My computer does not detect any of my Bluetooth devices

Similar Questions

• My computer does not detect my built-in webcam, Device Manager indicates this device cannot start (code 10)

  I have a sony vaio laptop model: model PCG - 71912L: VPCEH32FX
  I went on the sony website and downloaded the driver and installed 4 times and still not a not detect.
  I did all the updates and no results.
  They just replaced my laptop screen and which could have been the cause of the problem, maybe it does not detect the new hardware.
  Tried everything I could do so via Device Manager and nothing.
  Please help, thanks.

  Hello

  What is the brand and model of the webcam?

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest you to see the following link for the associated 10 error code.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not detect CD players

  I am running Windows XP Professional SP3.

  While I was trying to solve another problem, I made the mistake to delete CDRALW2K. My computer SYS. Now my computer does not detect my CD players in the analysis of FDI, and that they are not listed anywhere in my BONES. Is it possible to recover?

  Hello

  You can run the fix it from the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  See also: "CD recording software will be Cause Windows to become unstable" error message when you start Windows XP: http://support.microsoft.com/kb/315345

• computer does not detect not active LightScribe dvd writer drive.

  Bought in 2009-trusty HP Photosmart C8180 printer all-in-one has a permitted lightscribe dvd burner drive. Worked very well with 32-bit Xp computer.

  Now I have a new computer running Windows 7 64 bit, so had to download software like older software would not work. Printer now works fine again, even wireless. Yesterday I tried to use the dvd player, but my new computer does not detect the dvd on the same printer drive. I love this printer and nothing on the market has the following features for a replacement is not what I want.   Someone at - it suggestions. Cheers from Tasmania

  Tried the software. Its the same thing as what I downloaded when my own outdated software did not work.  I tried to add a USB in addition to the wi - fi connection. The computer then saw the drive. This means that it is the only way it will work or is there some software/driver tweeking or more I can / add to make ALL of the wi - fi function

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576

• HF R600. For some reason, my computer does not detect it.

  So, I don't know why, but my computer, windows 8 (I know..) does not detect my camera, the HF R600. It does not appear in the list of connected devices, the transfer utility said that it is not connected, I'm not sure what to do. Also, I felt that I could ask now as well. IM planning to use with LiteCam game software with the camera providing the embedded video, you get to know if a compatible device for it?

  Try this, with connected usb camera, click the play button under the power button on the camera body?

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• Computer does not detect some files on my Sansa 2 GB Clip

  When I search some songs on my Sansa 2 GB clip, the computer does not find them.  I KNOW they are there, because I played against them many times, but when I go to find the computer, they appear.  I ran looking for countless times, but without success.  Any ideas on why this might be happening?  Any help would be appreciated.

  Songs transferred to the Clip in MSC USB mode is visible on your computer when you are connected to the computer in MSC mode. Similarly with regard to the MTP mode.  Change the settings for the USB on your Clip under it mode.

  Note that Auto will try to connect in MTP mode and then falling back to the CSM.

  One reason why many will be set to MSC mode: to be able to see all the files of all time.

• BlackBerry Smartphones computer does not detect Blackberry

  After you have connected to the computer via USB, there is no evidence in my computer that the Blackberry is not connected even if Mass storage mode is turned on. My computer does not display the device or media card. Desktop manager detects but Media Sync does not work.

  Here, try this. I had the same problem and it worked for me. Got this from another site:

  Mass storage solution... Finally working...

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• After installation, my computer does not detect my Laserjet 1536dbf network and I can't print

  I installed my printer on my home network. Now, my computer can not detect so I can't print.

  I noticed that the printer indicates a different IP address that the router assigns to him and which is visible on the router configuration Web page. Reset of the printer and my router has no effect.

  I had to reset my router a few days due to a failure in broadband. Could be the cause of the problem?

  It turns out that reset the router after the failure in broadband, the other day off the ethernet port to which the printer is conncected. It's strange because the previous resets did not do that.

  Thanks for your help.

• MY HDMI computer does not recognize my TV as audio device

  I have a Samsung (un32f5500ag) TV as monitor, I use with HDMI but I am using speakers separated because my computer does not recognize my TV as a valid speaker, I tried the configuration, I tried to update the drivers, checked outputs from the TV, but when I go to Audio devices, it is not here, I have checked my audio Nvidia also its ok. I don't know what to do, I need my computer to recognize my TV, it only recognizes my TV digital media devices, I need to be the audio device also, could someone help me?

  Hello Adrex,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of incorrect device or audio settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. click Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Sometimes, we need to manually set the TV to the HDMI connection input. We will have to disable improvements audio speaker. Please follow these steps:

  a. press Windows + X keys , and then click Control Panel.
  b. click hardware and sound , then sound.
  c. on the playback tab, click speakers , and then Properties.
  d. click the enhancements tab, and then click "disable all enhancements" checkbox.
  e. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• computer does not detect blank cd and does not burn cd

  I did a full restore on my pc, nearly a year before and before restoring the computer was able to detect blank CD and burn the cd now after restoring I noticed, it won't detect CD or burn CDs. Pretty well, I did a search on google and tried almost all the tips on adding option "Save" to change the values in the registers. Any advice would be appreciated, thanks in advance.

  HP Compac dc 7700 small form factor

  32 bit

  HP s/n [edited personally identifiable information]

  p/n rw503us

  The version of the BIOS/date: Hewlett-Packard 786E1 v01.09. 05/01/2007

  SMBIOS version: 2.4

  Drive D:
  Description CD-ROM drive
  Loaded media no.
  Type of CD-ROM media
  Name TSSTcorp DVD - ROM TS-H353A
  Manufacturer (Standard CD-ROM drives)
  Status OK
  Transfer rate is not available
  SCSI Target ID 0
  ID device PNP-IDE\CDROMTSSTCORP_DVD-ROM_TS-H353A___BA08___\5 & EC81A8F & 0 & 0.0.0
  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Hello EddieBonza,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are experiencing problems when your optical drive does not recognize blank disc. I'm sorry, but to get your question more than exhibition, I suggest posting in the trade forums, as the Hp Compac dc 7700 small form factor is a commercial product. You can do to the company - Compaq, Elite, Pro PC.
  
  I hope this helps. Thanks for posting on the HP Forums. Have a great day!