Computer doesn't recognize burner double layer Asus.

Similar Questions

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• Can my laptop burn double layer DVD + R discs?

  Hey, I have a laptop of HP G60-213EM

  And I know that I can burn a DVD + R etc but can I burn double layer DVD + R discs? On my PC, I usually use Verbatim discs double layer. And really want a quick answer if anyone knows if my laptop will burn Verbatim dual layer DVD + discs R. thanks

  Easy trolling for the congratulations but not so easy to give the right info. Yes, you have the DVD Multi burner double layer, so you can burn discs double layer. You must also good burning software. Two layers are difficult to do and you get a lot of roller coaster. The jump from Layer 1 to layer 2 to the burning often causes a problem. The best way to do it is to make a .iso to first and then burn.

  Message edited by Hüffer 22/08/2009 16:30

• I would like to make a simple DVD layer after successful burning double layer. But how?

  Hi all. I have a good DVD double layer of 8.54 GB of a project yet. Now, I would like to make a single-layer disc 4.7 GB or a picture from the same project. How do I do that?

  When I change the settings to disk information, the data remain too large for the small capacity disc/image. I don't know that I'm missing something simple here. Tried searching but couldn't find the answer.

  And also, I'm having a similar problem if I wanted to burn a DVD from a project created for a blu - ray player?

  If you transcoded in Encore, you select the active (not the timeline), right-click and "return to the original." If you transcoded before import into Encore, you go back to the source. You can select the asset and change the transcoding settings of "do not transcode" to a new setting, but this results in undesirable re-compression.

  The question is similar to the first Bluray, but still trails transcode Bluray and DVD separately. Thus, "back them to the original" is not the issue. Still use the original asset, not the assets of Bluray. HOWEVER, if you have imported a file ready Bluray you exported from your application of editing (Pro/Adobe Media Encoder first), then you have the problem of double compression again. Exporting a different file to MPEG2-DVD.

  In addition, HD to SD downrezzing doesn't do well in again.

• Computer doesn't recognize not update Service Pack 1

  Original title: you read these questions? the responses I've read so far say NO

  The question I ask has been requested several times, but the responses I've seen do not address the issue, just to give instructions on how to install SP1, but not how to fix the problem by heart.  SP1 has been installed on several occasions:

  10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

  Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

  The question I ask has been requested several times, but the answers I've seen do not address the issue, just to give instructions by heart on how to install SP1, but not how to fix the problem.  SP1 has been installed on several occasions:

  10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

  Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

  Hello

  We read the questions and try to give solutions to the best of our ability, depending on the quality of the information you provide on the problem.

  We do not work for Microsoft.

  We are mainly volunteers here, just like you, computer users who give free advice from other users in our own spare time.

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  Unless you have the SP1 and SP2 installed, there is no support for Vista; Microsoft support ended.

  You say that you do not have SP1 installed, then of course we give you instructions on how to install it.

  And when you post here complain about anything doesn't work for you, publish a list of the things you have already tried.

  It is not installed if it does not appear under properties

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed (apparently without SP).

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Is my dvd burner double layer?

  I bought my computer a couple of years ago and forget if the DVD drive is a double layer can someone tell me? The model listed under my system info tells me it's the HL-DT-ST DVD +-RW GWA4164B and part number of my said what the MOD UD461, DVD +/-RW, 16, HH, HLDS, 05, 2nd. Thank you

  
  

• DV6 6B47DX laptop with DVD SuperMulti burner. Can burn Double layer DVD?

  I have a one year old laptop and I am trying to burn DVDs. I can't tell if my DVD burner, a DVD SuperMulti burner, can burn DLs manual online user documentation?

  Can anyone help?

  Thank you very much.

  Hello

  I would be pretty certain that it can burn discs double layer, but you can check it using the free application at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• DVD burner double layer

  Hello
  I PLDS DVD + - RW DH - 16ACS ATA Device installed on my desktop, I want to know if she is capable of burning dual layer 8.5 GB DVD-R.

  Thank you

  Angel_op

  Hi Angel_op,

  Yes, the reader should be able to burn DL discs.

• How will I know if I can burn double layer dvd

  ProBook 4720 s;  Core i3; Win 7;    It has a blueray lightscribe.

  Don't know what dvd I can burn. Double (8 + GB) or a single 4.7 GB.  I think I can use either + R - R?

  I never used to burn, once I tried it on a cd and got an error just never needed so far.

  Want to buy media but not sure it takes in charge.

  Thank you!

  Hello

  Please download and run the following tool, it will tell you a lot about the optical drive (ODD) on your computer:

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards.

• Computer doesn't recognize internet connection

  My HP dv6000 family Window Vista premium Service pack 2 64-bit does not recognize my internet connection (local area connection or wireless network connection). The network icon has a red x and it says not connected, but actually I am connected to my wireless network. Also on the network and sharing Center I can't see any connection (no map) but don't forget, there is a connection with my wireless (a Netgear router on my desktop computer); If I open my wireless connection, he said that the network type is an Access Point. How can I change this? How can I make my connection wireless private when the connection does not appear on the network and sharing Center? I deleted my wireless network and set up again and always say the same thing.

  I am able to use the internet, but I can't update any program using the updated window or another service on my laptop. I already did a restore of the system, but all that the same stills. Can anyone help me please with this situation? I have tried everything I know, but nothing seems to work.  Thank you.

