Can my laptop burn double layer DVD + R discs?

Similar Questions

• DV6 6B47DX laptop with DVD SuperMulti burner. Can burn Double layer DVD?

  I have a one year old laptop and I am trying to burn DVDs. I can't tell if my DVD burner, a DVD SuperMulti burner, can burn DLs manual online user documentation?

  Can anyone help?

  Thank you very much.

  Hello

  I would be pretty certain that it can burn discs double layer, but you can check it using the free application at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• How will I know if I can burn double layer dvd

  ProBook 4720 s;  Core i3; Win 7;    It has a blueray lightscribe.

  Don't know what dvd I can burn. Double (8 + GB) or a single 4.7 GB.  I think I can use either + R - R?

  I never used to burn, once I tried it on a cd and got an error just never needed so far.

  Want to buy media but not sure it takes in charge.

  Thank you!

  Hello

  Please download and run the following tool, it will tell you a lot about the optical drive (ODD) on your computer:

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards.

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• double layer dvd win 7 x 64 does not burn

  I can't burn a double layer DVD (Memorex) in Win 7 x 64. Used to be able to but not now. Search many forums, no help. DVD burners have inclluded HL, HP 1260 t and Asus BW-12B1ST. All software and drivers up-to-date, I think. Even tried different DVD, no luck. Single layer all mfg all right, just not burn DL. Frustrated.

  If you can, lower the burning speed.  Double layer DVD are much more sensitive and downright temperamental than 4.7 standard.  And as you know, they are 5 or 6 times more expensive, too!

  Good luck.

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• Create recovery media requests double layer DVD

  Good evening everyone.

  I just took delivery of my 5 new books for new employees of my company.

  3 of these notebooks are HP Probook 450 G2 (REF: J4R69EA)

  (These are the models with 128 GB SSD drives)

  The other two are Lenovo E540 with similar specs.

  So let's start, create recovery media. To ensure that is done before I give them to end users in question.

  While trying to create the windows disk, the program "HP Recovery Disc Creator" requires the double layer DVD: "Please insert a DVD double layer to move forward."

  The DVD in question that I use are discs of "Sony DVD + R 120 min / 4.7 GB" that in the past have always worked. (and now work for Lenovo laptops)

  Searching this forum told me to:

  http://support.HP.com/us-en/document/c03481733

  Unfortunately, this is not the same interface I. I choose only a drive to create a backup to

  (in this case, it is drive F:\ internal drive)

  I also tried an external DVD burner with the same results.

  I have not tried a USB, but this isn't what I want, and since you can create a backup set.

  Link to a screenshot: (you must copy paste in your browser apparently)

  http://loxsvc.netau.NET/HP/HP%20Discss.PNG

  It would be not that big of a problem if there was a real windows 7 key printed on the laptop.

  If I had a key, I would just reinstall the machine immediately with an image clean windows 7 so I don't have to clean up all of the HP software.

  but unfortunately this is not the case. So I need a Windows 7 recovery disk must be created.

  Any suggestions apart from the purchase of DVD DL?

  Thank you for your time

  -Sven signed

  Hey @SCamm,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Record double layer DVD-R and DVD + R discs can store much more data. DVD + R DL, also called DVD + R9 are what is needed to create the media recovery on this laptop.  Sorry to say.

  Thank you.

• Computer doesn't recognize burner double layer Asus.

  Original title: Installation disks.

  I installed a burner double layer of Asus which worked fine and was given the drive letter g. My second drive was defective, so I bought a different burner Asus from the same company. I asked the seller if there is a conflict because the two discs were the same. He said no, because the computer would assign a different drive letter to the new drive. When I turned on the computer after the installation it recognized the new hardware and it gave the letter s. When I went to burn data, I noticed that the g drive was gone and the software did not recognize this drive. I restarted the computer and found that the two drives disappeared and I can't access either. Can anyone help please.

  These DVD players would be IDE?  IDE disks need to have the jumpers set to Master or Slave, when connecting TWO drives on the same IDE cable these discs were both probably "sold" with the cavaliers IDE setting 'default' value and they are both the same.  IDE see then the player and the possbily ignore the other «first»

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Problem reading disc double layer, DVD player

  Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

  Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

  Yay for me!

• Problem during construction on a double layer dvd

  Hello! I made a dvd of my vacation with yet, but it was so big (6.62Go) I bought a double layer dvd to build. I have a video set as first game and 3 menus that are auto-activées when we choose a different button (as in the tutorial but linda.com I put a video on the background instead of an image).

  When I start to build, the writing is good but to roughly a little more than one-quarter, still ejects the disc. I tried to read the dvd on my computer and a dvd, but he could not read. Please help me as soon as possible. I worked on this project for several days and I am very proud of the result. I want to really over!

  I use the most recent updated even on a 64-bit windows computer 7.

  I did everything and it did not work

  I'll take that as a 'no' to my question.  So I would simplify to see if you can sort out what works and what is not. Rather than mess with what you have, I create a new project, add a menu, use no autoactivate and no introductory video and import one of your videos as a timeline and just a link.

  Does it work?

  I would try each of the main items that John described too.

• Is - this Dell Inspiron 530 standard come with double-layer DVD ROM?

  I was wondering if the Dell Inspiron 530, I bought a couple of months back has a double layer, DVD ROM drive? I don't know how to find out - I was not put to level or something when you purchase so it is the standard that came with it.

  Thanks in advance

  
  

• Single-layer or double-layer DVD?

  Hello

  I have a DVD for a customer who now wants to make a small number of copies with the help of a third-party software.

  They asked me if he should order single-layer or double-layer DVD? I think the answer is single-layer, but I assure you.

  When I did the DVD, I set the size to 4.7 GB, although I used only 3.21 GB.

  This means that I should tell them to layer single order, right?

  Thank you

  Carolyn

  Right.