Computer does not detect some files on my Sansa 2 GB Clip

Similar Questions

• computer does not detect not active LightScribe dvd writer drive.

  Bought in 2009-trusty HP Photosmart C8180 printer all-in-one has a permitted lightscribe dvd burner drive. Worked very well with 32-bit Xp computer.

  Now I have a new computer running Windows 7 64 bit, so had to download software like older software would not work. Printer now works fine again, even wireless. Yesterday I tried to use the dvd player, but my new computer does not detect the dvd on the same printer drive. I love this printer and nothing on the market has the following features for a replacement is not what I want.   Someone at - it suggestions. Cheers from Tasmania

  Tried the software. Its the same thing as what I downloaded when my own outdated software did not work.  I tried to add a USB in addition to the wi - fi connection. The computer then saw the drive. This means that it is the only way it will work or is there some software/driver tweeking or more I can / add to make ALL of the wi - fi function

• Card reader HP Pavilion dv6 does not detect some SDHC cards

  Hp Pavilion dv6-6104so laptop

  Windows 7-64 bit

  The laptop card reader does not detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90 and BIOS, but it does not yet recognize some of our cards.

  We have six three SanDisk SDHC cards (4, 32 and 32 GB), two Kingston (8 and 8 GB) and an integral (4 GB). The card reader recognizes four of them (4 to 32 GB SanDisk cards and one of the two cards Kingston). What is strange and you may have already noticed is that the card reader recognizes only one of two cards with the same brand and quality!

  On the two cards that don't recognize in our specifications, they work properly in their corresponding cameras and are detected without problem by another reader of cards to laptop of HP Pavilion dv6-3138so, as well as by two netbooks from our two different brands.

  When we connect the camera (a Canon and Sony, both point) to the computer via a cable USB 2.0, the laptop detects the cameras and through them, we can access the cards.

  We bought the laptop less than two weeks in Helsinki, Finland.

  Thank you in advance for your help!

  Hey everybody,

  Use of a high capacity card in a standard card reader location causes this problem. Im going to guess that the cards you ar having problems with are not standard SD cards and SDHC cards. As Naoto said, using a camera as a card reader you workaround this. You can also look in the adapters of SDHC card reader. Here is a good article on SDHC cards: http://goo.gl/lj5Fq

  I hope this helps!
  Sean

• Computer does not detect CD players

  I am running Windows XP Professional SP3.

  While I was trying to solve another problem, I made the mistake to delete CDRALW2K. My computer SYS. Now my computer does not detect my CD players in the analysis of FDI, and that they are not listed anywhere in my BONES. Is it possible to recover?

  Hello

  You can run the fix it from the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  See also: "CD recording software will be Cause Windows to become unstable" error message when you start Windows XP: http://support.microsoft.com/kb/315345

• Photo Gallery does not open some files (pictures) that he used. He said: it is not "supported."

  Photo Gallery does not open some files that it used.  He said that its not "supported"?  In addition, I can't open some of the files that are in that I think an older version of word.  How can I fix these problems?  There is no window that opens for updates when opening Photo Gallery.

  Well, you don't say what files it used to open then try this. Control Panel, programs, by default, set your default progaams, Windows Photo Gallery, set this program as default.

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576

• HF R600. For some reason, my computer does not detect it.

  So, I don't know why, but my computer, windows 8 (I know..) does not detect my camera, the HF R600. It does not appear in the list of connected devices, the transfer utility said that it is not connected, I'm not sure what to do. Also, I felt that I could ask now as well. IM planning to use with LiteCam game software with the camera providing the embedded video, you get to know if a compatible device for it?

  Try this, with connected usb camera, click the play button under the power button on the camera body?

• My computer does not detect any of my Bluetooth devices

  Help, please!

  Original title: I HAVE 2 BLUETOOTH DIVECES BUT MY com DO NOT WANT TOO ACKNOWLEDGE THAT? What is wrong = (((??? s'il vous plaît m'aider =??)))

  Hello

  Your computer supports BlueTooth? Check with the system manufacturer's support, their documentation online
  and drivers and ask in their forums (if any). If may 3rd party module BlueTooth adapters supported wouldn't
  be necessary.

