Computer doesn't recognize is not the Vista USB devices

Similar Questions

• Computer doesn't recognize is not the readers

  Hello!

  So my girlfriends mid 2009 stock 13 '' MacBook Pro HD went crap and I bought a new. It is a Seagate 1 TB hybrid SSD and its a HD approved Seagate and is 100% compatible with the computer. In any case, I got the drive and installed. I have a bootable USB key with OS X El Capitan on it and proceeded to install a new OS on the drive, but about 5 minutes in the installation has failed and asked to restart or shut down and try again (it was also showing the log files).

  I rebooted and held down the option key to display the bootable disks and now nothing appears. I tried to use different external drives, tried to use even the recovery of the internet, different USB ports and nothing works - he plays just the startup sound and a white screen blank forever, until I press the power button to switch it again 10 minutes or later. This continues to be! I have a feeling that the motherboard has gone to sh * but I wanted to post on here to see if anyone had any ideas? I talked to AppleCare and they have nothing in addition to sending the computer in which I do not for the moment.

  I recently reset SMC, NVRAM, started in safe mode, etc all before I ordered and installed the new drive. Should I do it again just to make sure this isn't one of those issues?

  Also forgot to mention that when I installed the new HD, I was able to format of OS X journaled extended, then proceeded to install the new OS.

  Also sometimes the computer actually shows the Apple logo at startup and a status bar (before I select a boot drive) 3 minutes later this black-bordered code (which spans the top of the screen down) appears on the left side of the screen, and then the computer restarts again. -So who plays a role any in everything that's wrong with her.

  Thanks in advance!

  Josh

  Use the diskettes provided with the MBP original Leopard installation.  Your El Capitan USB Installer is maybe damaged.

  If possible, try to install El Capitan with another Mac.

  The Seagate 1 TB SSHD is certainly compatible because I had installed in my MBP.

  Ciao.

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• PC doesn't recognize me as the administrator

  Separated from this thread.

  my windows 8.1 PC doesn't recognize me as the administrator. I can't make changes on my PC settings. Whenever I just pushes the button, it flashes and does not go to the program, including the store.

  Hello

  Please refer following fix and tell us if it helps:

  http://www.thewindowsclub.com/lost-administrative-rights-in-Windows

  Hope this helps, good luck :)

• My computer is runing but sends not the power of the moniter the mouse or the keyboard. What could be?

  Original title: does not!

  my computer is runing but sends not the power of the moniter the mouse or the keyboard. What could be?

  Hello

  These details are pointing to it is not material.

  If under warranty, I suggest you contact the manufacturer; or if not under warranty get it to a repair shop local and good.

  See you soon...

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Computer laptop Inspiron/Studio 1535 cd/dvd does not recognize is not the disks

  I got a TST Corp DVD +-RW TS - T633A drive that has suddenly stopped working when burning discs & doesn't recognize any disc (CD or DVD) - checked & ugraded BIOS A03 to A05, checked (software so far tp) drivers, checked in the Manager of hardware (device operating properly).  Ran a start-up test & got this error code 0F00:137 B, Msg: DVDRW_1 - Media Player is missing or empty.

  What I'm missing here?

  
  

• Computer doesn't recognize internet connection

  My HP dv6000 family Window Vista premium Service pack 2 64-bit does not recognize my internet connection (local area connection or wireless network connection). The network icon has a red x and it says not connected, but actually I am connected to my wireless network. Also on the network and sharing Center I can't see any connection (no map) but don't forget, there is a connection with my wireless (a Netgear router on my desktop computer); If I open my wireless connection, he said that the network type is an Access Point. How can I change this? How can I make my connection wireless private when the connection does not appear on the network and sharing Center? I deleted my wireless network and set up again and always say the same thing.

  I am able to use the internet, but I can't update any program using the updated window or another service on my laptop. I already did a restore of the system, but all that the same stills. Can anyone help me please with this situation? I have tried everything I know, but nothing seems to work.  Thank you.

  Hello

  I saw the Red X problem before but not with any other questions you have.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  After the foregoing:

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Then:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Do the same for network (NIC) cards - then right click on the devices and UNINSTALL.
  Reboot - it will refresh the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as
  Loves Vista updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART.

  ---------------------------------

  Other tips:

  If you are using a wired cable-

  Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set
  'speed & Duplex' at 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe
  help here: (don't forget the answer is complex, because there are probably more than a single)
  thing at the origin of the problem)

  ---------------------------------

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the wrong network
  device. You can try to disable any other network such as the WiFi device and restart it to see if it
  has an effect.

  Still a hardware such as a network card problem loose which is not properly attached to the computer
  can cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• iTunes doesn't recognize or not restore iphone 5s

  Monday last iTunes stopped recognizing my iPhone 5 s when I plug it to my PC. This also means that it doesn't connect on wifi for my iPad to use hand-off.

