printer and computer connected but not printing

Similar Questions

• The text is visible on the computer screen, but NOT print

  The text is visible on the computer screen, but NOT print

  When I print the document (the header and the footer together can print).

  My printer is Lexmark X 5470.

  Please tell me how to solve this problem.

  Thank you

  Longpo

  Hi Longpo,

  1. what happens when you try to print?

  2. you receive an error message/code?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. Refer to the help article and check if that helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• E4200 Mac connects but not PC after crash

  We had a power failure.  Connection Wi - Fi disturbed and has not corrected itself as in the past.

  A MAC and android os phone will connect but not PC with different operating systems.

  Wired computers will connect and go on the internet but not when try wireless on windows PC.

  I have a comcast modem and a router wireless e4200.

  Tried the re-engining of the modem and the router.

  Tried to unplug Cisco on computers and then reconnect to wireless connection.

  Sometimes laptops will discover the excellent show and Cisco of the signal power but does not connect.

  Wireless is enabled on laptop computers.

  Do not know what has changed this causes for the victory of the PC only.  (IP? etc?)

  Any help is appreciated.

  Thank you.

  Thank you for the answers.

  I did a factory reset within the connection on the router.

  After resetting my settings it works fine.

  No idea what scattered settings.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• I can't enter in gmail. Error "page is not redirecting properly" is displayed. I can access gmail on my phone and with IE, but not firefox.

  I tried to clear the cache and delete cookies from gmail, but none worked. I can access gmail from my phone and through IE but not firefox. I also use the gmail gadget to my igoogle page and it does not work either.

  Tried all that precedes, and nothing has worked. I don't think it would be though, it is a new installation of windows 7 with very little installed. I wasn't expecting to find any virus/malware. The only thing found was an adware but removing those does not solve the problem.

  Edit: Uninstall and reinstall firefox did not work either.
  Edit2: I initially deleted all cookies associated with google and it does not work. I went back and remove all cookies, and it works now. Sorry I don't know what cookie was the cause of the problem.

• I can't get Firefox to play the horizons of music on the pages in browsers, it works in IE and other browsers but not firefox, HTML or Java script must also use so that they work?

  I'm having a problem with firefox, play background music on some sites, it works with IE and other browsers, but not with fire fox, what html script or java I must add to the pages so that they play music?

  I am developing my pages front page and I know the music only works on IE, so if someone can tell me how to fix this because it is important that I use fire fox as my main browser.

  Thank you in advance

  If a site uses BGSOUND so this will only work in Internet Explorer.

  BGSOUND is not compatible with other browsers like Firefox.

  • http://KB.mozillazine.org/Background_music_does_not_play

• I have Photoshop CS6.  I recently bought a Nikon D750.  I can't understand how to upgrade my version to read raw files.  I'm not computer illiterate, but not a COMPUTER genius either.  I have a pc with windows 7.

  I have Photoshop CS6.  I recently bought a Nikon D750.  I can't understand how to upgrade my version to read raw files.  I'm not computer illiterate, but not a COMPUTER genius either.  I have a pc with windows 7.

  Have you updated Camera Raw to 8.7?

  Camera Raw plugin | Supported devices

  Plugin Raw camera setup

• How to say the script colse all files and save them, but not untitle docs

  Hello world

  I want colse open files and save them, but not the files that have never been saved.

  Try this script, but I ran after, all files are not saved.

  docs var = app.documents.
  for (var i = docs.length - 1; i > = 0; i--) {}
  if(App.activeDocument.Saved == false) {}
  docs [i]. Close (SaveOptions.no);
  }
  Another yew (docs [i] m:System.NET.Sockets.Socket.close (SaveOptions.YES));
  }

  can someone tell me what is the problem with the script?

  Thank you

  Respect of

  Teetan

  
  

  var docs = app.documents;
  for (var i = docs.length-1; i >= 0; i--) {
      if (docs[i].saved == false) {
          docs[i].close(SaveOptions.NO);
      }
      else {
          docs[i].close(SaveOptions.YES);
      }
  }
  

• connected but not connected

  Hello
  on 11g on HP UNIX.
  
  Can not understand: connected but not connected:

  sqlplus sys@+ASM as sysdba
  
  Enter password:
  ERROR:
  ORA-12154: TNS : 
  Enter user-name: sys as sysdba
  Enter password:
  Connected.
  SQL> select * from v$instance;
  select * from v$instance
  *
  ERROR at line 1:
  ORA-01012: not logged on

  Any idea?
  Thank you.

  sqlplus sys@+ASM as sysdba
  ORA-12154: TNS:
  Enter the user name: sys as sysdba

  SQL > select * from v$ instance;
  Select * from v$ instance
  *
  ERROR on line 1:
  ORA-01012: not connected

  You connect to the instance by TNS connect descriptot ASM?
  Which alert log file shows?

  tnsping + ASM

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.

• Capsule time connected but not in finder

  Hi all

  I have a timecapsule (2014) connected to an iMac (2011) latest OS 10.11.2 El captain and others (macbook, iPad).

  The capsule is in Bridgemodus. The router of the provider is the DHCP server and is connected through a UTP cable to the TC.

  Since we replaced the router the TC external drive is not available in the Finder more. (not even in FE fileExplorer on iPad air2).

  The WIFI is fine and working okee in bridgemodus, 2.4 and 5 Ghz is ok.

  Reset the TC factory and redo the installation... No files are lost in doing so.

  Whenever you change network routers, you will need to do this.

  The simple first step however is a power down of the whole network and all customers.

  Restart in the right order...

  Modem... Wait 2 minutes.

  Router... Wait 2 minutes (it may be the same as the modem)

  TC... Wait 2 min

  Clients.

  If it fails, proceed like this.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

• I am able to receive streams Netflix and Amazon Prime but not my shared network libraries.

  i AM ABLE to RECEIVE NETFLIX AND AMAZON PRIME FLOW BUT NOT MY NET WORK LIBRARIES

  original title: HOW CAN I GET MY WIRELESS BLUERAY PLAYER to CONNECT to MY HOME GROUP NETWORK for ACCESS to MY MEDIA? HIM DRIVE "SEES" MY COMPUTERS BUT DOES NOT CONNECT TO THEM.

  Hi KEN138,

  ·         What operating system is installed on your computer?

  ·         What exactly happens when you try to connect to the home group? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to return the item and check.

  Stream your media to devices and computers using Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player

  You can also see the article for more information on the problems of connection Wi - Fi and wireless.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please you with more information on the issue so that we can you extra.

• Router WRT160N - Macbook Pro can connect but not Internet

  For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

  My mac has always been able to connect to other wireless routers. My router is the latest firmware.

  I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

  If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

  In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Adjust the settings on your router wireless-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  If you have a second see computer/laptop wireless if it connects to your wireless network of...

• WRT54G2 - laptop connected but not surf the web

  Hello everyone, please someone help me... I bought a WRT54G2 and configured correctly... my desktop computer works fine, but my laptop is a problem... I connect to the router via WiFi from via a cable, it connects to the routher and I see it connected, but I don't get internet signal... do I have to open anything in the router?

  Thank you.

  Well well, for some, strange / funny / slash reason I won't be able to understand, I followed all your instructions with no luck... but one night I fell asleep unplug the router of the AC and when I plugged the next morning, all the router settings were reset, as if I flashed. So now I can connect and surf the web. Is this problem comes back, I'll post another message.

  Thank you!!!