HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

Similar Questions

• Laptop does not start: error BCD on Acer Aspire M3-581

  Hello

  Acer Aspire M3 581PTG my son has stopped booting.  At the start, immediately after the Acer logo, it now shows a blue screen with the message:

  Recovery

  Certain required information does not appear in the data of Configuration startup file. File: \BCD Error code: 0xc000000d

  He then refers to using the tools of recovery and the media, but we cannot locate Acer recovery disks and do not remember if the laptop came with everything.  I started by using a normal 8.1 Windows installation CD and tried to use different repair options, but nothing worked (perhaps because Acer has a SSD and HDD so need a specialized repair utility?).

  We contacted Acer but just received a generic response to do a factory reset.  If anyone has encountered this error or is able to offer a solution?

  Thank you.

  Try this:

  http://itsolutionsblog.NET/solution-to-your-PC-needs-to-be-repaired/

  If you still have problems starting, I suspect a hardware failure at this point, maybe the SSD or HARD disk.

  Contact your regional Acer support service.

• Re: My laptop does not start, it cannot detect the hard drive

  I'm having the same problem but a bit different. I noticed that the support said to replace the hard drive and that's what I did with a disc Windows 8.1 and I took a step after test and see if my hard drive is not really usable. I put it in another computer that is also running Windows 8.1. It worked but my origianl computer still does not work, it says always "no drive detected". What the heck!

  think at this point, the best thing to do for you what we call. It is perhaps that the computer is a little less than a year and is still under warranty. Whatever the case, a technical support professional phone can certainly discuss your options with you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• Check the disk does not start if he had to run when you restart the computer.

  I selected automatically fix system errors file and Scan for and attempt recovery of bad sectors.
  I was prompted to reschedule the disk check for the next time you restart your computer. 

  However, when I rebooted my computer, nothing happened. No disk check has been performed. I tried tha procedure above a couple of times without success.
  
  
  Someone please help I was able to do this before, but can't do the job now?  Thank you.

  ACHOIWONG,
  Well, it's system files to discover good good news.  Is probably why chkdsk does not work due to not having permission start upward.  Try to run it from an elevated command prompt:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type chkdsk c:/r

  Try and let us know if it works.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Spooler services printing does not start, error Code 1053

  Original title: Error 1053

  Hello

  my print spooler services do not start. Any help appreciated.

  Hi Paul,.

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with the Printer Spooler service and receive the code error 1053.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after

  a. click the Start button, and type cmd in the box start search

  b. right click on cmd in the list programs and select run as administrator

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  c. at the command prompt, type the following commands and press ENTER after each one

  net stop spooler

  and then

  net start spooler

  This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• Windows XP does not start error Code 0 x 00000024

  I was playing a game oin my 20o5 Windows XP Media Center EDition and then it froze and he died so I decided to reactivate it, but then it went to a blue screen with a code of 0 x 00000024(0x00190203,0x8AD9E0D8,0xc0000102,0x00000000) Please help me I don't know what to do

  Hello

  1. did you of recent changes on the computer?

  2. are you able to boot into Windows after the Blue error screen?

  3. do you have security software installed on the computer?

  This error occurs generally if there are bad sectors on the hard disk.

  I suggest that you perform a CHKDSK scan on the computer by using the recovery console, which would scan for bad sectors on the hard drive will try to get it back.

  1. Insert the Windows XP CD into your CD drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
  2. When the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R
  3. When you are prompted, type the administrator password.
  4. Type: chkdsk /r and press ENTER.

  When you are finished, type exit and your PC will restart and if all goes well start Windows.

  Note: If there is any data on the bad sector on the hard drive, it can be lost. If you can boot into Windows, I would say that you back up the data and continue.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

• Windows Firewall does not start: error code 0 x 80070437

  I can not start the Windows Firewall on my system.

  When you try to start the firewall I get error code: 0 x 80070437
  During the execution of the services as administrator, the Base filtering engine is started.
  Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
  Authorization of firewall Windows Driver is not present.
  How can I get my firewall?
  Thank you
  Hey Conor,
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Computer does not start "Error code: OFOO:137 B.

  When I booted up my pc I got the message "Windows cannot start because the following file is missing or corrupt: \Windows\System32\Config\System you can try to repair this file by starting Windows Setup with the installation of original CD-Rom Select 'r' at the first screen to start repair"then I used a Dell diagnostic tool on my pc with a response from the "error code" : OFOO:137 B ' Msg: IDE device failed: blank media or no media is present in optical drive. "  Tuberculin media with data (Resource CD, CD of Installation) .the given the error code and message can be used by Dell to help diagnose the problem

  Hello

  1. have you made changes on the computer recently?

  Your CD - DVD drive cannot read the disc, I recommend that you contact Dell to check for any physical damage. Once you have the player running, then use the article below:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

• Envy of HP dv7t quad laptop: laptop does not start

  My laptop does not start I get the message.

  Computer does not start. "A required device is not connected or is not accessible.

  Error code: 0xc0000185

  Using diagnostic tools, I get these results:

  Quick check memory: failed

  Hard drive short DST CONTROL: WARNING

  I am "spent" for the rest of the diagnostic checks.

  Thank you

  khosrowbp

  Your hard drive is failing, fast (these things last forever). You need to replace as soon as POSSIBLE. If you have important data on what cannot be replaced I suggest you plug it into another computer as an external drive and pulling all the data you need it off.

  If you do not have the possibility to connect the drive directly on another PC, you can download a live Linux CD/USB.

  Step 1: Acquire a blank CD or USB. If you use a USB port, format it in FAT32.

  Step 2: Insert your chosen in your PC Backup media.

  Step 3: Download Unetbootin.

  Step 4: Select a distribution in the drop-down list. Just about anything will work, but for your application, I would recommend "Puppy Linux".

  Step 5: Select your media.

  Step 6: Once Unetbootin is complete, insert your media in the PC is installed on the corrupted hard drive.

  Step 7: Boot puppy. (You may need to select your Flash DRIVE or a CD in your BIOS)

  Step 8: The use of the included file manager, mount the hard drive and browse for the files you need. You can then save these on another DRIVE or a CD drive, or the internet.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Laptop does not start at the top. I get the message "press ESC to start menu.

  When I start my HP laptop, it goes only to where I get the message 'Press ESC to start menu' and then it freezes completely. Any suggestion would be appreciated. Thank you.

  HI Ron:

  Thank you for your response.

  I send you a link to "Windows 7 does not start" click here

  I also send you one for the "HP System Diagnostics (UEFI)", click here.

  I hope this helps.

  Please let me know the results.

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!