  Hello

  I saw the Red X problem before but not with any other questions you have.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  After the foregoing:

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Then:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Do the same for network (NIC) cards - then right click on the devices and UNINSTALL.
  Reboot - it will refresh the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as
  Loves Vista updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART.

  ---------------------------------

  Other tips:

  If you are using a wired cable-

  Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set
  'speed & Duplex' at 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe
  help here: (don't forget the answer is complex, because there are probably more than a single)
  thing at the origin of the problem)

  ---------------------------------

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the wrong network
  device. You can try to disable any other network such as the WiFi device and restart it to see if it
  has an effect.

  Still a hardware such as a network card problem loose which is not properly attached to the computer
  can cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Computer doesn't recognize wireless network

  Original title: NV76R Gateway series win8 wifi

  Peripheral gateway Panel fast lane said wifi is on the computer is not agree it is said off the coast. Was w / the enternet over service provider technical support 5 hours. Right now I am connected w / a 2 ft.  Ethernet cable., someone knows how to do comp recognize wi fi is on... computer recognize not all networks. Before I could activate / deactivate airplane mode and it alternated w / WiFi being on the right side of the computer screen

  I know you it is resolved, but for those who do not, it is this that has worked for me, gateway nv76r series, model VG70, Windows 8...

  1. reboot, and then restarting, keep hitting f2

  2. will take you to a configuration screen

  2. in the configuration screen, Press f9, and then enter

  3. then press f10 and enter.

  Then I got wireless.  I hope this helps...

• Computer doesn't recognize Adobe Acrobat/Distiller and cannot Pdf

  Hello

  I recently installed a new version of Adobe creative suite 4, just like a trial non-registered, but I found that my computer could not manage the programs and began to plant any time, I tried to create a pdf file.

  So I uninstalled only on the part of the package, Acrobat, hoping that I would still be able to use my old 5 from Adobe as a Pdf from Autodesk CAD.

  But now that I uninstalled it, I still can't Pdf. And what is more, my computer is no longer automatically recognizes 5 Adobe as the default program to open Pdf files, it makes me to select the program from a list.

  Is it possible to fix this? Would be to uninstall and reinstall help? Pdfing from CAD is essential to my work.

  Any help would be appreciated to gratly!

  The easiest way is to simply do a repair (Control Panel > Add Remove programs...). For AA5, it will probably appear to change and delete. Select change and you should be able to fix things. If this does not work, then uninstall, delete the folder Acrobat 5 and use the MS. cleanup tool Then, restart and install. Acrobat and Reader are such that if you install several versions, uninstallation of no matter what will most likely break all others - exactly your problem. The problem of the association can be fixed with Windows Explorer, but other things can also be broken that do a repair or reinstall a good idea.

• I had to buy a new computer 1 month ago with Windows 10 on it. I tried to sync time some new music to ITUNES for my ipod. The computer doesn't recognize it. My playlist of library was transferred from my old computer. How can I fix it?

  I had to buy a new PC with windows installed 10. Earlier, I tried to download music from ITUNES to my ipod for the 1st time on the new PC. It does not recognize my ipod. All my playlists were transferred to the new PC. When I go into DEVICES, it says that the iPod software is up to date. What should I do?

  Have you installed the latest version of iTunes, downloaded from here?

  https://www.Apple.com/iTunes/

  It does not recognize my ipod...

  In the latest version of iTunes, the iPod appears in iTunes as a small button of the device on the horizontal bar.  Here is a screenshot of the upper left corner of my window iTunes with my iPod button circled in red.

  

  You don't see the button device the iPod in iTunes when you connect?

• Computer doesn't recognize is not the readers

  Hello!

  So my girlfriends mid 2009 stock 13 '' MacBook Pro HD went crap and I bought a new. It is a Seagate 1 TB hybrid SSD and its a HD approved Seagate and is 100% compatible with the computer. In any case, I got the drive and installed. I have a bootable USB key with OS X El Capitan on it and proceeded to install a new OS on the drive, but about 5 minutes in the installation has failed and asked to restart or shut down and try again (it was also showing the log files).

  I rebooted and held down the option key to display the bootable disks and now nothing appears. I tried to use different external drives, tried to use even the recovery of the internet, different USB ports and nothing works - he plays just the startup sound and a white screen blank forever, until I press the power button to switch it again 10 minutes or later. This continues to be! I have a feeling that the motherboard has gone to sh * but I wanted to post on here to see if anyone had any ideas? I talked to AppleCare and they have nothing in addition to sending the computer in which I do not for the moment.

  I recently reset SMC, NVRAM, started in safe mode, etc all before I ordered and installed the new drive. Should I do it again just to make sure this isn't one of those issues?

  Also forgot to mention that when I installed the new HD, I was able to format of OS X journaled extended, then proceeded to install the new OS.

  Also sometimes the computer actually shows the Apple logo at startup and a status bar (before I select a boot drive) 3 minutes later this black-bordered code (which spans the top of the screen down) appears on the left side of the screen, and then the computer restarts again. -So who plays a role any in everything that's wrong with her.

  Thanks in advance!

  Josh

  Use the diskettes provided with the MBP original Leopard installation.  Your El Capitan USB Installer is maybe damaged.

  If possible, try to install El Capitan with another Mac.

  The Seagate 1 TB SSHD is certainly compatible because I had installed in my MBP.

  Ciao.