  =====================================

  If supported these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Add a BlueTooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
  and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
  device coming to your area and when the unit comes out of your area, a new journal line is added with
  the following information: device name, time of the event, address, Type of event ("peripheral
  Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
  View you can also specify a description for each device (according to its MAC address)
  that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  ---------------------------------------------------------------------

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• BlackBerry Smartphones computer does not detect Blackberry

  After you have connected to the computer via USB, there is no evidence in my computer that the Blackberry is not connected even if Mass storage mode is turned on. My computer does not display the device or media card. Desktop manager detects but Media Sync does not work.

  Here, try this. I had the same problem and it worked for me. Got this from another site:

  Mass storage solution... Finally working...

• After installation, my computer does not detect my Laserjet 1536dbf network and I can't print

  I installed my printer on my home network. Now, my computer can not detect so I can't print.

  I noticed that the printer indicates a different IP address that the router assigns to him and which is visible on the router configuration Web page. Reset of the printer and my router has no effect.

  I had to reset my router a few days due to a failure in broadband. Could be the cause of the problem?

  It turns out that reset the router after the failure in broadband, the other day off the ethernet port to which the printer is conncected. It's strange because the previous resets did not do that.

  Thanks for your help.

• My computer does not detect my built-in webcam, Device Manager indicates this device cannot start (code 10)

  I have a sony vaio laptop model: model PCG - 71912L: VPCEH32FX
  I went on the sony website and downloaded the driver and installed 4 times and still not a not detect.
  I did all the updates and no results.
  They just replaced my laptop screen and which could have been the cause of the problem, maybe it does not detect the new hardware.
  Tried everything I could do so via Device Manager and nothing.
  Please help, thanks.

  Hello

  What is the brand and model of the webcam?

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest you to see the following link for the associated 10 error code.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• Computer does not detect my keyboard (yamaha psr-e323)

  I'm trying to connect my keyboard to my computer vista laptop. I have already installed the driver for my midi cable (tab e-mu 1 x 1) and Yamaha musicsoft downloading. The musicsoft downloader can detect my keyboard, but not the songs I recorded on it, I can not send midi files from my laptop to the keyboard either. Some other programs, audacity and such, can not detect it either. Somehow, only synthesia works perfectly well.

  I thought that this could be because I did not install the midi driver Yamaha, so I downloaded it. However, the installation process did not detect my keyboard either, I just got a message that said I connect my camera while it was connected (midi in-> out,-> out midi in).

  Does anyone know how to fix this?

  Hello

  Contact the manufacturer of keyboard on this issue.

  For reference:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer does not detect blank cd and does not burn cd

  I did a full restore on my pc, nearly a year before and before restoring the computer was able to detect blank CD and burn the cd now after restoring I noticed, it won't detect CD or burn CDs. Pretty well, I did a search on google and tried almost all the tips on adding option "Save" to change the values in the registers. Any advice would be appreciated, thanks in advance.

  HP Compac dc 7700 small form factor

  32 bit

  HP s/n [edited personally identifiable information]

  p/n rw503us

  The version of the BIOS/date: Hewlett-Packard 786E1 v01.09. 05/01/2007

  SMBIOS version: 2.4

  Drive D:
  Description CD-ROM drive
  Loaded media no.
  Type of CD-ROM media
  Name TSSTcorp DVD - ROM TS-H353A
  Manufacturer (Standard CD-ROM drives)
  Status OK
  Transfer rate is not available
  SCSI Target ID 0
  ID device PNP-IDE\CDROMTSSTCORP_DVD-ROM_TS-H353A___BA08___\5 & EC81A8F & 0 & 0.0.0
  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Hello EddieBonza,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are experiencing problems when your optical drive does not recognize blank disc. I'm sorry, but to get your question more than exhibition, I suggest posting in the trade forums, as the Hp Compac dc 7700 small form factor is a commercial product. You can do to the company - Compaq, Elite, Pro PC.
  
  I hope this helps. Thanks for posting on the HP Forums. Have a great day!