Computer desktop Dell, XP Pro, P4, 2 minutes to connect to IE8 hard wired through router N

.. .do a relocation back to factory shipped. Reinstalled all Windows updates... now 65 seconds to connect. Belkin and earthlink say ' nothing wrong with «our equipment»» Each connection is established, opening a new page of IE8 time is 10 seconds. Anyone has any ideas... Thank you

Hi stur2009,

Thanks for posting. Please, download and install the latest drivers from your manufacturer's network card.

Let us know if this solves your problem.
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • OfficeJet Pro 8000 Wireless does not connect to my new Airport Extreme router

    I've owned my Officejet 8000 Wireless printer for about a year and had no problems with it.  However, my old wireless router wasn't fully compatible Mac so I couldn't fix it with a password.  I now need a secure network, so I bought an Apple Airport Extreme router in December.

    Last night, I installed the router and it works fine on my iMac, my laptop and my iPhone.

    However, tonight, I'm trying to implement Officejet Pro 8000 with no luck.  I searched the posts here for 3 hours and am not finding the help I need.  Based on the other posts, I read, I describe my situation below.

    I am trying to set up the printer in my iMac Intel with Mac OS 10.6.4

    I'm trying to set up the printer with the installation wizard HP I just install the printer software.

    On the first screen of the wizard, it tells me that my device is not configured (I agree)

    Then I ask him to set up a wireless network.

    When I get to the network selection page, both my network AND my network of comments (that I let my neighbor use) are on the list with the full signal strength.

    When I click on my network and then continue, the HP installation wizard hangs and I have to stop, he.

    When I click on my guest and then network continue, I get the message that my network is not within reach.  (FYI, the printer is 10 feet from the router).

    I tried to power on/off the printer, the router and the computer at all different stages of the process with no luck.

    For my Airport:

    My radio is set to the most compatible choice

    MAC access control is not enabled

    Everything is WPA2 security

    'Use wide channels' and "Create a closed network" is unchecked

    The channel is set to 11

    I'm happy to try the "Add client in the network" thing I've seen on other posts, but I don't think that I have a front panel of the printer where I can start the "WPS" (don't know what it is) process.   If I do, it is not obvious and not in the HP manual.

    My ISP is Comcast (cable internet).

    I'd really, really grateful for the help!  Please let me know what I forgot to include information, and I will be happy to provide it.

    Thank you!

    OK to reset the printing system again, he may be blocked.

  • How to transfer pictures from the desktop Dell to MacBook Pro Photos

    How to transfer pictures from the desktop Dell to MacBook Pro Photos

    Writing an effective question of communities of Apple Support

    On the local network.

    External hard drive.

    The thumb drive.

    Cloud storage.

    Messaging.

    etc.

  • How can I reset my desktop computer pc dell to factory settings to restore my sounds & play dvd & cd?

    How can I reset my desktop computer pc dell to factory settings to restore my sounds & play dvd & cd?

    The manufacturer was required to provide a way to reinstall Windows.

    If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

    Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

    Restore the computer provided you plant with installation disks:

    Dell - creation of your system with Dell DataSafe Local Backup 2.0 recovery disks:

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_62A668E1C399857AE040AE0AB8E12942&isLegacy=true>

    Dell - application installation disc:

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form>

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&l=en&s=Gen

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/4-day-old-lap-top-just-got-error-code-0x80070424/70f2ed84-78a9-4D23-8BC9-be2bb43c2191

    UTC/GMT is 08:10 on Tuesday 5 June 2012

  • My desktop Dell - Vista - computer does not, the monitor says no entry and have to wake up computer

    I have a desktop Dell Vista computer.  A few days earlier, when I pressed the power button to turn it on, nothing happened.  When I turned on the monitor, he says that he came into power saving mode.  When I checked the monitor once again, he said that there is no entry for the computer and press any key of the keyboard or mouse to wake up.

    The computer is plugged in and the green light in the back is on.  I don't remember putting the computer to sleep.  I thought I made a stop for a few days in advance.  Press and hold the power button on the computer does not start it or turn it off.  There is no sound (such as a fan).  I unplugged the computer briefly a few times, and then I finally unplugged overnight and is plugged in.  Light lights up in the back, but is not the "num lock" key on the keyboard and the light under the mouse does not light.

    I checked a few suggestions on this site, but they all require that the computer be on and you enter in this form or the screen.  Is the computer dead?

    Thanks in advance.

    Hello

    There seems to be a problem with the hardware, I suggest you to contact Dell support on this subject.

    http://support.Dell.com/

  • I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    Hi edwards39572619 ,

    Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

    Let me know how it goes.

    Kind regards

    Christian

  • I'm playing Iheart radio on my desktop dell 8300 and it won't play.

    Original title: iheart radio will not play

    Hello, I'm playing Iheart radio on my desktop dell 8300 and it won't play. Other music on the games on my computer, my heart time on my laptop. I tried everything and can not make it work.  Another line stations flow and play without problem. Any ideas?

