBook Pro

  Then, open Preferences system again on the MacBook Pro

  Click on printers and Scanners

  Click the + to add the printer to the MacBook Pro

• Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

  Hello

  I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

  I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

  Printing from laptop (connected wireless to the router) works perfectly.

  Thank you in advance for your answer, I'm really lost on this one.

  Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

  I'll try to manually add again in this way:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• printer and computer connected but not printing

  connected my kodak c310 printer to my computer wireless but does not print

  Hi Ken,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that the computer is not able to print from a wireless printer.

  Let me go ahead and help you resolve the issue.

  To help you better, please answer these questions:

  1. what happens when you try to print?

  2. you receive an error message?

  3 have you tried to print a test page?

  4. to which application you want to print?

  I suggest you follow the provided methods to solve the problem of the printer.

  Method 1: Run the Microsoft Fixit.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3: Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Due to operating system Windows or anything related to the printer, feel free to get back to us.

• Touchsmart computer connection to another monitor

  Hi, I looked at the forum in other places and I've seen an adapter that can work with other my monitor, but I'm not too sure. The HP USB graphic adapter connects to a DVI / VGA? And if it is could I then connect my other monitors VGA cable, (the only entrance/exit) with pins on the connector DVI / VGA?

  Please help me if you can. Thank you

  This is the profile for the HP USB graphic adapter (model # NL571AA). According to the specifications, the adapter kit consists of HP USB graphics card, a USB cable and a DVI - I to VGA. Plug the USB cable into the computer and the USB graphic card. If you are using a cable and a VGA monitor, plug the DVI - I to VGA in the USB graphics adapter. Then plug your time your monitor VGA audio and USB DVI - I to VGA graphics card installed.

  You can do the same thing with any other adapter USB / VGA on the market, including EVGA more + UV19 or the EVGA more + UV39

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Replaced fried DLink router with Cisco Valet wireless, internet connection OK but can not print on Canon MX860 printer?

  As in the title, power storm seems to have fried the step-down transformer and router DLink.  Replaced this morning and only took a few minutes to operate wireless router Cisco Valet for wire hard PC and wireless laptops.

  However, it seems that my Canon MX860 printer is not found by the network.  It can be located by control panel of Windows Vista and I have uninstalled and reinstalled twice.  But when I try to print I get the error message "printer not found."

  Help.

  Hello

  If this is a network printer ready to reconfigure the printer to match the new router.

  If it resets in a different IP, you need to set the printer to the computer for the game too (see the manual of the printer).

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• I need to connect to a printer in another room. How do I do that?

  I want to connect to the printer in another room in the House. I have the printer installed on my computer, but cannot print from it. This computer is windows xp and the other computer, it is connected to a windows vista. How can I connect to the computer?

  You must go to the printers properties (on the computer that its connected to), and then share it. Then add the printer on the XP PC drivers (if it's the PC that you want to print from). Printers / add a printer / select network printer. Add inf file of the driver here. You may need to extract the file to the printer to get the INF for her

  Of course, these 2 PC must be connected by wireless or ethernet cable

  But if the printer does not work (on the computer its connected to), you can connect to one you want to print from. Then install the drivers for it (install the drivers first, do not turn on the printer or connect), until it says connect

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• How to use wifi when connected to another computer?

  I am currently in a situation where I need screen sharing another mac via ethernet with my thunderbolt, while the Wifi adapter. I have a 2014 the computer I want to see is a new Mac Mini and Macbook Pro screen. When we are connected by ethernet, none of my wifi signal works, even if I am logged in. My computer is looking for internet connection coming from the mac mini, but that is not connected to the internet. As soon as I unplug my shot of lightning/Ethernet, then my wifi starts immediately to the top. In any case to be connected to my wifi, as well as the other computer by ethernet at the same time? Thank you

  Steve

  Your description is disconcerting.

  Do not run cables on the carpet between the computers. Connect all devices to your router or switches that connect to your router, or via Wi - Fi to your router.

  You have a SINGLE network. Some devices can be connected by Ethernet and others by Wi - Fi, but it's the same network.  There is no need to have all devices to use the same media. Ethernet is the fastest connection you can do, so if you have an Ethernet connection, Wi - Fi can be "".

  As long as each device can get on the Internet at the same time without rewiring, you can also do a computer connection to computer whenever you want.

• Help! Computer connection issues / printer after Windows 7 upgrade

  I HOPE THAT SOMEONE HERE CAN HELP ME!  I am frustrated beyond belief.

  I have upgraded from Vista to Windows 7.  My computer is a hp dv5 pc, 64-bit.  My wireless printer is a hp OfficeJet J4680c.  Before the upgrade, wireless printing was perfect.

  Since the upgrade, when I try to print, two things will happen:

  (1) when I try to print, there is a mistake that the document cannot print.

  OR

  (2) when I try to print, the printer icon appears that the document will print, but nothing happens.  When I right click and open the Active printer, it shows that it is "printing", however the number of pages displayed is n/a.  After 2-3 minutes, the document simply disappears from the print screen, as if it printed.

  I went through the troubleshooting steps on my hp PC help & support, I have read the forums for hours and tried various fixes, I went through the center of solutions hp printer troubleshooting steps...

  The final diagnosis is that the computer is unable to 'find' the printer. Here is some additional information:

  I was able to print occasionally during the troubleshooting process (see below for more information)

  All the drivers are up to date.

  Computer and the printer are connected to the same network wireless in my house.

  Whenever I have manually print the "HP Network Configuration Page," it shows that the printer is "ready".

  Windows defender is OFF

  The Windows Firewall is DISABLED

  3rd party firewall Vipre has been RUNNING, with the same results to be

  What follows can offer anyone a clue as to the problem:

  Four times during this process of troubleshooting, I completely uninstalled printer and then reinstalled using the updated driver and instructions on the hp Web site.

  Whenever during the installation process, the computer does not find the printer, and I have to manually enter the IP address of the printer.  Then, the computer does not find the printer, and the installation continues.  Until he comes to the end, when it is completed at 98%. Then, I get a message:

  "Rediscovery printer detected problems. Maybe your PC is not able to track changes in the online status of your printer. If you use firewall software, make sure the port UDP 427 is unblocked from your printer at 192.168.0.5 for your PC. To resolve the problem, try to feed your printer market. »

  (of course checked summer port and the printer power is turned and the...) I followed all steps completely).

  Then, I give myself a choice or continue installing the software without connecting to the printer, or to continue with the installation of the printer.

  When I tried the first choice, install the software without the printer, then I went back later to install the printer. During the installation of the printer, I'm at the same point at 98%, with the same message.

  I also tried to install the printer in any case and it ends up all right, and then the printer worked for a day or two. But after a day or two, I'll be once more cannot print, and I will either receive the error message, otherwise it is not only print (SEE the BEGINNING OF THIS POST).

  I've tried everything I know to do and no message forum or troubleshooting is now offering me any new information.

  Can you help me???

  Have you tried the 'updates' on this page?  There is a couple who look like they would help.

• computer connection laptop HP Photosmart 7760 printer

  I just bought a new computer - hp pavilion and I cannot connect to my printer - hp photosmart7760. My printer is too old?

  Moved from feedback

  Original title: laptop computer connection with printer

  Hi Benny,.

  -What operating system is installed on the computer?

  You can read these articles and check if that helps.

  Installation of HP printer: http://www8.hp.com/us/en/support-topics/printerinstallation.html

  If you have installed Windows 7, then you can view this tutorial because it is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• Computer does not connect to the printer epson stylus CX3810.

  Original title: computer will connect to the printer because the loader program does not list the stylus CX3810 epson and I can't find a few good sub. The printer worked ok before two days ago.

  Can not recharge my Epson stylus CX3810 because it is not listed in the list of available printers. It worked fine yesterday.

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall printer

  See the following article:

  Install a printer

  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

  Method 2: Because it worked yesterday, you can restore the computer to a date where it worked fine before.

  Reference:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions