Computer Dell laptop does not start

Similar Questions

• Computer Dell laptop does not start with error: 0xc000021a in windows 8 pro with media center...

  I have dell laptop computer (windows 8 pro with little Media Center x 64) ##genune, not cracked or pirated... #.

  It worked fine until the evening yesteday and I was playing Holy 4th place after closing, I noticed that the battery is about to happen at 10% so I did it just to sleep for awhile cauz I haven't had none running around the House... shortly after came current I just picked up my cell phone, but suddenly I saw an error message indicating that "your laptop computer encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100 % Complete) If you want to know more, you can search online for this error: 0xc000021a "and there is no changing the screen as I waited for 3 hours now... I never had an error like this... pls hlp me...

  Hello

  Are which country you located?

  Dell has wide global support. I suggest you to select the country where you are and check if you can get the recovery DVDs.
  http://www.Dell.com/support/contents/us/en/19/category/contact-information

• My Dell laptop does not start

  I have my older Dell laptop which stop the other day and I thought that the battery had just missed completely, plugged in left to load and when I got home it turns any. New laptop for my son has had this problem and tech support had me press and repeatly F key and I think that either press and hold the power button or press the key and let go? I wanted to try this with my laptop but can not remember what F key or the thing with the power button. Help please, hoping that he disappeared were ongoing work and family top photos.

  Thank you

  Hi Appieloosa,

  I suggest you follow the steps below, first to release any static power in the laptop which may cause this problem:

  1. remove the battery and the laptop AC adapter.
  2. press and hold the Power button for 20 seconds and release.
  3 reconnect the battery, AC adapter, and then press the power button.
  4. the laptop must turn if static is the cause.

  You can press the "Fn" key and the "Power" button to run the hardware diagnostics if the laptop does not power on after following the steps above.

  Please let me know your results.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Computer Dell laptop does not light

  I have a Dell inspiron 15, that does not illuminate. I tried to take out the battery and pressing the power for 30 seconds, did not help. Called customer service, they said maybe the motherboard, but they don't have any that match my laptop and the warranty is expired.

  Any other suggestions? Thank you

  Hi VICIOUSVIC,

  Please write to us.

  Please private message us the serial number of the system as well as your login email.

  (Note: Please do not mention the id of service tag or by e-mail on the public forum because it contains your personal information).

  Kind regards
  DELL-Loïc M
  Professional community and social media
  #IWork4Dell

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Computer Toshiba laptop does not start

  Have had some problems malware. Thought I had deleted them, including Thinkpoint. Restarted. Got the original F2 and F12 screen then just empty. Will not go further.

  Can anyone help please.

  Hi jagman49,

  1. try to start the computer in safe mode and check if you are able to boot to the desktop.

  See the link below to start in safe mode: a description of the options to start in Windows XP Mode:http://support.microsoft.com/kb/315222

  2, if you are unable to boot into safe mode, then try the steps by Mike - support engineer Microsoft Support, moderator of the link below: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Envy of HP dv7t quad laptop: laptop does not start

  My laptop does not start I get the message.

  Computer does not start. "A required device is not connected or is not accessible.

  Error code: 0xc0000185

  Using diagnostic tools, I get these results:

  Quick check memory: failed

  Hard drive short DST CONTROL: WARNING

  I am "spent" for the rest of the diagnostic checks.

  Thank you

  khosrowbp

  Your hard drive is failing, fast (these things last forever). You need to replace as soon as POSSIBLE. If you have important data on what cannot be replaced I suggest you plug it into another computer as an external drive and pulling all the data you need it off.

  If you do not have the possibility to connect the drive directly on another PC, you can download a live Linux CD/USB.

  Step 1: Acquire a blank CD or USB. If you use a USB port, format it in FAT32.

  Step 2: Insert your chosen in your PC Backup media.

  Step 3: Download Unetbootin.

  Step 4: Select a distribution in the drop-down list. Just about anything will work, but for your application, I would recommend "Puppy Linux".

  Step 5: Select your media.

  Step 6: Once Unetbootin is complete, insert your media in the PC is installed on the corrupted hard drive.

  Step 7: Boot puppy. (You may need to select your Flash DRIVE or a CD in your BIOS)

  Step 8: The use of the included file manager, mount the hard drive and browse for the files you need. You can then save these on another DRIVE or a CD drive, or the internet.

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Laptop does not start upward, Windows error recovery

  Hello, my laptop has blocked start correctly.

  It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

  I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

  I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

  Thank you, Josh

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput