Replaced fried DLink router with Cisco Valet wireless, internet connection OK but can not print on Canon MX860 printer?

Similar Questions

• Lose the wireless internet connection when it is not active

  Hello
  I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.

  Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.

  The only cure to get online is to update the connection.

  What I'm doing wrong here?

  Thanks in advance... Jens

  Hello Jens

  Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.

  Good bye

• ENVY 15-j037tx Notebook PC: Wireless poster full bar but can not conect

  Hello

  Recently, I got my recovery USB backup flash machine... the system recovered even if windows was not active... He started to be updated... after a few updates (maybe intel centrino 2230... I think so) it restarts and after reboot wireless could not be connected. Although the available networks are displayed, and mine with full bars but when I enter the password it can not connect. Help, please...

  Hi @lazirus ,

  Thank you for your inquiry.

  I understand that you have made a recovery in the factory and you were able to connect to your wireless network until an update has been installed. Now, your network is displayed, but it does not connect using your password.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8).

  If none of the listed steps have resolved the problems try reinstalling the drivers of original network in the Recovery Manager that he was working at the end of the recovery.

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 8)

  Good luck!

• How to replace the missing wireless internet connection icon in the network connections?

  How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

  Hello

  The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
  http://support.Microsoft.com/kb/825826

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Went from "Windows Media" to "Windows XP SP3". Now, I get "Error Message 871122" trying to get a wireless Internet connection.

  Here are the facts:

  1. to have access to the internet with a direct line to router Ethernet ONLY, but no wireless connection.
  2. verified Harware for "Intel (r) PRO/Wireless 2915ABG Net" - WORKS FINE.
  3 drivers for the cards above, have most recent downloads - WORKS FINE.
  4 activated the 'USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS' button on the tab 'network connections'.

  In fact... impossible to find the above until that earlier. What happened immediately, is that I no longer get the "ERROR MESSAGE to SEE the ARTICLE ID: 871122" message. And instead, I could FIND my network. He finally has shown Up! However...

  Now, I clicked on my network and click 'CONNECT' and his request now a WEP key to be entered twice.

  So, I just need to get this 'key' to my Service provider and punch in, and it should work? Well, I'll try tomorrow.

  Thank you.

  So I read the ID: 871122 Microsoft Article. But I can't always have to figure if I need some sort of 'Internet '.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Photosmart premium all in a defiler of c309a wireless radio is on, but will not recognize network

  Using a laptop computer Dell windows 7 with my printer and it works well. All of a sudden, my wireless to the printer indicator is on, but I can not get the printer to recognize the network at all, and obviously can not print from my wireless laptop. Works very well by USB.  I ran all the diagnostic tools on the site of hp, nothing helps... The printer is only 18 months - old do not throw out just for that! Any ideas how to solve this problem? I have reset the router, hard to reset the printer and followed all the steps of the Diagnostics. I'm puzzled!

  I feel like a real dope. But this correction is so simple and cost nothing. You need not map the c309A wireless. What I did, is running a network cable to the back of the printer to my router (one of taking four behind) which automatically added the printer to my home network. So all I had to do after is go to the "Add a printer" Wizard on my computer laptop windows 7, let the wizard find the printer, which she did, and it works very well, from anywhere in the House. I don't know why I didn't think this earlier.  I'm not an expert, just do a lot of trial and error and I usually understand. I woke up in the middle of the night and thought of this. Feel really stupid! But what surprises me, why the guy from HP offers this? What is with that?  (by the way, I found the part, but they wanted bucks 48.00 plus 12 for shipping.) What a scam! That's not your job, it's Mr. HP guy?

  WOOHOO!

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got the error 0x8000FFFF: catastrophic error on windows XP pack 3 service. How can I fix this? I can do everything, but can not get the computer to detect wireless networks?

  I used disc cleanup and bang this error came. I don't know how or why. I can't use internet somehow. Normally, I connect to the internet with our home wi - fi connection. But my computer now sees not all networks wireless at all. I made sure the wireless switch is on and my son checked all settings network... still nothing. I am quite at a loss to solve this problem and do not have money to take right now to a pro. Help please?

  I also got the problem devices following system infor...

  Atheros AR5007EGwireless AVG mini port network adapter driver pnpdevice I\D ROOT/GR_AVGFWMP\0002 error code by using the V & D charger

  Atheros AR81 32PCI-E FastEthernet Controller AVG miniport driver ROOT\GR_AVGWMP | ooo1 failure using the V & D charger

  iecont.dll missing file

  iecontic.dll missing file

  ieuinit.inf not available

  Proxy disabled

  Disabled Access Manager

  Thanks a lot if you can help. The computer is a netbook with a screen 10 inch aspire. It's an older version, but is running windows xp with service pack 3, I use a laptop plus old to communicate with you and will continue to do so, to read your tips, thank you again.

  E-mail address is removed from the privacy *.

  Hello Sharon,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

  I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

  I am running windows vista Home premium. Computer is Hp Pavilion dv6
  original title: try to set up an ad-hoc connection

  Hello

  Follow the suggestions from the link and check if it helps:

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Reference: Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.