Why freeze and restart my computer

Similar Questions

• Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

  Original title: OS time questions continuum (microfeezes)

  It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

  I would like to know if there is other info/specifications that could be useful.

  Thank you.

  Good,

  1:
  Updated the chipset drivers even though it said I was with the best.

  2:
  Run a SFC scan, which revealed no violations of integrity or files not repaired.

  3:
  five hours and 8 infected files later, my computer is totally cleaned.

  I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

  I also ran a memory diagnostic, but all was well.

  What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

  There is a certain mystery. We need Sherlock Holmes.

  -UPDATE

  I have reset the system to its factory settings. Now, it's as if it were new.

  The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

  UPDATE 2-

  The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.

• iMac freezes and restarts 10.11.4 OS

  I have an end 2015 27 "5 K iMac. Since the upgrade to OS 10.11.4, the computer crashes for 15-20 seconds then restarts. I took it to the Genius Bar. There was not a hardware problem. They have restored the system. When I came back, I've set up as if it were brand new. I have installed all the latest versions of the applications from the App Store and directly from some third-party Web sites (all Apple certified). Still, it freezes and restarts. This has been reported as a problem by OS X Daily in an article dated March 26, 2016. However, when I spoke with an Apple Advisor what I had experienced, he still do not think that it was a BONE 10.11.4 question. He told the demand for a second session of Genius Bar because he thinks that it is always a hardware problem. I'll take to be sure. If no hardware problem is discovered, I hope I can convince the technology it is a BONE 10.11.4 problem then it gets fixed in the 11.5 update which was seeded to developers. Everyone knows a problem of freeze and reboot?

  Hi mtnmn, there are a couple of tests, you can try it yourself. Side software, download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information. Dosimetric, you run AHT using Apple Hardware Test - Apple Support. While Apple has the best diagnosis for equipment, it will be at least give you an idea if there is a hardware problem.

  EDIT: in fact, a 2005 iMac does not satisfy the requirements of the system for El Capitan.

  OS X El Capitan - technical specifications

• Freezes and restarts on 2015 5K running El Capitan iMac and am ready to freak me out

  Hi guys,.

  If I posted my check and reports being panic, could someone tell me what caused random freezes and restarts on my iMac 5 K - ish, El Capitan running? I am a designer/Retoucher and I am in the middle of a big job, of course.

  He went on and off for a few months. I have cleared my startup disk and played fresh OS installs (didn't even use Migration Assistant just to be safe), three times. I installed apps one at a time try to refine what is the cause but could not.

  At first I thought it was my mouse Logitech G502 because when I went to an old mouse for a few weeks the problem has disappeared. But yesterday, listening to iTunes via Airplay and working in InDesign, the system froze again.

  I wonder if she might be SoftRAID(4) and/or my two RAIDs of 4 external ThunderBay?

  Thanks in advance!

  Steve

  We can take a stab, please publish a report full of EtreCheck, and if we do not see everything that you can post your last report KP.

• MacBook Pro freezes and restarts when holding

  My Macbook Pro (MacBookPro9, 1 or MD103LL/A 2.3 GHz, OSX 10.11.4 i7) Decides to freeze and restart when lifted with the metal part under the trackpad and around it. It also does the same thing if I let my elbows on the same premises. What may be problem causing it? The machine already fell from anywhere and so, but suddenly decided to act strange. I opened the cover back after this problem and cleaned of dust or debris but did not find a noticeable amount either. The HARD drive has been replaced by an SSD at the Apple Store Amsterdam (Leidseplein) about 3 years ago and the problem has occurred for about a year.

  I would speculate that there is a bad internal connection.  Can you reproduce this every time?  If so, you may be able to locate it.

  Try an Apple Hardware Test.  It could offer a clue:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• WMP 11 says connect burner and restart the computer

  WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer

  Hello

  1. do you get an error message when you try to download files?
  2. you have any third-party burning software installed on your computer?
  3. do you have Internet Explorer 8 is installed on your computer?

  Follow the steps mentioned below and check if it solves the problem with Media Player:

  Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See Your CD or DVD drive cannot read or write media

  Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.

  Refer to this article for help:
  http://support.Microsoft.com/kb/306084

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

  He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE.  Please help me!

  I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!

  Hi stephprice,

  I suggest you follow the articles provided below and check if it helps.

  http://support.Microsoft.com/kb/910339/

  http://support.Microsoft.com/kb/971058

• whenever I try to burn a cd with windows media player, a blue screen appears and restart my computer, what should I do?

  whenever I try to burn a cd, my computer goes to a blue screen and restarting my computer, what should I do?

  Hello

  Most likely, there is a problem with the CD/DVD drive. You can burn a data disc when
  don't use not WMP? Close all programs, put in a flammable disk and use the data method.
  If burning a data disc works then you have any add-ons for WMP12?

  -----------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to know why when I restart the computer and save it that I restart the computer came out black background

  I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please

  Hi linsugr,

  Do you know when this started?  The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure).  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try to go back a little further and see if you are met with success.

  I hope this helps.

  Good luck!

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Freezing and restarted during downloaded gameplay

  Hello! My name is Angie and whenever I try to play my games downloaded, that they freeze and I get a message saying that my ialmrnt5 pilot caused a serious error and I have to restart to replay. I don't know what it is and how to fix it. Any help or advice would be greatly appreciated. And if anyone knows, I have Windows 7? My computer is a Dell Inspiron B120 laptop and then jeutiliser service pack 3.0 and I use IE8 and Windows XP. Thanks in advance!

  Hello
   
  1. What is the name of the game you play?
  2. not this problem occurs only with a particular game or all games?
   
  driver ialmrnt5 is a graphics card intel name discussion, it helps describe the error version or windows, the reference of external download indicator, the value property and drivers software research.
   
  As you use the Intel graphics card on your computer, I suggest you to update the drivers from the link provided below.
   
  http://www.Intel.com/support/detect.htm?IID=dc_iduu

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• error kernel_security_check_failure when starting photoshop 10 Windows and restart the computer every time

  I got this

  error kernel_security_check_failure

  When you try to start Photoshop CC in Windows 10.

  I could open before but now I can never open it it always restart my computer.  I can always use other Adobe applications however.

  Hi pongsatit,

  Please see this thread of photoshop, "the kernel security audit failure" and let us know if this helps.

  Kind regards

  Assani