  I tried to reinstall iTunes and update iTunes and the phone. I also tried to restore the phone but iTunes doesn't recognize even in recovery mode. I tried to reset the network settings and nothing has worked.

  I don't want to take it to my local dealer because one of the guys he has messed up my old iPhone 5 and I configured on the wrong carrier after giving me 2 messed up phones under warranty.

  Erase all content and settings to fix this or am I just stuck with a phone that does not work with my other devices?

  I thought I had tried all the tips listed before but have not seen the thing on Device Manager. Now it works again.

• Computer doesn't turn off not except by a forced shutdown

  My computer shuts down only about half the time, or maybe less, and then I have to force a stop to the bottom by pressing the Start button on the computer.  I use IE 11 and Windows 7 and this problem started a month ago but I don't remember not something unusual is going on when it started.  Sometimes I let it just keep running and showing that he stops, and when I come back later to check it out, sometimes it is an icon in the task bar stating "Windows".  I can click on and close the icon & then it stops.  But it happened only about three times.  Usually he just keep running and showing it to stop until I have to force a stop down.

  Sometimes, when it starts all first, it flashes a message that a window is not closed and I have to click 'Cancel' and close the window.  But it's frozen so does not help by clicking Cancel.  I was always very careful to close all windows and usually turn off the computer at night.

  Of course, I'd appreciate any help with this problem.  wannierob

  Hello Wannierob,

  Thanks for the quick response.

  This scenario usually indicates a problem with the hardware. Alternatively, the driver can cause this problem. To identify the problem, check the following:

  
  1 overclocking: turn off overclocking to see if the problem occurs when the system is running at the correct speed.

  2. check the memory: check the memory using a memory controller. Check each memory chip is the same speed and that it is configured correctly in the system.

  3. power supply: make sure the power supply is enough power to properly manage installed devices. If you have added memory, installed a newer processor, installed additional disks or added to external devices, such devices may require more energy that the current power supply can provide constantly.

  4 overheating: check if the system is overheated by examining the internal temperature of the equipment.

  5. default values: use the default values of the system, and run the system.

  If you see that the computer generates a Stop error message that contains a BugcheckCode value that is not declared in an event ID 41, change the behavior of the computer restarts. To do this, follow these steps:

  1. right click on my computerand then click Properties.

  2. click on Advanced system settings.

  3. click on the Advanced tab.

  4. in the Startup and recovery section, click settings.

  5. Click to uncheck automatically restart .

  For more information, please refer to this.

  http://support.Microsoft.com/kb/2028504#method3

  Hope the helps of information provided. We know if the given steps helped.

• Time VM synchronizes with host to restart the computer, even if it is not the value. Why?

  I have a virtual machine (Server 2008 R2) that runs on a host ESXi 5.0. The date and time is not on the host computer. Whenever I restart the virtual machine, the time / date on it synchronize with the host computer, even though I have not enabled (in vsphere or vmware tools, see screenshot).

  I adjusted the time on the host, so the time is accurate when I restart the virtual machine now, but how do make sure that the virtual machine does not synchronize the time / date with the host when it is restarted?

  Thanks, I can provide any other information you need.

  In this case, follow this article;

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1189

• 17-f048nr Notebook PC Pavilion: scroll doesn't work do not, the upgrade of Windows 10

  So after much hesitation, I just upgraded to windows 10. Now I regret it.

  I used to be able to scroll by touchpad, now I can't. I researched solutions and tried to go to Snaptics (on my computer, it says "Snaptics Clickpad V8.1" If that tells you anything), but when you click on it it is said:

  "Unable to connect to the Snaptics Pointing Device Driver.

   

  If you have installed a different PS/2 driver pointing device please uninstall the snaptics driver by clicking on the Yes button. You must then reinstall your device pointing to your external device driver again.

   

  You want to uninstall the snaptics driver now? " And then gives the options Yes or no

  I don't know what that means, or what I have to do to fix it. Any help is appreciated!

  Hello

  Try the following.

  First, download the installer of the Synaptics software on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72344.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Open windows control panel and on the top right, next to the display by: select "large icons".  Since the new layout, select the Synaptics entry and check the scrolling options are checked and save any changes - see image below.

  

  Kind regards

  DP - K

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• How can I see/display of the internal usb devices installed on the computer in my computer?

  I can't see the drive letters removable usb in my computer.  However, the removable usb drive letters are visible in disk management.  What can I do to display the letters of removable usb drive in my computer screen?

  Hello

  1. are you not able to see the readers or only the drive letters?

  2 corresponds to the letter displayed when the USB is connected

  I suggest that you try to rename the drive and check if it helps.

  I also suggest that you follow these steps and check if it works

  a. open the location of the computer and click organize.
  b. now, select folder and search options and click on the view tab in any drive
  c. now select the option "show readers, files and hidden folders. Click Ok

  I suggest that you send a screenshot of the screen that you refer to help you better.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  See the link below to find out how to post screenshots or other photos in the forum discussions.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/