Computer does not does not correctly detect Fuze?

Similar Questions

• Wireless USB adapter is not correctly detected by XP

  Hello, I have Windows XP SP3 computer in office. I also have a Cisco AE2500 wireless adapter. When I conect the adapter it detects but I go to the Device Manager and it shows as 'unknown' and with a yellow exclamation point. Most of you would say update the drivers, but I already have and they are drivers xp and ive tried uninstalling and reinstalling and it still does not work, please help if you can and thank you!

  I also try with n-300 net gear

  They both work because I tried on other xp computers

  [IMG] http://i41.tinypic.com/2pyst1f.jpg [line]
  http://I41.Tinypic.com/2pyst1f.jpg < view="" snapshot="">

  Hello

  ·         Did you try to plug the device into the other USB port and check if it works?

  ·         Another USB device works fine on the computer?

  Follow these methods and check if it works:

  Method 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  I also suggest you to follow the steps in this Microsoft KB article troubleshooting and check if that helps.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Method 3:

  The main reason for an unknown device to display in your device manager is because you have a device that is not working properly. To resolve this problem, obtain an updated driver for the device. For more information, see this article:

   

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

• PERC S300 does not does not correctly detect the size of HARD drive

  System information:

  T110 II E3-1230 V2 3.30 GHZ Xenon

  8 GB Ram

  Server 2008 R2 Standard - installed to try to fix this problem, the latest OS will WHS 2011

  RAID 1-2 x Samsung Evo 840 SDS

  4 x Seagate ST3000NM0033 company 3 TB 128 MB cache - these discs only come 1.9 TB in the form of Perc. I have the latest firmware (A06) and now the latest version of the bios, the bios is configured to run as UFEI.

  I want to put these 4 all drives in a raid 10, but they will not detect their full size.

  Any help would be appreciated.

  The S300 is a software RAID controller low end and only supports drives up to 2 TB. The H200 and H700 and new controllers supported disks over 2 TB.

• cannot download pictures from my iphone.i been phone with apple and it not the phone, they said some parameters with the computer is not correct

  don't know what to do, can you help?

  Hi cliffbrady9830,

  Welcome to the Microsoft Answers site!

  1. were you able to download photos from Iphone earlier?

  2 recent changes on your computer?

  3. are you any error when uploading pictures?

  4. do you believe that any player of new withdrawal created on the desktop once you connect your Iphone?

  You can try this method.

  If you click Start and in the AutoPlay to start search type and then should see AutoPlay fill under programs select auto play.

  Once in Auto play scroll devices and see if you see your Iphone within devices click the menu drop down and set to import pictures using windows then click ok and then you plug the Iphone and see if it allows you to import.

  Also, if you want to ask you what measures you take whenever you plug in your Iphone to select
  "ask me every time" based on the Auto play.

  The Iphone will not transfer pictures to your computer if the device is locked and you are using an access code. If you want to transfer photos, simply unlock (Slide to unlock and enter the access code) your device to transfer photos.

  Note: Connect Iphone to your computer in unlocked mode.

  For more information on importing photos http://discussions.apple.com/thread.jspa?messageID=7246540

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Fans not correctly detect when you present to the RPM

  Why my 13 "2015 MB Pro fan not totally crank when the cpu temperature is like 100ᴼ? For example my CPU Core 1 is 80ᴼC and my Core 2 CPU is 100ᴼC, my GPU Core even 78ᴼC yet the rest fan 1300 rpm, whereas at this stage at 4000-6000 RPM.

  Is it because I have iStat Menus active? I put rules fan on this OFF application preference so he shouldn't meddle with the fan in addition to giving my sound status.

  I also wonder, Google Chrome would heat my laptop for the h

  Check your MacBook Pro with Apple Hardware Test if thermal sensor is something wrong.

• HP Photosmart c410a: new computer will not let me install the photosmart software... 'enable usb in BIOS '.

  What a waste.  Just bought a new computer with Windows7 Pro descktop installed.  Could not load the HP software by using the cd or download from HP. I get the message below.  New computer and all the usb ports work.

  ANYONE?

  Photosmart c410a

  NMR SDGOB-0826

  p/n is not found

  Thank you

  USB drivers "this computer has no USB software necessary support to allow for the completion of an installation of the USB." The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. To install this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. »

  A USB device "this computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. In order to install this as a USB device, see your computer documentation or documentation for more information USB expansion card. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  In fact his problem with the installation.

  Extract the exe file in a folder using 7zip

  Then delete usbready.exe

  And run setup.exe

  I had this exact error and solved with these exact steps on a new installation of windows with asus motherboard with all the usb ports on work.

  For some reason any the usbready.exe is just trash in some installations and does not correctly detect the usb ports.

  Edit: You can also follow these steps if you do not want / can not install 7zip

  From Windows Explorer type folder in the address bar and press ENTER.

  Locate and open the most recent HP installation folder, which begins with 7z (e.g. 7z1234a).

  Open the installation folder.

  Locate the file named usbready.exe, rename it to usbready1.exe or delete it.

  Go back up a level and start the Setup.exe program.

  Now follow the installation and check the differences.

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• Computer does not detect CD players

  I am running Windows XP Professional SP3.

  While I was trying to solve another problem, I made the mistake to delete CDRALW2K. My computer SYS. Now my computer does not detect my CD players in the analysis of FDI, and that they are not listed anywhere in my BONES. Is it possible to recover?

  Hello

  You can run the fix it from the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  See also: "CD recording software will be Cause Windows to become unstable" error message when you start Windows XP: http://support.microsoft.com/kb/315345

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• My computer does not detect any of my Bluetooth devices

  Help, please!

  Original title: I HAVE 2 BLUETOOTH DIVECES BUT MY com DO NOT WANT TOO ACKNOWLEDGE THAT? What is wrong = (((??? s'il vous plaît m'aider =??)))

  Hello

  Your computer supports BlueTooth? Check with the system manufacturer's support, their documentation online
  and drivers and ask in their forums (if any). If may 3rd party module BlueTooth adapters supported wouldn't
  be necessary.

  =====================================

  If supported these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Add a BlueTooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
  and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
  device coming to your area and when the unit comes out of your area, a new journal line is added with
  the following information: device name, time of the event, address, Type of event ("peripheral
  Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
  View you can also specify a description for each device (according to its MAC address)
  that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  ---------------------------------------------------------------------

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer does not detect my Ipod Touch

  When I plig my ipod touch into my computer nothing happens.  It is not charge or sync.  But it will charge when I plug it into a wall charger.  Other devices work with my usb just not my ipod ports.  y at - it something wrong with my hardware.

  Hello

  You may need an external powered USB hub.

  You should probably check with iPod support as well.

  -IPod support
  http://www.Apple.com/support/iPod/

  Set the MP3 MTP Mode for WMP11 sync - mode MSC to treat the MP3 as a reader.

  ----------------------------------------------------------------------------

  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Make sure that Windows is updated appropriately that there have been several USB updates.

  ----------------------------------------------------------------

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear the specific devices if
  present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You want to delete all instances of the device then restart. -.

  If the above does not work (and it should be considered the preparatory work).

  This works for any MP3 player when the USB stack is not corrupted:

  1 player to delete and restart computer - switch to MTP mode on your MP3 player

  Regardless of what brand of MP3 you have

  1. check this Just In Case

  http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

  2. does not present (web page as reference)

  http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

  In XP: Start - RUN - CMD

  In Vista: (Do this way!)
  
  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  Copy and paste this command into windows XP or Vista CMD - press enter

  NET local service localgroup administrators / add

  3. then follow:

  http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

  I hope that your MP3 now works.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• computer does not detect not active LightScribe dvd writer drive.

  Bought in 2009-trusty HP Photosmart C8180 printer all-in-one has a permitted lightscribe dvd burner drive. Worked very well with 32-bit Xp computer.

  Now I have a new computer running Windows 7 64 bit, so had to download software like older software would not work. Printer now works fine again, even wireless. Yesterday I tried to use the dvd player, but my new computer does not detect the dvd on the same printer drive. I love this printer and nothing on the market has the following features for a replacement is not what I want.   Someone at - it suggestions. Cheers from Tasmania

  Tried the software. Its the same thing as what I downloaded when my own outdated software did not work.  I tried to add a USB in addition to the wi - fi connection. The computer then saw the drive. This means that it is the only way it will work or is there some software/driver tweeking or more I can / add to make ALL of the wi - fi function

• BlackBerry Smartphones computer does not detect Blackberry

  After you have connected to the computer via USB, there is no evidence in my computer that the Blackberry is not connected even if Mass storage mode is turned on. My computer does not display the device or media card. Desktop manager detects but Media Sync does not work.

  Here, try this. I had the same problem and it worked for me. Got this from another site:

  Mass storage solution... Finally working...

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576