    Hello

    1. what player you use to play iheart radio?

    2. you play it from a web browser?

    3. If it works well before?

    4 did you change on your computer before the show?

    Temporarily disable the security software and check if you can play the radio station

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    For more information, see the link below:

    http://www.iheartradio.com/cc-common/radio_app/faqbb.html

  • Meeting place for Dell 8 Pro - load / start up

    Hello

    I've read two or three other messages indicating 'place of Dell 8 pro does not start' & the issue by holding button twice.

    I seem to have a different problem here.

    My dell place 8 pro starts not to bright screen, no dell logo, not seeing (orange/white).

    If I put it to charge (using the dell charger), white light is on & then after 5/10 minutes it turns off & then there is no light regardless of how long to load I put it on charging.

    Pls advice, are there centres of dell authorized service in/all about delhi, India?

    Waiting for launch...

    MM

    Hello

    I've read two or three other messages indicating 'place of Dell 8 pro does not start' & the issue by holding button twice.

    I seem to have a different problem here.

    My dell place 8 pro starts not to bright screen, no dell logo, not seeing (orange/white).

    If I put it to charge (using the dell charger), white light is on & then after 5/10 minutes it turns off & then there is no light regardless of how long to load I put it on charging.

    Pls advice, are there centres of dell authorized service in/all about delhi, India?

    Waiting for launch...

    MM

    Hello

    As there is no light from the screen or the Dell Logo at startup, which suggests a hardware problem

    I suggest you contact the Dell Support in India for assistance as to where their Service centers are located,

    http://www.Dell.com/support/contents/in/en/indhs1/article/contact-information/customer-support/customer-support-phone-numbers

    See you soon.

  • My desktop dell, keyboard and hard drive was stolen by a member of the family

    My desktop dell, keyboard and hard drive was stolen by a member of the family, but I don't know where they live. I have the model # and delivered all the information that came with the computer. Can I know where it is through the ISP? SOMEONE PLEASE HELP!

    Hello!  Dell doesn't have the ability to track your computer, but you can fill a form of stolen property which will report your system in Dell computers in case your family member trying to file a claim of warranty etc.  en.Community.Dell.com/.../7424.Stolen-Assets-Report-a-Stolen-System

  • Cannot install Windows updates (has no status) on the computer desktop and laptop

    Desktop               (Purchase date: 13/07/2010)

    Model: Pavilion p6402f or 6402f

    Product: BK275AA #ABL

    Serial No.: {removed privacy}

    OS: Windows 7 Home Premium Service Pack 1 64-bit

    Product ID: {removed privacy}

    Portable               (Purchase date: 14/07/2011)

    Model: Pavilion g6 Notebook PC

    Product: QD317UA #ABC

    Serial No.: {removed privacy}

    OS: Windows 7 Home Premium Service Pack 164-bit

    Product ID: {removed privacy}

    Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

    No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

    Method of connection: wireless

    Technical expertise: intermediate level

    Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

    Hello amib004,

    As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

  • Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

    Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

    roches28,

    According to the specifications , it is an IEEE 1394 (aka Firewire 400) 6wire.

  • HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

    Hi all

    I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

    I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

    "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

    I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

    It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

    (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

    If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

    Hello @Plz_Help.

    Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

    The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

    Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

    If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

    Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

    A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

    Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

  • I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

    I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

    Hello

    And much more: (XP mode requires professional, Ultimate or Enterprise).

    Get all the benefits of Windows 7 and continue to take advantage of your investments and more
    business and productivity programs that require a PC running Windows XP.

    Note: Windows XP Mode requires a download.
    http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

    Windows XP mode
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

    Windows XP Mode is supported through Technet

    TechNet - Forums - Windows 7 virtualization
    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • What is a computer screen dell inspiron 1526 laptop?

    What is a computer screen dell inspiron 1526 laptop?

    15.4 inch: -.

    http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us&l=en&CS=19&SKU=X949H&baynote_bnrank=0&baynote_irrank=0& ~ CK = baynoteSearch

  • Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

    Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

    The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

    The system deletes some files and at the end of shows, complete audit files and then show

    CHLDSK is verifying indexes (stage 2 of 3)...

    Once again, it shows the following:

    Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

    Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

    Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

    Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

    Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

    Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

    Finished the index checking

    CHKDSK is checking security descriptors (stage 3 of 3)...

    100%

    CHKDSK checks usn Journal...

    Windows control disc is finished.

    After all checks, Windows proceed to start as usual.

    I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

    Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

    Please advice me on the following points:

    1 is this normal as he started only happening in recent weeks?

    2. How can clean the Volume in order to show "Volume is clean instead of sale"

    I look forward to hear from you.

    Thank you

    Hi, Dr.,

    Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

    Autochk runs if the volume is marked as modified.

    If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

    See Chkdsk for all the necessary explanations:

    http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

    Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

Maybe you are looking for